Tested & Approved H20-923_V1.0 Study Materials Download Free Updated 62 Questions
Regular Free Updates H20-923_V1.0 Dumps Real Exam Questions Test Engine
NEW QUESTION # 29
Which strategy most directly improves data center energy performance without compromising reliability when properly engineered and monitored?
- A. Use higher allowable supply air temperature with containment and adaptive control to reduce compressor and fan energy
- B. Oversize all cooling and power equipment permanently to avoid future upgrades
- C. Operate all redundant systems at full load simultaneously to maximize utilization
- D. Disable alarms to reduce nuisance notifications and operator workload
Answer: A
Explanation:
Huawei green data center concepts focus on reducing energy consumption through engineering controls rather than sacrificing resilience. Raising the allowable supply air temperature is a proven efficiency lever because it reduces compressor workload, expands economization opportunities where applicable, and can reduce fan energy when airflow is optimized. However, it must be implemented with airflow management-especially hot/cold aisle containment-to ensure server inlet temperatures remain within safe limits. Adaptive control is critical: monitoring rack inlet temperatures, cooling unit performance, and environmental conditions allows the system to dynamically adjust cooling output, fan speed, and setpoints to match real IT load. This avoids the common inefficiency of "overcooling for safety." When combined with standardized O&M procedures, alarm thresholds, and continuous trend analysis, the strategy improves overall energy performance while preserving reliability and service continuity. In contrast, permanent oversizing or forcing all redundant systems to run fully loaded wastes energy and can reduce operating efficiency. Properly engineered, monitored optimization delivers efficiency gains with controlled operational risk.
NEW QUESTION # 30
After the unit is powered on for the first time, it enters the compressor preheating state. To quickly perform power-on commissioning, you can manually shut down the compressor preheating.
- A. True
- B. False
Answer: B
Explanation:
Compressor preheating is a protection mechanism used during first power-on (and after long power-off periods) to improve compressor reliability before allowing refrigeration startup. The preheating function warms the compressor oil and reduces refrigerant migration and oil dilution, which otherwise can lead to liquid refrigerant in the compressor crankcase. If the compressor starts when oil is diluted or when liquid refrigerant is present, it increases the risk of abnormal noise, poor lubrication, high mechanical stress, and even liquid strike, which can damage the compressor and shorten service life. For data center cooling equipment, where continuous reliability is essential, the commissioning logic treats preheating as a required prerequisite for safe compressor operation. Therefore, O&M practice does not recommend bypassing or manually shutting down compressor preheating just to accelerate commissioning. The correct approach is to keep the unit energized and allow the preheating period to complete, then proceed with commissioning steps (fans, cooling system tests, alarms, and control verification) under proper protection conditions.
NEW QUESTION # 31
Which of the following are main components of Huawei indirect evaporative cooling system?
- A. Air filter
- B. Fan
- C. Compressor
- D. Water pump
- E. Heat exchanger
- F. Spray system
Answer: A,B,D,E,F
Explanation:
Huawei's indirect evaporative cooling system is designed to use theoutdoor air as a "free" cold sourcewhile keeping the data hall supply air isolated from outdoor contaminants and moisture. Its core is theheat exchanger, where heat from the indoor (return) air side is transferred to the outdoor working air side without mixing the two air streams. To enhance heat removal on the outdoor side, aspray systemwets the evaporation media or spray section, and awater pumpcirculates water to maintain uniform wetting and stable evaporation performance.Fansdrive airflow through the indoor and outdoor paths to ensure sufficient heat transfer and maintain the required air volume and pressure. Because outdoor air is involved on the working-air side,air filtersare required to reduce dust and protect the heat exchanger and internal airflow channels, improving reliability and reducing maintenance. Acompressoris not a main component of indirect evaporative cooling because the system primarily relies on evaporation and heat exchange rather than mechanical refrigeration.
NEW QUESTION # 32
Which of the following models is a Huawei in-room chilled water horizontal air supply product?
- A. NetCol8000-C070D
- B. FusionCol5000-A050H
- C. NetCol5000-A070U
- D. FusionCol8000-C210H
Answer: B
Explanation:
Huawei room-level air conditioning products are commonly identified by the series name plus a model suffix that indicates the cooling medium and airflow form factor. Anin-room chilled waterunit uses a chilled-water coil as the primary heat-exchange component and relies on the building's chilled-water system (chiller/plant) rather than an onboard refrigeration compressor for cooling generation. "Horizontal air supply" describes the discharge direction: the unit supplies conditioned air laterally into the room or into a specific airflow organization (such as cold-aisle delivery), supporting predictable airflow paths and stable return air conditions. Within the provided options,FusionCol5000-A050His the model that matches both identifiers: it belongs to Huawei's room cooling product line and the model code indicates an in-room configuration withchilled-watercapability andhorizontalair supply orientation. The other options belong to different series or represent configurations typically associated with other deployment forms (such as different placement, airflow direction, or system architecture). Therefore, the correct selection isFusionCol5000-A050H.
NEW QUESTION # 33
Operators can view parameters and set parameters on the "User Settings" and "Comm Settings" menus.
- A. False
- B. True
Answer: B
Explanation:
On Huawei data center cooling/monitoring controllers, menu permissions are typically organized so that routine O&M staff (operator role) can perform day-to-day adjustments that are required for normal running and integration, without accessing factory-only commissioning items. TheUser Settingsmenu is designed for operational configuration such as target temperature/humidity setpoints, control preferences, and other user- level parameters that need to be tuned to match the data hall environment and load changes. TheComm Settingsmenu is intended for communication configuration used in site integration, such as setting communication addresses, baud rates, protocol-related parameters, or enabling interfaces needed for upper- layer systems (for example, monitoring platforms). These settings are considered part of normal operation management and must be accessible so operators can maintain monitoring connectivity, replace controllers, or restore communication after changes. Higher-risk parameters (for example, factory calibration, protected control logic, or deep commissioning values) are normally restricted to higher privilege roles, but viewing and setting parameters withinUser SettingsandComm Settingsis an operator-allowed function.
NEW QUESTION # 34
ECO mode is not recommended when the load is less than
- A. 10%
- B. 5%
- C. 20%
- D. 30%
Answer: C
Explanation:
ECO mode is designed to improve UPS efficiency by supplying the load mainly through the static bypass path when the mains is within the acceptable quality window, while keeping the inverter synchronized and ready to take over quickly if power quality degrades. However, when the load istoo light, the overall operating characteristics of the UPS system are less favorable for ECO operation. At low load levels, the benefits of ECO in reducing conversion losses are smaller, and the system becomes more sensitive to frequent transfers caused by minor mains fluctuations, which can increase transfer##and operational risk. In addition, very light loads can reduce the effectiveness of system self-check behaviors and may lead to less stable operating margins for parallel systems, power modules, and downstream distribution, depending on site conditions.
Therefore, Huawei O&M guidance sets a practical threshold and states thatECO mode is not recommended when the load is lower than 20%, helping ensure stable operation, fewer unnecessary transfers, and better overall power supply reliability for critical loads.
NEW QUESTION # 35
During wizard startup, when you enter the screen for selecting commissioning items for the first time, all items are selected by default. Which item is mandatory. You can deselect other commissioning items that are not mandatory.
- A. Commissioning the condensate pump
- B. Commissioning the indoor fans
- C. Commissioning the humidifier
- D. Commissioning the cooling system
Answer: D
Explanation:
In Huawei precision cooling commissioning, the wizard groups functional commissioning items so technicians can validate key subsystems efficiently. Thecooling system commissioningis mandatory because it verifies the primary control and protection loop that directly determines whether the unit can safely provide cooling capacity. This includes confirming the refrigeration or chilled-water cooling path can start and stop correctly, sensors and control logic are valid, and protection conditions (such as abnormal pressures
/temperatures, flow conditions, or interlocks) behave as expected. Without completing cooling-system commissioning, the unit's core purpose-stable temperature control for IT loads-cannot be assured, and the controller cannot reliably judge normal versus fault states during operation.
Other items (indoor fans, condensate pump, humidifier) are important butscenario-dependent: some sites do not use humidification, some drainage designs do not require an internal condensate pump, and fan checks can be handled as part of broader functional tests or may vary by redundancy configuration. Therefore, the wizard allows non-mandatory items to be deselected, but the cooling system commissioning must remain selected to complete a valid baseline commissioning workflow.
NEW QUESTION # 36
Which of the following statements are true about the industry trend of the data center cooling systems?
- A. Cloud + AI - data centers enter a new energy-saving era.
- B. Evaporative cooling systems become the main solution for large data centers.
- C. Liquid cooling systems are widely used in high-density solutions.
- D. Higher inlet and outlet water temperatures are the trend of large data center cooling.
Answer: A,C,D
Explanation:
As data center power density increases (especially driven by AI and high-performance computing), the industry trend is to adoptliquid coolingin high-density scenarios because liquid has much higher heat transfer capability than air, enabling stable cooling where rack power is very high. This makes statementAtrue. The combination ofCloud + AIpushes operators to reduce PUE and total energy cost through more intelligent control, higher efficiency cooling architectures, and integrated energy management, so statementBis also true.
For large data centers, another clear trend is increasingchilled-water supply/return temperatures(higher inlet and outlet temperatures). Warmer water improves chiller efficiency, expands the number of hours that free cooling can be used, and reduces compressor work, soDis true. However,evaporative coolingis not universally the "main solution" for large data centers because it is climate- and water-condition dependent and is typically deployed as one option among multiple architectures rather than the dominant default everywhere. Therefore, Cis the incorrect statement.
NEW QUESTION # 37
When a critical alarm is generated in a lithium battery cabinet and the buzzer beeps continuously, the status of the indicator on the MDU is
- A. Steady red
- B. Blinking yellow fast
- C. Blinking red fast
- D. Steady yellow
Answer: C
Explanation:
In Huawei lithium battery cabinet alarm design, the MDU indicator and buzzer are coordinated to help O&M personnel immediately judge alarm severity without logging into a management system. Acritical alarmindicates that the battery system may no longer be in a fully safe or supported operating state and requires urgent handling, such as load protection actions, isolation, or immediate inspection. For this highest severity level, the cabinet uses the most prominent visual pattern:red with fast blinking, paired with acontinuous buzzer, to ensure the condition cannot be overlooked in an equipment room environment. Yellow indicators are reserved for lower severities such as warnings or minor/major alarms, where the system remains controllable and the required response can be scheduled. A steady red is typically used to indicate a persistent fault state or stop condition, whereasfast blinking red + continuous buzzeris the clear "critical, urgent" combination that triggers immediate on-site response and rapid fault localization (such as checking protection events, contactor status, temperature/voltage exceptions, and isolation conditions).
NEW QUESTION # 38
Which of the following are the user roles of Power Partner?
- A. Startup engineer
- B. Project manager
- C. Inventory operations manager
- D. Service engineer
- E. Service manager of a rep office
- F. DOC
Answer: A,B,C,D,E,F
Explanation:
Power Partner is Huawei Digital Power's partner service platform used to support delivery, commissioning, maintenance, and service operations across the full lifecycle of a project. To match real project workflows, the platform defines multiple user roles that align with different responsibilities and permission scopes. AStartup engineerfocuses on commissioning activities such as obtaining startup authorization, performing initial configuration, and completing functional verification. AService engineerhandles routine maintenance, inspections, troubleshooting, part replacement guidance, and closure of service cases. AProject managercoordinates delivery milestones, resource planning, and overall service execution to ensure acceptance criteria are met. AnInventory operations managermanages materials/parts flow, tracking, and availability to support timely repair and maintenance. TheDOC (Delivery/Dispatch Operations Center)role supports centralized operations such as work order dispatching, progress supervision, and process compliance.
Aservice manager of a representative officetypically oversees regional service quality, governance, and authorization control, ensuring the right people have the right access and that services are delivered according to Huawei process requirements.
NEW QUESTION # 39
Through device management, you can view the information about
- A. Overview
- B. Signal
- C. Service period
- D. Alarm
Answer: A,B,C,D
Explanation:
In Huawei smart module management (such as on the ECC800-Pro/WebUI),Device Managementis used to centrally view and maintain managed objects (UPS, SmartLi, rPDU, sensors, air conditioners, etc.).
TheOverviewpage provides a consolidated snapshot of a device's operating status, key parameters, running mode, and basic identification information so engineers can quickly judge whether the device is healthy and online. TheAlarmview lists active and historical alarms related to the device, supporting rapid fault isolation and verification after recovery. TheSignalview shows monitoring points and I/O status (including analog values and digital inputs/outputs where applicable), which helps engineers confirm sensor wiring, linkage logic, and real-time state changes during commissioning and troubleshooting. TheService periodinformation is used for lifecycle and maintenance planning, such as tracking service time, maintenance intervals, or component life indicators where supported, enabling preventive maintenance and reducing unexpected downtime. Therefore, Device Management supports viewing all four categories.
NEW QUESTION # 40
If a component runtime overdue alarm is generated for an air conditioner, you can clear the device running time on the "Maint > Performance Maintenance" screen.
- A. False
- B. True
Answer: B
Explanation:
Huawei smart cooling/precision air-conditioning controllers manage preventive maintenance by trackingaccumulated runtimefor wear components such as indoor fans, compressors (where applicable), humidifiers, and pumps. When a component reaches its configured maintenance interval, the controller generates aruntime overdue alarmto remind O&M staff to inspect, service, or replace the component. After the required maintenance action is completed (for example, fan replacement, bearing inspection, cleaning, or pump servicing), the accumulated runtime record must becleared/resetso the next maintenance cycle can be measured correctly from zero. The controller provides this function under the maintenance feature set because it is part of lifecycle management and performance tracking rather than an alarm acknowledgement. The navigation pathMaint > Performance Maintenanceis used to access runtime statistics and to clear the corresponding device/component running time after maintenance. This avoids repeated overdue alarms for a component that has already been serviced and ensures future alarms accurately reflect the operating hours of the newly serviced or replaced parts, improving reliability and maintenance planning accuracy.
NEW QUESTION # 41
Which of the following statements is false about the advantages of the free cooling solution for data centers?
- A. The current technology is not mature enough and should be used with caution.
- B. Directly uses the cooling capacity of the outdoor cooling source, resulting in ultra-low energy consumption.
- C. Makes full use of the seasonal temperature difference of air and water sources.
- D. Has many use cases in the industry.
Answer: A
Explanation:
Free cooling is a mainstream energy-saving concept in data center cooling design, used to reduce chiller compressor runtime by leveraging low outdoor temperatures (air-side) or low cooling-water temperatures (water-side) during suitable seasons. Therefore, describing the technology as "not mature enough and should be used with caution" is the false statement when discussing its advantages. In practice, free cooling has broad industry adoption and is considered a proven approach when applied with correct engineering, such as proper filtration, anti-condensation control, heat exchanger selection, and automatic control strategies. Its advantage is that it can directly utilize the outdoor "cold source" to remove heat, which significantly reduces cooling power consumption compared with full mechanical refrigeration, improving overall energy efficiency and supporting lower PUE targets. It also makes full use of seasonal and day-night temperature differences: the system dynamically switches among free cooling, partial free cooling, and mechanical cooling to balance reliability and efficiency. The key point is maturity: the benefit of free cooling comes from well-established principles and widely implemented architectures, not experimental technology.
NEW QUESTION # 42
When the outdoor unit is installed at a position higher than the indoor unit, install an oil trap every five to six meters in the vertical direction along the gas pipe to ensure system reliability.
- A. False
- B. True
Answer: B
Explanation:
This statement is true. In split DX/precision cooling refrigerant systems, the "gas pipe" typically refers to thesuction linereturning refrigerant vapor (and entrained compressor oil) from the indoor evaporator to the outdoor unit/compressor. When theoutdoor unit is higher than the indoor unit, the suction line includes avertical riser. Oil naturally tends to settle and flow downward under gravity, so without proper piping measures, oil may accumulate in low points or fail to be carried upward consistently, leading topoor oil return.
Insufficient oil return can cause compressor lubrication issues, abnormal noise, overheating, reduced efficiency, and long-term reliability risks. Installingoil trapsat the bottom of the riser and thenevery 5-6 metersof vertical lift helps collect oil and allows it to be periodically swept upward by refrigerant velocity, maintaining stable oil circulation. This requirement is especially important in data center cooling because continuous operation and high availability demand reliable compressor lubrication and stable refrigerant flow under varying load conditions.
NEW QUESTION # 43
The rated output capability of a single power module for the UPS5000-H is how many kVA.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Huawei UPS5000-H is a modular UPS platform built by paralleling standardized power modules inside the power cabinet to form different system capacities. In this architecture, the "single power module" is the basic building block that contributes a fixed rated apparent power to the total UPS capacity. For the UPS5000-H series, each power module is rated at100 kVA, and the system capacity is achieved by installing multiple 100 kVA modules and configuring redundancy (such as N+1). This modular approach improves availability and O&M efficiency because a failed module can be isolated and replaced without shutting down the entire UPS, while the remaining modules continue carrying the load within their capacity limits. Using 100 kVA as the module rating also simplifies planning: technicians can quickly estimate remaining headroom by counting active modules and comparing total available kVA/kW against the real-time load, ensuring the UPS stays within recommended loading and redundancy margins during maintenance or fault conditions.
NEW QUESTION # 44
When a critical alarm is generated for the unit, the indicator on the LCD controller turns red and the buzzer beeps continuously.
- A. False
- B. True
Answer: B
Explanation:
In Huawei data center facility equipment (such as precision cooling units and related controllers), alarm presentation follows a clear severity-based design so technicians can recognize urgency immediately without entering detailed menus. Acritical alarmrepresents the highest severity level and is treated as a condition that may impact safe operation, cooling continuity, or equipment protection. For this reason, the LCD controller uses the most prominent visual and audible indications: theindicator turns redto show critical severity, and thebuzzer sounds continuouslyto ensure the alarm cannot be overlooked in a noisy equipment-room environment. This behavior supports rapid response: O&M personnel can quickly identify that immediate action is required, then open the alarm list to locate the root cause, confirm whether the unit has derated or stopped, and execute the prescribed troubleshooting steps (for example, checking power status, sensor readings, fan/compressor status, water flow/pressure, and protection interlocks). Therefore, the statement correctly describes the standard critical-alarm indication method on the LCD controller.
NEW QUESTION # 45
After installing the FusionCol8000-C (110-440 kW), inject water to preserve the pressure for the chilled water pipes to how many MPa. After 30 minutes, check that no leakage occurs. Preserve the pressure for 24 hours. If the pressure drop is less than 0.01 MPa and no leakage occurs, the pipes do not leak.
- A. 1.2
- B. 0
- C. 0.8
- D. 0.5
Answer: C
Explanation:
For FusionCol8000-C chilled-water systems, Huawei commissioning requires awater leakage/pressure- holding teston the chilled-water piping after installation to verify joint sealing, valve interfaces, and connection integrity before long-term operation. The specified method is toraise the water pressure in the chilled-water pipe to 0.8 MPa, then observe for30 minutesto confirm there is no visible leakage. If the system remains dry, the same pressure isretained for 24 hoursas a stability verification step. The acceptance criterion is that thepressure drop is less than 0.01 MPaover the 24-hour period and no leakage is found, which demonstrates that the piping and fittings meet tightness requirements under the prescribed test pressure. This procedure helps prevent future failures such as slow seepage, corrosion around joints, insulation waterlogging, and unexpected shutdowns caused by water loss or low differential pressure alarms. It also ensures that subsequent flushing, venting, and operational commissioning can be performed safely and reliably.
NEW QUESTION # 46
......
Pass Huawei H20-923_V1.0 Exam in First Attempt Easily: https://www.guidetorrent.com/H20-923_V1.0-pdf-free-download.html
Practice Test Questions Verified Answers As Experienced in the Actual Test!: https://drive.google.com/open?id=1waHme9W_SKPAxYPzuNx5AmVSyQHXFXva