Get New 2024 Cisco exam 200-301 Dumps Bundle On flat Updated Dumps!
Full 200-301 Practice Test and 940 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 529
Refer to the Exhibit.
Connectivity between three routers has been established, and IP services must be configured jn the order presented to complete the implementation Tasks assigned include configuration of NAT, NTP, DHCP, and SSH services.
1. All traffic sent from R3 to the R1 Loopback address must be configured for NAT on R2. All source addresses must be translated from R3 to the IP address of Ethernet0/0 on R2, while using only a standard access list named NAT To verify, a ping must be successful to the R1 Loopback address sourced from R3. Do not use NVI NAT configuration.
2. Configure R1 as an NTP server and R2 as a client, not as a peer, using the IP address of the R1 Ethernet0/2 interface. Set the clock on the NTP server for midnight on January 1, 2019.
3. Configure R1 as a DHCP server for the network 10.1.3.0/24 in a pool named TEST. Using a single command, exclude addresses 1-10 from the range. Interface Ethernet0/2 on R3 must be issued the IP address of 10.1.3.11 via DHCP.
4. Configure SSH connectivity from R1 to R3, while excluding access via other remote connection protocols. Access for user root and password Cisco must be set on router R3 using RSA and 1024 bits. Verify connectivity using an SSH session from router R1 using a destination address of 10.1.3.11. Do NOT modify console access or line numbers to accomplish this task.
- A. See the Explanation below
Answer: A
Explanation:
Answer as below configuration:
conf t
R1(config)#ntp master 1
R2(config)#ntp server 10.1.2.1
Exit
Router#clock set 00:00:00 jan 1 2019
ip dhcp pool TEST
network 10.1.3.0 255.255.255.0
ip dhcp exluded-address 10.1.3.1 10.1.3.10
R3(config)#int e0/3
R3(config)#int e0/2
ip address dhcp
no shut
crypto key generate RSA
1024
Copy run start
NEW QUESTION # 530
Refer to the exhibit.
Which command provides this output?
- A. show cdp neighbor
- B. show interface
- C. show ip interface
- D. show ip route
Answer: A
NEW QUESTION # 531
What is a function of Wireless LAN Controller?
- A. monitor activity on wireless and wired LANs
- B. register with a single access point that controls traffic between wired and wireless endpoints.
- C. send LWAPP packets to access points.
- D. use SSIDs to distinguish between wireless clients.
Answer: C
Explanation:
Lightweight APs (LAPs) is devices require no initial configuration. LAPs use the Lightweight Access Point Protocol (LWAPP) to communicate with a WLAN controller (WLC), as shown in the below figure. Controller-based APs are useful in situations where many APs are required in the network. As more APs are added, each AP is automatically configured and managed by the WLC.
NEW QUESTION # 532
Which two passwords must be supplied in order to connect by Telnet to a properly secured Cisco switch and make changes to the device configuration? (Choose two.)
- A. vty password
- B. aux password
- C. tty password
- D. enable secret password
- E. console password
- F. username password
Answer: A,D
NEW QUESTION # 533
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION # 534
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION # 535
Refer to the exhibit.
Which switch becomes the root bridge?
- A. S4
- B. S2
- C. S1
- D. S3
Answer: C
NEW QUESTION # 536
Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?
- A. ipv6 address 2001:DB8:5:112::/64 eui-64
- B. ipv6 address 2001:DB8:5:112::2/64 link-local
- C. ipv6 address autoconfig
- D. ipv6 address dhcp
Answer: C
Explanation:
Section: Network Fundamentals
Explanation:
The "ipv6 address autoconfig" command causes the device to perform IPv6 stateless address auto- configuration to discover prefixes on the link and then to add the EUI-64 based addresses to the interface.
Addresses are configured depending on the prefixes received in Router Advertisement (RA) messages. The device will listen for RA messages which are transmitted periodically from the router (DHCP Server). This RA message allows a host to create a global IPv6 address from:
* Its interface identifier (EUI-64 address)
* Link Prefix (obtained via RA)
Note: Global address is the combination of Link Prefix and EUI-64 address
NEW QUESTION # 537
An organization has decided to start using cloud-provided services. Which cloud service allows the organization to install its own operating system on a virtual machine?
- A. platform-as-a-service
- B. network-as-a-service
- C. software-as-a-service
- D. infrastructure-as-a-service
Answer: C
Explanation:
Below are the 3 cloud supporting services cloud providers provide to customer:
+ SaaS (Software as a Service): SaaS uses the web to deliver applications that are managed by a thirdparty vendor and whose interface is accessed on the clients' side. Most SaaS applications can be run directly from a web browser without any downloads or installations required, although some require plugins.
+ PaaS (Platform as a Service): are used for applications, and other development, while providing cloud components to software. What developers gain with PaaS is a framework they can build upon to develop or customize applications. PaaS makes the development, testing, and deployment of applications quick, simple, and cost-effective. With this technology, enterprise operations, or a thirdparty provider, can manage OSes, virtualization, servers, storage, networking, and the PaaS software itself. Developers, however, manage the applications.
+ IaaS (Infrastructure as a Service): self-service models for accessing, monitoring, and managing remote datacenter infrastructures, such as compute (virtualized or bare metal), storage, networking, and networking services (e.g. firewalls). Instead of having to purchase hardware outright, users can purchase IaaS based on consumption, similar to electricity or other utility billing.
In general, IaaS provides hardware so that an organization can install their own operating system.
NEW QUESTION # 538
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Answer:
Explanation:
NEW QUESTION # 539
Drag and drop the IPv6 address details from the left onto the corresponding types on the right.
Answer:
Explanation:
NEW QUESTION # 540
Refer to the exhibit.
An engineer is configuring the New Your router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path.
Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two.)
- A. Ipv6 route 2000::1/128 2012::2
- B. Ipv6 route 2000::1/128 2012::1
- C. Ipv6 route 2000::1/128 2023::3 5
- D. Ipv6 route 2000::1/128 2012::1 5
- E. Ipv6 route 2000::1/128 2023::2 5
Answer: B,C
NEW QUESTION # 541
Refer to the exhibit.
An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.
Answer:
Explanation:
NEW QUESTION # 542
How does HSRP provide first hop redundancy?
- A. It load-balances traffic by assigning the same metric value to more than one route to the same destination m the IP routing table.
- B. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN.
- C. It uses a shared virtual IMC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN
- D. It forwards multiple packets to the same destination over different routed links n the data path
Answer: D
NEW QUESTION # 543
What is a practice that protects a network from VLAN hopping attacks?
- A. Configure an ACL to prevent traffic from changing VLANs
- B. Change native VLAN to an unused VLAN ID
- C. Enable dynamic ARP inspection
- D. Implement port security on internet-facing VLANs
Answer: B
Explanation:
Section: Security Fundamentals
NEW QUESTION # 544
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Answer:
Explanation:
NEW QUESTION # 545
......
[Apr-2024] Pass Cisco 200-301 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1TgRcbP4qPzmjZyAoMrL5ZzFBPBJRmZaN
Reduce Your Chance of Failure in 200-301 Exam: https://www.guidetorrent.com/200-301-pdf-free-download.html