Updated Jan-2022 Pass 301a Exam - Real Practice Test Questions [Q10-Q29]

Updated Jan-2022 Pass 301a Exam - Real Practice Test Questions

Download Free F5 301a Real Exam Questions

How to Prepare For F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Preparation Guide for F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Introduction

An F5 Certified BIG-IP Administrator can handle application delivery networks (ADNs) and F5 Traffic Management Operating System (TMOS) devices, as well as conduct routine management and troubleshooting. The F5-CA qualification requires passing two exams:

Exam 101-Fundamentals of Application Delivery
Exam 301a-TMOS Administration

Pre-existing BIG-IP implementations and provisional fault isolation are managed by an F5 Certified BIG-IP Administrator. They must be able to edit BIG-IP artefacts and make appropriate configuration adjustments. They’re still in charge of application delivery networks (ADNs) and managing and troubleshooting F5 Traffic Management Operating System (TMOS) devices on a regular basis. These Certified Experts manage BIG-IP infrastructure such as virtual servers, pools, pool owners, nodes, accounts, and displays using TMSH and a setup utility. They also maintain BIG-IP repositories and build, rebuild, and manage them. Certified BIG-IP Administrators must therefore review the state, functionality, and statistics of a resource in order to consider how BIG-IP networks are actually handling traffic.

The function of BIG-IP systems as a proxy mechanism inside an ADN is defined by administrators. BIG-IP devices are set up, licensed, and provisioned by them. Profiles are used by a Certified BIG-IP Administrator to monitor how BIG-IP networks handle traffic across virtual servers. They’re also in need of utilizing different medical methods to troubleshoot and diagnose issues. After it has been mounted, configured, and applied, passing this exam demonstrates independence in conducting day-to-day operations and simple troubleshooting of TMOS-based systems in different application environments. Individuals may opt to finish their credential path here or go on to the Technical Professional, Technical Specialist, Cloud, or Security Solutions tracks. In this guide we will cover all the aspects of F5-301a dumps and F5-301a practice exams.

NEW QUESTION 10
The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.
How should the LTM Specialist configure this route?

A. Tmsh modify net route 10.10.22/24 gw 30.30.30.158
B. Tmsh changey net route 10.10.22/24 gw 30.30.30.158
C. Tmsh add net route 10.10.22/24 gw 30.30.30.158
D. Tmsh create net route 10.10.22/24 gw 30.30.30.158

Answer: D

NEW QUESTION 11
An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.
What should be added to increase the performance of the device?

A. smaller key to the SSL profile
B. a One Connect profile
C. an HTTP Compression profile
D. a SPDY profile

Answer: B

NEW QUESTION 12
An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?

A. set the Handshake Timeout to 30 seconds
B. set the Renegotiate Max Record Delay to 30
C. set the Renegotiate Period to 30 seconds
D. enable Require Peer SN1 Support

Answer: C

NEW QUESTION 13
An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?

A. Standard
B. Performance (HTTP)
C. Performance (Layer 4)
D. Stateless

Answer: C

NEW QUESTION 14
RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:
Read only access to the configuration Utility
Access to TMOS shell
Which two items need to be configured in this situation? (Choose two)

A. Console access is Advanced Shell
B. Default remote user role is Manager
C. Default remote user role is Operator
D. Console access is Read Only
E. Default remote user role is Guest
F. In Console access is TMSH

Answer: F

NEW QUESTION 15
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?

A. The HA network is using multicast IP.
B. The HA network is not configured for mirroring.
C. The HA network latency is too high.
D. The HA network is using the default routing domain.

Answer: A

Explanation:

NEW QUESTION 16
Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?

A. Unavailable (Disabled)
B. Offline (Disabled)
C. Unknown (Enabled)
D. Available (Enabled)

Answer: D

NEW QUESTION 17
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?

A. iRule
B. Gateway pool
C. Gateway Fail Safe
D. Gateway pool monitor

Answer: C

NEW QUESTION 18
Exhibit.

- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)

B)

C)

D)

A. Option C
B. Option A
C. Option B
D. Option D

Answer: B

NEW QUESTION 19
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?

A. Least Connections
B. Ratio
C. Least Sessions
D. Predictive

Answer: D

NEW QUESTION 20
An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web application. The security department has informed the LTM Specialist that the following cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?

A. Rewrite profile
B. Server SSL
CB. Client SSL
C. SPDY profile

Answer: B

Explanation:
Require SSL and flow F5 to server, server ssl

NEW QUESTION 21
Refer to the exhibit.

The http monitor is applied to a pool. All members are enabled. One server responds as follows.

What is the resulting status of this poo! member?

A. Unavailable (Disabled)
B. Available (Enabled)
C. Offline (Disabled)
D. Offline (Enabled)

Answer: D

Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).

NEW QUESTION 22
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?

A. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
B. TCP monitor, change transparent option to Yes, and sot the alias to port 80
C. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
D. TCP monitor, alias address 192.168.10.10. and set the alias to port 80

Answer: A

NEW QUESTION 23
An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?

A. Page Load Time
B. User Sessions
C. Max TPS and Throughout
D. Response Codes

Answer: A

NEW QUESTION 24
What should the LT'M Specialist add to the virtual server?

A. two Stream profiles and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)
B. one Stream profile and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)
C. one Stream profile with the expression of @http:// @https:// @
D. Two Stream profiles, one profile for each rewrite requirement

Answer: B

NEW QUESTION 25
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?

A. Ordered List
B. HA Group
C. Load Aware
D. HA Capacity

Answer: A

NEW QUESTION 26
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?

A. tmsh create sys ha-group External trunks add Externally
B. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
C. tmsh modify net van External failsafe enabled
D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))

Answer: B

NEW QUESTION 27
An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?

A. Move the BIG-IP Managers from TG1 to TG2
B. Modify the default traffic group of the Common partition to TG2
C. Restrict the Traffic Group Access of BIG-I Managers to TG2
D. Create a new partition and set the default traffic group to TG2

Answer: D

NEW QUESTION 28
AN LTM Specialist is deploying an iRule designed to determine the country of origin of an incoming client connection. The iRule needs to be used with an SSL-enabled web application.
Which profile required for the iRule to function properly?

A. UDP
B. TCP
C. DNS
D. HTTP

Answer: B

Explanation:
Question stem requires the client IP to match the source region, so TCP ?UDP at the transport layer can meet the requirements. The title stem mentions that it is a Web application based on SSL, and it does not mention F5 undertakes SSL offload, So TCP is enough.

NEW QUESTION 29
......

How to book the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Register or log in on F5 Network website, or visit the Candidate Portal, or contact F5 Certification for more information.

Exam Topics of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

The following will be discussed in this section:

Determine use cases for disabling a member
Discuss scenarios in which restoring a UCS archive is appropriate
Manage software images
Create and restore a UCS archive under the appropriate circumstances
Establish the frequency of a given issue (random, continuous, isolated, intermittent, repetitive intervals)
Given a description of an application, identify the correct virtual server configured for it (HTTP/HTTPS, TCP/UDP, VLANsenabled, route-domain)
Articulate the characteristics of a pool member that has been disabled or forced offline (Such as for new connections, persisted connections, etc.)
Given a situation where a virtual server configuration change did not appear to immediately take effect, determine why
Identify which modules are licensed and/or provisioned U/A
Understand the processes of licensing, license reactivation, and license modification (add-ons)
Given a situation where a pool member has been disabled but still appears to be receiving traffic, determine the cause
Understand how to get performance statistics in addition to the those shown in the dashboard (Overview - Performance)
Given an HA pair, describe the appropriate strategy for deploying a new software image
Distinguish between disabling a member and forcing it down
Recognize when a packet capture is needed within the context of a performance issue
Differentiate between performance issue types (i.e. Latency, Congestion, broken content)
Discuss the tasks involved in successfully restoring a UCS archive
Explain how to create a user U/A
Use BIG-IP tools in order to identify potential performance issues
Identify which high-level tasks can be automated using BIG-IQ
Explain how to modify user properties
Given a proposed virtual server configuration change, outline the scope of the change and for which connections those changes will affect (active connections, new connections, persisted sessions)
Given a scenario, discuss when it is appropriate to create a UCS archive
Determine use cases for forcing down a member