Latest [Dec 06, 2021] NCM-MCI5.15 Exam Dumps - Valid and Updated Dumps
Free Sales Ending Soon - 100% Valid NCM-MCI5.15 Exam Dumps with 108 Questions
NEW QUESTION 38
An administrator learns that some security settings in a cluster have been changed. The environment is out of compliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?
- A. Defense Information Systems Agency STIG enforcement
- B. Security Configuration Management Automation (SCMA)
- C. Cluster Lockdown with strong password enforcement
- D. Advanced Intrusion Detection Environment (AIDE)
Answer: B
Explanation:
Ref: http://myvirtualcloud.net/nutanix-scma-the-security-feature-that-could-save-your-organization/
NEW QUESTION 39
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Leap
- B. Asyn&DR
- C. Metro Availability
- D. NearSync
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_Data_Protection
NEW QUESTION 40
A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?
- A. Start with a cluster containing three or more nodes
- B. Plate the SAP HANA Database on the same socket as CVM
- C. Do not enable compression, deduplication. or erasure coding on the storage container
- D. Enable only compression for the container that contains the Production database
Answer: C
Explanation:
Ref:
NEW QUESTION 41
An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to the Internet.
Which two steps must be completed to update the firmware? (Choose two.)
- A. Configure LCM with a URL to access the firmware bundle.
- B. Download a dark site bundle and stage it on an internal webserver.
- C. Download the updated firmware .tgz file from the Nutanix portal.
- D. Select Upgrade Software, then select disks and upload the updated firmware.
Answer: A,B
NEW QUESTION 42
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. Hard
- B. Soft
- C. External
- D. Internal
Answer: B
Explanation:
NEW QUESTION 43
A company needs to replicate their VMs to a remote site and must have an RPO of less than 1 hour.
When creating a protection domain, what should an administrator do to meet this requirement?
- A. Enable Async Replication with an RPO of 60 minutes
- B. Enable Entity Sync on the designated VMs
- C. Enable Availability Zones and send the VM to multiple targets
- D. Enable Near-Sync Replication with an RPO of 15 minutes
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:sto-pd-guidelines-r.html
NEW QUESTION 44
A CEO asks the IT administrator to provide a list of required resources to protect current workloads and the two new SQL servers from a disaster. The Nutanix environment is managed by Prism Central.
Which option explains how to meet the CEO's request?
- A. In Capacity Runway, select Optimize Resources and select all VMs that must be protected.
- B. Create a new Recovery policy by selecting the VM that needs to be protected and get hardware requirements.
- C. Create a new scenario based on a new cluster based on a VM Profile and select Recommend.
- D. Create a new project and assign the VMs to it to get compute and storage requirements.
Answer: B
NEW QUESTION 45
The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?
- A. There is a VLAN misconfiguration on the switch.
- B. The vNIC port is disconnected on the affected VMs.
- C. Jumbo Frame are misconfigured across ports.
- D. There is a VLAN misconfiguration on the VMs.
Answer: A
NEW QUESTION 46
Over the period of 2 to 3 weeks, a cluster displays the following:
* Periods where Warning Alerts of memory usage over 75% are asserted
* Periods where Critical Warnings of memory usage over 90% are asserted
* Periods of slow of frozen VDI desktops have caused work stoppage or slowdown
* VDI clones have periodically not powered up when called, causing work stoppage Which steps should be used to prioritize the administrator's troubleshooting efforts?
- A. * Check Analysis page for CPU demand
* Verify VDI workload property for memory subscription
* Review the Hardware page to determine if the cluster has sufficient RAM - B. * Assess resource health on Hardware page
* Review the Analysis page for memory usage demand
* Determine the VDI workload-to-host affinity across the cluster - C. * Analyze Alert Pages for a root cause of memory problem
* Analyze VM table page to access the VM functionality
* Analyze the VDI Clone properties for possible VDI Workload stress - D. * Review Analysis Page for memory use pattern
* Alert with VDI workload demand
* Analyze current and future workload in the Capacity Runaway tab for sufficient resources
Answer: D
NEW QUESTION 47
A guest VM is reported to have poor storage performance. It has an I/O profile of 80% read. 20% write, and the HDDs form more than 50% of the read source.
What should an administrator do to resolve this issue?
- A. Increase the OPLOG
- B. Use HDDs with higher RPM
- C. Increase SSD capacity
- D. Increase the write cache
Answer: C
Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2126-SAS-on-Nutanix:BP-2126-SAS-on-Nutanix
NEW QUESTION 48
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
- A. Stop all Nutanix Files clusters
- B. Relocate the linked LDAP servers
- C. Shut down all user VMs in the cluster
- D. Reconfigure IPMI for the new datacenter
Answer: A,C
Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/physical-relocation-of-nutanix-clusters-38403
NEW QUESTION 49
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Compression, Deduplication, and Erasure Coding
- B. Deduplication and Erasure Coding
- C. Compression only
- D. Compression and Deduplication
Answer: B
Explanation:
Ref:
NEW QUESTION 50
An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?
- A. Post-Process Compression
- B. Flash Mode
- C. Inline Compression
- D. Cache Dedup
Answer: A
NEW QUESTION 51
An administrator receives reports that VDI desktop performance in an 8-node Nutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
* CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Add memory to the nodes in the cluster.
- B. Increase the amount of SSD storage in the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Add CPU resources to the cluster.
Answer: D
NEW QUESTION 52
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed. The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create a firewall rule that blocks VM traffic but permits diagnostic access
- B. Disable the vNIC on the affected VM
- C. Quarantine the VM using the Forensic Method
- D. Create a security policy with a service chain directing that VMs traffic to the firewall VM
Answer: C
Explanation:
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 53
An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?
- A. 0 minutes
- B. 15 minutes
- C. 6 hours
- D. 1 hour
Answer: B
Explanation:
Ref: https://support-portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-domain-wc-c.html
NEW QUESTION 54
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. Customer must then manually power off VMs at Site A and power them on at Site B.
- B. VMs get deleted from Site A and the protection domain is no longer active.
- C. VMs are powered off on Site A and must be manually powered on at Site B.
- D. VMs get deleted from Site B. and the protection domain is now Active.
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-domain-failback-disaster.html
NEW QUESTION 55
......
NCM-MCI5.15 Exam Dumps - 100% Marks In NCM-MCI5.15 Exam: https://www.guidetorrent.com/NCM-MCI5.15-pdf-free-download.html