Verified & Correct 350-401 Practice Test Reliable Source Jun 01, 2024 Updated
Free Cisco 350-401 Exam Files Downloaded Instantly
The Cisco 350-401 exam topics of Cisco 350-401 cover a wide range of industry-standard technologies, including Virtual LANs (VLANs), routing protocols (OSPF, BGP, and EIGRP), Quality of Service (QoS), Network Applications and Infrastructure Services, and Network Security. Moreover, the exam also tests candidates' knowledge and understanding of network automation, network programmability, and virtualization technologies such as virtual switching, virtual routing, and overlay networks.
Cisco 350-401 certification exam is a challenging exam that requires a significant amount of preparation and study. Candidates are expected to have a deep understanding of network technologies, protocols, and infrastructure. They must also be familiar with network automation tools and techniques, network security best practices, and network design principles.
Cisco 350-401: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) is a certification exam that tests the knowledge and skills required to implement and troubleshoot enterprise-level routing and switching technologies. 350-401 exam is designed for IT professionals who work with Cisco enterprise network technologies and are looking to validate their skills and knowledge in this area.
NEW QUESTION # 461 
Refer to the exhibit. An engineer must configure an eBGP neighborship to Router B on Router A.
The network that is connected to GO/1 on Router A must be advertised to Router B.
Which configuration should be applied?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 462
A network engineer must configure a switch to allow remote access for all feasible protocols. Only a password must be requested for device authentication and all idle sessions must be terminated in 30 minutes.
Which configuration must be applied?
- A. line console 0
password cisco
exec-timeout 30 0 - B. username cisco privilege 15 cisco
line vty 0 15
transport input telnet ssh
login local
exec-timeout 0 30 - C. line vty 0 15
password cisco
transport input all
exec-timeout 0 30 - D. line vty 0 15
password cisco
transport input telnet ssh
exec-timeout 30 0
Answer: D
NEW QUESTION # 463
Refer to the exhibit. Which configuration must be applied to the HQ router to set up a GRE tunnel between the HQ and BR routers?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
The destination address for the tunnel should be the public IP of the other router, in our case ending with 134.
NEW QUESTION # 464
When a wireless client roams between two different wireless controllers, a network connectivity outage is experience for a period of time. Which configuration issue would cause this problem?
- A. All of the controllers in the mobility group are using the same mobility group name.
- B. All of the controllers within the mobility group are using the same virtual interface IP address.
- C. Not all of the controllers within he mobility group are using the same virtual interface IP address.
- D. Not all of the controllers in the mobility group are using the same mobility group name.
Answer: C
NEW QUESTION # 465 
Refer to the exhibit Which configuration enables password checking on the console line, using only a password?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 466
Which HTTP code must be returned to prevent the script form exiting?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 467
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right
Answer:
Explanation:
NEW QUESTION # 468
Refer to the exhibit. What is the result when a switch that is running PVST+ is added to this network?
- A. Both switches operate in the Rapid PVST+ mode.
- B. Both switches operate in the PVST+ mode
- C. DSW2 operates in Rapid PVST+ and the new switc operates in PVST+
- D. Spanning tree is disabled automatically on the network
Answer: C
Explanation:
From the output we see DSW2 is running in RSTP mode (in fact Rapid PVST+ mode as Cisco does not support RSTP alone). When a new switch running PVST+ mode is added to the topology, they keep running the old STP instances as RSTP (in fact Rapid PVST+) is compatible with PVST+.
NEW QUESTION # 469
Refer to me exhibit.
Refer to the exhibit. An engineer tries to log in to router R1. Which configuration enables a successful login?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: C
NEW QUESTION # 470
Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.
Answer:
Explanation:
Explanation:
A picture containing table Description automatically generated
NEW QUESTION # 471
Refer to the exhibit.
On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-02?
- A. G0/0 and G0/1 on Core
- B. G0/1on Edge-01 and G0/1 on Edge-02
- C. G0/0 on Edge-01 and G0/0 on Edge-02
- D. G0/0 and G0/1 on ASW-01
Answer: B
NEW QUESTION # 472
Which LISP infrastructure device provides connectivity between non-sites and LISP sites by receiving non-LISP traffic with a LISP site destination?
- A. PITR
- B. map resolver
- C. PETR
- D. map server
Answer: A
NEW QUESTION # 473
What is the difference between CEF and process switching?
- A. Process switching is faster than CEF.
- B. CEF processes packets that are too complex for process switching to manage.
- C. CEF is more CPU-intensive than process switching.
- D. CEF uses the FIB and the adjacency table to make forwarding decisions, whereas process switching punts each packet.
Answer: D
Explanation:
NEW QUESTION # 474
Refer to the Exhibit.
An engineer is installing a new pair of routers in a redundant configuration. When checking on the standby status of each router the engineer notices that the routers are not functioning as expected. Which action will resolve the configuration error?
- A. configure unique virtual IP addresses
- B. configure matching priority values
- C. configure matching hold and delay timers
- D. configure matching key-strings
Answer: C
NEW QUESTION # 475
Which statement describes the IP and MAC allocation requirements for virtual machines on types 1 hypervisors?
- A. Each virtual machines requires a unique IP address but shares the MAC address with the address of the physical server.
- B. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
- C. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
- D. Each virtual machine requires a unique IP address but shares the MAC address with the physical server
Answer: C
Explanation:
Explanation
A virtual machine (VM) is a software emulation of a physical server with an operating system.
From an application's point of view, the VM provides the look
and feel of a real physical server, including all its components, such as CPU, memory, and network interface cards (NICs).
The virtualization software that creates VMs and performs the hardware abstraction that allows multiple VMs to run concurrently is known as a hypervisor.
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION # 476
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 477 
A network engineer configures a new GRE tunnel and enters the show run command. What does the output verify?
- A. The default MTU of the tunnel interface is 1500 byte.
- B. The tunnel destination will be known via the tunnel interface
- C. The tunnel keepalive is configured incorrectly because they must match on both sites
- D. The tunnel will be established and work as expected
Answer: B
NEW QUESTION # 478
In a Cisco SD-Access wireless architecture which device manages endpoint ID to edge node bindings?
- A. fabric edge node
- B. fabric wireless controller
- C. fabric control plane node
- D. fabric border node
Answer: C
Explanation:
SD-Access Wireless Architecture Control Plane Node -A Closer Look
Fabric Control-Plane Node is based on a LISP Map Server / Resolver
Runs the LISP Endpoint ID Database to provide overlay reachability information
+ A simple Host Database, that tracks Endpoint ID to Edge Node bindings (RLOCs)+ Host Database supports multiple types of Endpoint ID (EID), such as IPv4 /32, IPv6 /128* or MAC/48 + Receives prefix registrations from Edge Nodes for wired clients, and from Fabric mode WLCs for wireless clients + Resolves lookup requests from FE to locate Endpoints + Updates Fabric Edge nodes, Border nodes with wireless client mobility and RLOC information
NEW QUESTION # 479
Drag and drop the code snippets from the bottom onto the blanks in the Python script to print the device model to the screen and write JSON data to a file Not all options are used
Answer:
Explanation:
Explanation:
NEW QUESTION # 480
Refer the exhibit.
Which router is the designated router on the segment 192.168.0.0/24?
- A. Router NewYork because it has a higher router ID
- B. This segment has no designated router because it is a nonbroadcast network type.
- C. Router Chicago because it has a lower router ID
- D. This segment has no designated router because it is a p2p network type.
Answer: D
NEW QUESTION # 481
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 482
Why would a customer implement an on-premises solution instead of a cloud solution?
- A. On-premises offers greater scalability than cloud.
- B. On-premises oilers shorter deployment time than cloud.
- C. On-premises is more secure man cloud.
- D. On-premises Offers greater compliance for government regulations than cloud
Answer: C
NEW QUESTION # 483
Drag and drop characteristics of PIM dense mode from the left to the right.
Answer:
Explanation:
Explanation
PIM-DM supports only source trees - that is, (S,G) entries-and cannot be used to build a shared distribution tree.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/im PIM dense mode (PIM-DM) uses a push model to flood multicast traffic to every corner of the network. This push model is a brute-force method of delivering data to the receivers. This method would be efficient in certain deployments in which there are active receivers on every subnet in the network. PIM-DM initially floods multicast traffic throughout the network. Routers that have no downstream neighbors prune the unwanted traffic. This process repeats every 3 minutes.
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
In PIM dense mode (PIM-DM), multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
NEW QUESTION # 484
Refer to the exhibit.
Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?
- A. VRF VPN_A
- B. VRF VPN_B
- C. Default VRF
- D. Management VRF
Answer: C
Explanation:
Explanation
There is nothing special with the configuration of Gi0/0 on R1. Only Gi0/0 interface on R2 is assigned to VRF VPN_A. The default VRF here is similar to the global routing table concept in Cisco IOS
NEW QUESTION # 485
......
Pass Cisco 350-401 exam Dumps 100 Pass Guarantee With Latest Demo: https://www.guidetorrent.com/350-401-pdf-free-download.html
The 350-401 PDF Dumps Greatest for the Cisco Exam Study Guide!: https://drive.google.com/open?id=1yfk-3TR5Lf8sEV3qsvR4-ax53597QvoO