Verified 200-301 Dumps Q&As - 200-301 Test Engine with Correct Answers
Pass Your 200-301 Dumps as PDF Updated on 2023 With 875 Questions
Cisco 200-301 exam is a certification test for individuals seeking to become a Cisco Certified Network Associate (CCNA). Cisco Certified Network Associate Exam certification is recognized globally and is a valuable asset for IT professionals seeking to advance their career in networking. 200-301 exam covers a wide range of topics, including network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability.
Cisco 200-301 exam is also an excellent starting point for those who wish to pursue a career in networking. It provides a solid foundation in networking concepts and technologies, which can help candidates to build a successful career in IT. The CCNA certification is also a prerequisite for many other Cisco certifications, such as the Cisco Certified Network Professional (CCNP) and the Cisco Certified Internetwork Expert (CCIE).
NEW QUESTION # 329
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Answer:
Explanation:
NEW QUESTION # 330
What is a zero-day exploit?
- A. It is when an attacker inserts malicious code into a SOL server.
- B. It is when a new network vulnerability is discovered before a fix is available
- C. It is when the perpetrator inserts itself in a conversation between two parties and captures or alters data.
- D. It is when the network is saturated with malicious traffic that overloads resources and bandwidth
Answer: B
Explanation:
https://www.kaspersky.com/resource-center/definitions/zero-day-exploit
NEW QUESTION # 331
Refer to the exhibit.
A network engineer executes the show ip route command on router D. What is the next hop to network 192.168 1 0/24 and why?
- A. The next hop is 10.0.0.1 because it has a better administrative distance
- B. The next hop is 10.0.0.1 because it has a higher metric.
- C. The next hop is 10.0.2.1 because it uses distance vector routing
- D. The next hop is 10.0.2.1 because it is a link-state routing protocol
Answer: D
NEW QUESTION # 332
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 333
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 334
Refer to the exhibit. If OSPF is running on this network,how does Router 2handle traffic from Site B to 10.10.13/25 at Site A?
- A. It cannot send packets to 10.10.13 128/25
- B. It sends packets out of interface Fa0/1 only.
- C. It sends packets out of interface Fa0/2 only.
- D. It load-balances traffic out of Fa0/1 and Fa0/2
Answer: A
Explanation:
Router2 does not have an entry for the subnet 10.10.13.128/25. It only has an entry for
10.10.13.0/25, which ranges from 10.10.13.0 to 10.10.13.127.
NEW QUESTION # 335
When you deploy multilink PPP on your network, where must you configure the group IP Address on each device?
- A. Under the routing protocol
- B. in the global config
- C. Under serial interface
- D. Under the multilink interface
Answer: D
NEW QUESTION # 336
Refer to the exhibit.
What is the effect of this configuration?
- A. The switch port interface trust state becomes untrusted
- B. The switch port remains administratively down until the interface is connected to another switch
- C. The switch port remains down until it is configured to trust or untrust incoming packets
- D. Dynamic ARP inspection is disabled because the ARP ACL is missing
Answer: A
Explanation:
Explanation
Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network. It intercepts, logs, and discards ARP packets with invalid IP-to-MAC address bindings. This capability protects the network from certain man-in-the-middle attacks. After enabling DAI, all ports become untrusted ports.
NEW QUESTION # 337
If all OSPF routers in a single area are configured with the same priority value, what value does a router use for the OSPF router ID in the absence of a loopback interface?
- A. the lowest IP address among its active interfaces
- B. the IP address of the first Fast Ethernet interface
- C. the IP address of the console management interface
- D. the highest IP address among its active interfaces
- E. the priority value until a loopback interface is configured
Answer: D
Explanation:
A router ID is determined in the following order:
1. using the router-id command under the OSPF process to statically configure the router ID.
2. using the highest IP address of the router's loopback interfaces.
3. using the highest IP address of the router's active physical interfaces.
NEW QUESTION # 338
If all OSPF routers in a single area are configured with the same priority value, what value does a router use for the OSPF router ID in the absence of a loopback interface?
- A. the lowest IP address among its active interfaces
- B. the IP address of the first Fast Ethernet interface
- C. the IP address of the console management interface
- D. the highest IP address among its active interfaces
- E. the priority value until a loopback interface is configured
Answer: D
NEW QUESTION # 339
Refer to the exhibit.
The default-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet.
Which action corrects the configuration issue?
- A. Add the always keyword to the default-information originate command on R1.
- B. Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.18 command on R1.
- C. Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.2 command on R2.
- D. Add the default-information originate command on R2.
Answer: B
NEW QUESTION # 340
Which two statements about eBGP neighbor relationships are true? (Choose two)
- A. The two devices must have matching timer settings
- B. They can be created dynamically after the network statement is configured.
- C. Neighbors must be specifically declared in the configuration of each device
- D. The two devices must reside in the same autonomous system
- E. The two devices must reside in different autonomous systems
Answer: C,E
Explanation:
Just like OSPF or EIGRP, BGP establishes a neighbor adjacency with other BGP routers before they exchange any routing information. Unlike other routing protocols however, BGP does not use broadcast or multicast to "discover" other BGP neighbors.
Neighbors have to be configured manually and BGP uses TCP port 179 for the connection.
NEW QUESTION # 341
Refer to the exhibit. Which two statements are true about the loopback address that is configured on RouterB?
(Choose two.)
- A. It decreases the metric for routes that are advertised from RouterB.
- B. It indicates that RouterB should be elected the DR for the LAN.
- C. It specifies that the router ID for RouterB should be 10.0.0.1.
- D. It ensures that data will be forwarded by RouterB.
- E. It provides stability for the OSPF process on RouterB.
Answer: C,E
Explanation:
Section: IP Connectivity
NEW QUESTION # 342
After you deploy a new WLAN controller on your network, which two additional tasks should you consider? (choose two)
- A. configure additional security policies
- B. configure additional vlans
- C. configure multiple VRRP groups
- D. deploy POE switches
- E. deploy load balancers
Answer: A,E
NEW QUESTION # 343
What are two reasons that duplex mismatches can be difficult to diagnose? (Choose two.)
- A. Full-duplex interfaces use CSMA/CD logic, so mismatches may be disguised by collisions.
- B. Autonegotiation is disabled.
- C. 1-Gbps interfaces are full-duplex by default.
- D. The interface displays a connected (up/up) state even when the duplex settings are mismatched.
- E. The symptoms of a duplex mismatch may be intermittent.
Answer: D,E
NEW QUESTION # 344
A network engineer must back up 20 network router configurations globally within a customer environment.
Which protocol allows the engineer to perform this function using the Cisco IOS MIB?
- A. SMTP
- B. ARP
- C. SNMP
- D. CDP
Answer: C
NEW QUESTION # 345
Refer to the exhibit.
Which route type is configured to reach the internet?
- A. default route
- B. host route
- C. floating static route
- D. network route
Answer: A
NEW QUESTION # 346
Drag and drop the characteristics of network architectures from the left onto the type of architecture on the right.
Answer:
Explanation:
NEW QUESTION # 347
In which situation would the use of a static route be appropriate?
- A. To provide access to the Internet for enterprise hosts.
- B. To reach a network is more than 15 hops away.
- C. To configure a route when the administrative distance of the current routing protocol is too low.
- D. To configure a route from an ISP router into a corporate network.
- E. To configure a route to the first Layer 3 device on the network segment.
Answer: D
NEW QUESTION # 348
A Cisco engineer at a new branch office is configuring a wireless network with access points that connect to a controller that is based at corporate headquarters Wireless client traffic must terminate at the branch office and access-point survivability is required in the event of a WAN outage Which access point mode must be selected?
- A. Lightweight with local switching disabled
- B. Local with AP fallback enabled
- C. OfficeExtend with high availability disabled
- D. FlexConnect with local switching enabled
Answer: C
NEW QUESTION # 349
What is a DHCP client?
- A. a host that is configured to request an IP address automatically
- B. a server that dynamically assigns IP addresses to hosts.
- C. a workstation that requests a domain name associated with its IP address
- D. a router that statically assigns IP addresses to hosts.
Answer: A
NEW QUESTION # 350
How does encryption project the wireless network?
- A. via specific ciphers to detect and prevent zero-day network attacks
- B. via an algorithm to change wireless data so that only the access point and client understand it
- C. via integrity checks to identify wireless forgery attacks in the frame
- D. via a policy to prevent unauthorized users from communicating on the wireless network
Answer: B
NEW QUESTION # 351
Refer to Exhibit.
Which action do the switches take on the trunk link?
- A. The trunk forms but the mismatched native VLANs are merged into a single broadcast domain.
- B. The trunk forms but VLAN 99 and VLAN 999 are in a shutdown state.
- C. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link.
- D. The trunk does not form and the ports go into an err-disabled status.
Answer: A
Explanation:
Explanation
The trunk still forms with mismatched native VLANs and the traffic can actually flow between mismatched switches. But it is absolutely necessary that the native VLANs on both ends of a trunk link match; otherwise a native VLAN mismatch occurs, causing the two VLANs to effectively merge.
For example with the above configuration, SW1 would send untagged frames for VLAN 999. SW2 receives them but would think they are for VLAN 99 so we can say these two VLANs are merged.
NEW QUESTION # 352
......
Cisco Certified Network Associate (CCNA) is a widely recognized certification program offered by Cisco Systems. The CCNA certification is designed to validate an individual’s skills and knowledge in the field of network engineering. The latest version of the CCNA certification is the Cisco 200-301 exam, which is a comprehensive and updated version of the previous CCNA exams. The new exam focuses on modern networking technologies and concepts, including security, automation, and programmability.
Pass Cisco 200-301 Exam Info and Free Practice Test: https://www.guidetorrent.com/200-301-pdf-free-download.html
Cisco 200-301 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1VIhs39MxUsqxyGNV1GA5YCap_QD3BV9x