[Dec 29, 2021] Dumps Collection JN0-362 Test Engine Dumps Training With 67 Questions Juniper JN0-362 Dumps - 100% Cover Real Exam Questions NEW QUESTION 15 Click the Exhibit button.You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true? A. The peer's AS number is misconfigured B. The TCP session is not establishing C. The update [...]

[Dec 29, 2021] Dumps Collection JN0-362 Test Engine Dumps Training With 67 Questions [Q15-Q31]

Share

[Dec 29, 2021] Dumps Collection JN0-362 Test Engine Dumps Training With 67 Questions

Juniper JN0-362 Dumps - 100% Cover Real Exam Questions

NEW QUESTION 15
Click the Exhibit button.

You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?

  • A. The peer's AS number is misconfigured
  • B. The TCP session is not establishing
  • C. The update messages contain an unsupported option
  • D. The neighbor does not support IPv6

Answer: A

 

NEW QUESTION 16
Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?

  • A. vlan_100 has at least one Ethernet interface assigned to it.
  • B. vlan_100 does not have an active Ethernet interface assigned to it.
  • C. vlan_100 does not have an Ethernet interface assigned to it.
  • D. vlan_100 might have an active Ethernet interface assigned to it.

Answer: B

 

NEW QUESTION 17
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers.Which three configuration elements are minimally required in the baseline? (Choose three.)

  • A. protocols rsvp for the appropriate interfaces
  • B. protocols ldp for the appropriate interfaces
  • C. family mpls on the transit interfaces
  • D. protocols mpls for the appropriate interfaces
  • E. family mpls on the loopback interface

Answer: A,C,D

 

NEW QUESTION 18
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)

  • A. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
  • B. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
  • C. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
  • D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
  • E. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.

Answer: C,D,E

 

NEW QUESTION 19
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

  • A. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
  • B. Routes from 10.2.2.2 are less preferred than the default local preference
  • C. Routes from 10.3.3.3 are more preferred than the default local preference
  • D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3

Answer: C

 

NEW QUESTION 20
Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

  • A. to reduce the risk of forwarding traffic through a stateless tunnel
  • B. to mark the tunnel up after the hold-time expires
  • C. to mark the tunnel down after the hold-time expires
  • D. to remove the tunnel interface from inet.0 after the hold-time expires

Answer: A,C

 

NEW QUESTION 21
Which two statements are true about NSR? (Choose two.)

  • A. NSR requires redundant REs.
  • B. NSR requires graceful restart to function properly
  • C. NSR requires GRES to function properly.
  • D. NSR requires only one RE.

Answer: A,C

 

NEW QUESTION 22
Click the Exhibit button.

You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?

  • A. multipath
  • B. type external
  • C. type internal
  • D. export <policy name>

Answer: C

 

NEW QUESTION 23
Click the Exhibit.

You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?

  • A. Export <policy name>
  • B. Type external
  • C. As -override
  • D. Type internal

Answer: D

 

NEW QUESTION 24
Click the Exhibit button.

Referring to the exhibit, which statement is true?

  • A. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
  • B. The router will precalculate a valid path through the network for LSP r1-to-r3
  • C. The router will analyze the traffic engineering database to determine the best path through the network
  • D. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1

Answer: A

 

NEW QUESTION 25
Which two high availability features preserve interface and kernel information during reconvergence? (Choose two.)

  • A. graceful restart (GR)
  • B. graceful Routing Engine switchover (GRES)
  • C. nonstop bridging (NSB)
  • D. nonstop active routing (NSR)

Answer: B,D

 

NEW QUESTION 26
Which two statements are correct about default BGP route propagation? (Choose two.)

  • A. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
  • B. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
  • C. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
  • D. IBGP speakers advertise IBGP-learned routes to other IBGP peers.

Answer: A,C

 

NEW QUESTION 27
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

  • A. path MTU discovery
  • B. end-to-end MTU discovery
  • C. fragmentation discovery
  • D. packet throughput discovery

Answer: A

 

NEW QUESTION 28
Click the Exhibit button.

You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?

  • A. Hello and dead timers are not matching between R1 and R2
  • B. R2 has a wrong area configured
  • C. R1 does not have a router ID defined
  • D. R1 and R2 have the same router ID

Answer: D

 

NEW QUESTION 29
To which multicast address is a VRRP advertisement packet sent?

  • A. 224.0.0.6
  • B. 224.0.0.18
  • C. 224.0.0.13
  • D. 224.0.0.22

Answer: B

 

NEW QUESTION 30
Which statement is true about routing instances on Junos devices?

  • A. Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.
  • B. Junos device support only one routing instance.
  • C. Each routing protocol runs in a separate routing instance.
  • D. Routing information cannot be shared between routing instance.

Answer: A

 

NEW QUESTION 31
......


JN0-362 Exam topics

Candidates must know the topics before they start of preparation because it will really help them solving the problems. Our JN0-362 practice test and CAU-305 practice exams will include the following topics. These are covered in our JN0-362 dumps.


Recommended Training Courses

Now, let’s focus on the recommended online course:

1. Junos Intermediate Routing (JIR)

Excelling in the Junos Intermediate Routing (JIR) course is one of the several ways to improve your chances of passing the actual exam, known as the Juniper JN0-362. This is intense training that runs for 2 days and involves hands-on labs and demonstrations to help you master everything there’s to know about Juniper routing technologies. This class provides a detailed overview of the mentioned test objectives including the features of protocol-independent routing, load balancing, high availability, IP tunneling, BGP, OSPF, and filter-based forwarding. Success in this course requires mastery of the concepts addressed by the Introduction to the Junos Operating System (IJOS) training and a background experience working with the TCP/IP and the Open Systems Interconnection (OSI) model. Also, Juniper highlights all the relevant products and technologies that will help you pass this exam including Automation, Junos OS, M Series, MX Series, PTX Series, T Series, Enterprise Routing and Switching Path, and Service Provider Routing and Switching path. In all, the course content is partitioned into several sections, depending on what the candidates will cover on specific days. Of course, the first session is all about introducing the course. Then, the focus will shift to the first 3 topics including protocol-independent routing, load balancing & filter-based forwarding, and open shortest path first. On the second day, be ready to work with the border gateway protocol, IP Tunneling, and High Availability.

Realistic GuideTorrent JN0-362 Dumps PDF - 100% Passing Guarantee: https://www.guidetorrent.com/JN0-362-pdf-free-download.html