2024 Easily pass D-VXR-DY-01 Exam with our Dumps & PDF Test Engine
D-VXR-DY-01 PDF Pass Leader, D-VXR-DY-01 Latest Real Test
NEW QUESTION # 201
When preparing for a VxRail deployment, which components require forward and reserve DNS records?
- A. ESXi hosts, vCenter, and vRealize Operations
- B. ESXi hosts, vRealize Log Insight, and Platform Services Controller
- C. Platform Services Controller. vCenter, and ESRS/VE
- D. ESXi Hosts, vCenter, and ESRS/VE
Answer: B
NEW QUESTION # 202
A company has chosen to deploy an external vCenter/PSC. They would like to use the bundled vCenter license that comes with VxRail.
What is the correct procedure to do this?
- A. Contact EMC Licensing to have a replacement vCenter license generated.
- B. Bundled vCenter license is only valid when vCenter is internally deployed. The company must provide their own vCenter license.
- C. Contact VMware Licensing to have a replacement vCenter license generated.
- D. Log into VxRail Manager through SSH and extract the vCenter license key from the application properties file.Next, license the newly created vCenter.
Answer: C
NEW QUESTION # 203
What is the default VLAN that is configured on the nodes and is used for device discovery during initial implementation and node expansion?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 204
For how many days are the vSphere evaluation licenses valid in a new VxRail implementation?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 205
A company has indicated that they do not want to change the native VLAN for their entire switch.
Based on best practice, how should the Top of Rack (ToR) switch be configured?
- A. Set the native VLAN only at the VxRail trunk ports
- B. Do not configure ToR switch native VLAN and instead tag the VLAN on VxRail
- C. The native VLAN for the switch must be set
- D. Set the native VLAN on the switch ISL ports
Answer: D
NEW QUESTION # 206
Which Dell EMC Networking Operating System OS10 CLI command allows the user to confirm that SmartFabric Services have been enabled for a VxRail?
- A. switchport mode access
- B. show interface status
- C. show switch-operating-mode
- D. show access-lists
Answer: C
NEW QUESTION # 207
An ESRS deployment on a VxRail system with external vCenter fails with "Invalid target datastore specified".
What is required to resolve this problem?
- A. Manually deploy ESRS
- B. Open a Service Request to involve support
- C. Restart vCenter services and retry the deployment
- D. Retry deployment through the retry button
Answer: C
NEW QUESTION # 208
In a VxRail deployment with an external vCenter Server, which VMware component(s) is automatically licensed?
- A. vSAN only
- B. vCenter and vSphere only
- C. vCenter, vSAN, and vSphere
- D. vCenter and vSAN only
Answer: A
NEW QUESTION # 209
When validating the completed VxRail PEQ, you note the following VLANs in the configuration:\
- VxRailManagement - VLAN 120
- vSAN - VLAN 121
- vMotion - VLAN 122
- Servers - VLAN 204
- NetManagement - VLAN 208
Which command should you use to validate that the VLANs are configured on each Dell EMC ToR switch?
- A. show interfaces status
- B. show vlan
- C. show running-config spanning-tree
- D. show interfaces port-channel brief
Answer: B
NEW QUESTION # 210
What is the minimum number of VxRail nodes required for a vSAN storage policy with FTT = 2 an6 FTM set to Erasure Coding?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 211
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches.
Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?
- A. show port-channel summary
- B. show network-policy profile
- C. show interface status
- D. show interface
Answer: A
NEW QUESTION # 212
What is the minimum number of VxRail hosts required if FTT = 1 and FTM is set to Erasure Coding?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 213
You are expanding the capacity of a Hybrid VxRail by creating an additional disk group. The new disk group will be composed of five drives on all participating cluster nodes.
When you attempt to add the new disks to the vSAN datastore you receive an error message about there being no cache tier available.
What is the likely cause?
- A. All the drives are labeled as HDDs
- B. vSAN supports disk groups with four drives or fewer
- C. Cluster requires vSAN Advanced or Enterprise license upgrade
- D. You attempted to add the disks to the existing disk group
Answer: A
NEW QUESTION # 214
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?
- A. Network configuration and performance for vSAN
- B. Latency and bandwidth measurement to the witness host
- C. Network performance for virtual machines
- D. Latency measurement between DCs for Stretched Clusters
Answer: A
NEW QUESTION # 215
What is configured by default during the initial deployment of a VxRail cluster with All-Flash nodes?
- A. AID-1 vSAN storage policy
- B. vSAN Deduplication and compression
- C. RAID-5 vSAN storage policy
- D. vSAN Performance Service
Answer: A
NEW QUESTION # 216
Match each IDRAC Maintenance page tab to its description.
Answer:
Explanation:
NEW QUESTION # 217
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?
- A. D Series
- B. E Series
- C. V Series
- D. G Series
Answer: B
NEW QUESTION # 218
When resetting a Dell PowerEdge-based VxRail node to an existing factory image, which boot device should be selected?
- A. BOSS
- B. IDSDM
- C. SATADOM
- D. RASRUSB
Answer: B
NEW QUESTION # 219
What is a characteristic of the VxRail S Series node?
- A. Form factor of 2U4N
- B. Large form factor drives
- C. Dense Flash disks
- D. Form factor of 1U1N
Answer: D
NEW QUESTION # 220
Which port configuration is invalid on the integrated NIC of a VxRail node?
- A. 2 x 1 GbE RJ45
- B. 2 x 10 GbE RJ45
- C. 2 x 25 GbE SFP28
- D. 2 x 10 GbE SFP+
Answer: A
NEW QUESTION # 221
Match each VxRail data protection solution with its functionality.
Answer:
Explanation:
1 - C
2 - A
3 - D
4 - B
NEW QUESTION # 222
The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption.
What is the correct configuration to satisfy this requirement?
- A. External vCenter External PSC
- B. Embedded vCenter Embedded PSC
- C. External vCenter Embedded PSC
- D. Embedded vCenter External PSC
Answer: A
NEW QUESTION # 223
Which integrated backup solution is included with VxRail at no additional cost?
- A. VMware VM Snapshots
- B. Dell EMC Data Protection Suite
- C. VMware vSphere Data Protection
- D. Dell EMC NetWorker
Answer: C
NEW QUESTION # 224
......
D-VXR-DY-01 Dumps Ensure Your Passing: https://www.guidetorrent.com/D-VXR-DY-01-pdf-free-download.html
Valid D-VXR-DY-01 Test Answers & D-VXR-DY-01 Exam PDF: https://drive.google.com/open?id=1Dx-bve7aOuC08wO5WJcsTpIWzV4Z01kD