Study HIGH Quality D-VXR-DY-23 Free Study Guides and Exams Tutorials
Download EMC D-VXR-DY-23 Exam Dumps to Pass Exam Easily
NEW QUESTION # 57
Based on the exhibit, what is the correct IP address to use when resetting a G Series node with the reset script?
- A. 192.168.80.35
- B. 192.168.30.35
- C. 169.254.234.124
- D. 192.168.20.35
Answer: B
NEW QUESTION # 58
Which vSAN setting is enabled by default during the initial deployment of a VxRail cluster?
- A. Deduplication and Compression
- B. Storage policy of FTT = 1
- C. Encryption
- D. Performance Service
Answer: A
NEW QUESTION # 59
An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster.
How many VMs are licensed to be protected on the cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 60
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting.
What is the engineer likely planning to do?
- A. Temporary maintenance
- B. Shutdown of an entire cluster
- C. Permanent removal of host from cluster
- D. Extensive maintenance
Answer: A
NEW QUESTION # 61
What is the correct command to restart the Loudmouth process on a VxRail node?
- A. /etc/init.d/loudmouth restart
- B. systemctl restart vmware-loudmouth
- C. /sbin/service loudmouth restart
- D. /usr/lib/vmware-loudmouth/bin/loudmouthc restart
Answer: A
NEW QUESTION # 62
From what environment must a network administrator run VxRail network validation?
- A. Windows PowerShell command prompt
- B. VxRail Deployment Wizard
- C. Same subnet as VxRail Management Network
- D. Top of Rack switches
Answer: C
NEW QUESTION # 63
A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.
What is an expected benefit of programmatically gathering VxRail information?
- A. Perform pre-checks for vSAN health
- B. Obtain status of all running operations on a cluster
- C. Perform node shutdowns and specific operations
- D. Automate iDRAC firmware management and status
Answer: B
NEW QUESTION # 64
What is a Dell EMC converged platform product?
- A. Vscale Architecture
- B. Vblock/VxBlock
- C. VxRail
- D. VxRack
Answer: B
NEW QUESTION # 65
What is a consideration for using link aggregation on the Top of Rack (ToR) switch for a VxRail?
- A. Can be configured for any connectivity, but are not required
- B. Should not be used for VxRail node ports, but can be used for uplink and ISL
- C. Should always be configured for VxRail node ports to allow for failover
- D. Is not supported on the VxRail ToR switch
Answer: B
NEW QUESTION # 66
After a successful installation, where in VxRail Manager should you collect logs?
- A. CONFIG > General > Log Collection > Generate New Log Bundle
- B. CONFIG > System > System Diagnostics > Diagnose
- C. CONFIG > General > System Diagnostics > Generate New Log Bundle
- D. CONFIG > System > Log Collection > Diagnose
Answer: D
NEW QUESTION # 67
Which requirement is optional for a VxRail Stretched Cluster?
- A. Cross-site layer-2 connectivity
- B. External vCenter
- C. IPv6 Multicast between locations
- D. Enterprise Plus vSphere Licensing
Answer: C
NEW QUESTION # 68
You have determined that you need to execute a RASR factory upgrade of a VxRail v4.7.1xx node You download the RASR ISO from the Dell Support site.
What is the correct order of steps to finish the upgrade?
Answer:
Explanation:
NEW QUESTION # 69
You are in the validation phase of a VxRail deployment with two Top of Rack (ToR) switches and four V570F VxRail nodes.
Which command should you issue on each of the ToR switches to validate that Link Aggregation has not been configured for VxRail interfaces?
- A. show spanning tree
- B. show running config mld
- C. show interfaces port-channel brief
- D. show vlan
Answer: C
NEW QUESTION # 70
Which VxRail models support the installation of rack rails with a cable management arm?
- A. D, G, P, and S Series
- B. D, E, S, and V Series
- C. E, P, S, and V Series
- D. E, G, P, and S Series
Answer: C
NEW QUESTION # 71
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local. Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 72
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard.
What actions must be taken to retrieve the JSON file?
- A. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data Sent Use the Download option
- B. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directory GET the config-initial json file
- C. SSH to the VxRail Manager VM with the mystic user SU to root Go to the /opt/VxRail/config directory SCP the initial-config json file to a local location
- D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > System Use the Product Documentation option
Answer: A
NEW QUESTION # 73
The Market Place on a VxRail Manager is empty on a newly deployed system. Testing shows that the Internet is reachable through proxy in the management network.
Which action should be taken to correct this situation?
- A. Manually add the proxy information in the VxRail Manager configuration
- B. VxRail Manager has no proxy support.
- C. Upgrade to latest version and add proxy configuration manually.
- D. Reset the appliance and redeploy with proxy information filled in the deployment process.
Answer: A
NEW QUESTION # 74
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?
- A. RASR Factory Image Upgrade
- B. VxRail Node Imaging Management
- C. Compute node expansion
- D. Factory Reset
Answer: C
NEW QUESTION # 75
Match each VxRail configuration with its related characteristic.
Answer:
Explanation:
NEW QUESTION # 76
Which vCenter object is created automatically when deploying VxRail with an external vCenter Server?
- A. Cluster
- B. Resource Pool
- C. VxRail Management user account
- D. Datacenter
Answer: A
NEW QUESTION # 77
A 4-node VxRail Model E560F solution with an embedded vCenter and Log Insight is planned for deployment.
Prior to deployment, DNS records must be created for which hosts?
- A. vCenter Server, ESXi hosts, VxRail Manager, and iDRAC
- B. DNS records are automatically created during VxRail deployment
- C. vCenter Server, ESXi hosts, VxRail Manager, and Log Insight
- D. vCenter Server, first ESXi host, VxRail Manager, and iDRAC
Answer: C
NEW QUESTION # 78
Where is the VxRail Documentation Quick Reference List located?
- A. VxRail Configuration Portal
- B. Dell Technologies Support Page
- C. Dell Technologies Central
- D. Dell Technologies SolVe Online
Answer: B
NEW QUESTION # 79
......
Get 100% Real Free Storage Administrator D-VXR-DY-23 Sample Questions: https://www.guidetorrent.com/D-VXR-DY-23-pdf-free-download.html
Accurate D-VXR-DY-23 Questions with Free and Fast Updates: https://drive.google.com/open?id=14TsxYRGNmHYAIovfFzl9ONXJQtopbJzu