Share Latest Jul-2023 300-815Test Practice Test Questions, Exam Dumps
Positive Aspects of Valid Dumps 300-815 Exam Dumps!
To pass the Cisco 300-815 exam, candidates need to have a good understanding of Cisco collaboration solutions and the ability to implement advanced call control and mobility services in an enterprise environment. Candidates are also expected to have hands-on experience with Cisco solutions and be familiar with Cisco Unified Communications Manager, Cisco Unity Connection, and Cisco Jabber. The exam consists of 60-70 questions, and candidates have 90 minutes to complete it. Passing the exam requires a score of 825/1000 or higher. Upon passing the exam, candidates will have validated their skills in implementing advanced call control and mobility services in Cisco solutions and will be on their way to earning the CCNP Collaboration certification.
NEW QUESTION # 22
Refer to the exhibit.
How many maximum hops can an ILS update traverse?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 23
Drag and drop the steps from the left into the order to provision mobility users through LDAP on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 24
Refer to the exhibit.
An administrator has configured a SIP trunk between two Cisco UCM clusters. For calls that should use the trunk, the calls fail with a fast busy. The administrator checks the Cisco CallManager SDL traces and found that the cluster to which the calling device is registered never sends an INVITE to the destination cluster. The administrator also verifies that all nodes from both clusters are powered on, and the CallManager service is running. How is this issue resolved?
- A. The administrator needs to disable OPTIONS pings on the SIP trunks for both clusters.
- B. The administrator must allow connectivity so that TCP connections do not fail between the nodes.
- C. The administrator must associate the route pattern with a calling search space the device can dial.
- D. The administrator needs to enable OPTIONS pings on the SIP trunks for both clusters.
Answer: B
NEW QUESTION # 25
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C. Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- B. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- D. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
Answer: B,C
NEW QUESTION # 26
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. CTI route points
- B. device pools
- C. translation patterns
- D. IP phones
- E. CTI ports
Answer: D,E
NEW QUESTION # 27
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
- B. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- C. Accept Audio Codec Preferences in Received Offer must be set to On.
- D. Early Offer for G Clear Calls must be enabled.
Answer: A
NEW QUESTION # 28 
Refer to the exhibit. Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?
- A. rule 1 /^\([2-9]..[2-9]......$\)/ /\1/
- B. rule 1/^\+1\([2-9]..[2-9]......$\)/ /\1/
- C. rule 1 /^/+\([^1].*\)/ /011\1/
- D. rule 1 /^\+1\([2-9]..[2-9]......$\)/ /\0/
Answer: B
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference:
NEW QUESTION # 29
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- B. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- D. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
Answer: B,C
NEW QUESTION # 30
An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?
- A. Global Data Service Parameter Limit
- B. Imported Dial Plan Replication Database Object Lower Limit
- C. ILS Max Number of Learned Objects in Database
- D. ILS Active Learned Object Upper Limit
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1SU1/systemConfig/ cucm_b_system-configuration-guide-1251su1/cucm_b_system-configuration-guide-
1251su1_restructured_chapter_0100011.html#CUCM_TK_I7C708C2_00
NEW QUESTION # 31
Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?
- A. BLF Call Pickup
- B. Group Call Pickup
- C. Directed Call Pickup
- D. Other Group Pickup
Answer: D
Explanation:
Reference:
https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/ a07cpick.html#wp1022865
NEW QUESTION # 32
An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)
- A. Add the long-distance & international pattern's partitions to the calling search space of the device profile
- B. Remove the long-distance & international pattern's partitions from the calling search space of the device profile.
- C. Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.
- D. Add the long-distance & international pattern's partitions to the calling search space of the physical phone.
- E. Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.
Answer: A,C
NEW QUESTION # 33
An administrator sees the voice register pool 1 command in a Cisco UCME configuration. Which configuration is occurring in this section?
- A. configuration for SIP registrar service
- B. configuration for a single SIP phone
- C. configuration items common for all SIP phones
- D. configuration for a pool of SIP phones (similar to device pool on Cisco UCM)
Answer: B
NEW QUESTION # 34
Which description of RTP timestamps or sequence numbers is true?
- A. The sequence number is used to detect losses.
- B. The timestamp is used to place the incoming audio and video packets in the correct timing order (playout
- C. Sequence numbers increase by four for each RTP packet transmitted.
- D. Timestamps increase by the time "carrying" by a packet.
Answer: B
Explanation:
delay compensation).
NEW QUESTION # 35
Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)
- A. username and secret key
- B. TLS certificates
- C. passwords
- D. FQDN of the servers defined in DNS
- E. TokenID
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/ sysConfig/11_5_1_SU1/cucm_b_system-configuration-guide-1151su1/cucm_b_system-configuration-guide- 1151su1_chapter_011001.pdf
NEW QUESTION # 36
Which IOS command creates a SIP-enabled dial peer?
- A. dial-peer voice 20 pots
- B. dial-peer voice 20 voip
- C. voice dial-peer 20 sip
- D. dial peer voice 20 sip
Answer: B
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference: https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6
NEW QUESTION # 37
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port
5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)
- A. Incoming Port in SIP Information section of the SIP Trunk configuration.
- B. Incoming Port in SIP Trunk Security Profile configuration
- C. Destination Port in SIP Trunk Security Profile configuration
- D. Incoming Port in Security Information of the SIP Profile configuration.
- E. Destination Port in SIP Information section of the SIP Trunk configuration
Answer: B,E
NEW QUESTION # 38
Refer to the exhibit.
An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer's carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)
- A. Enable Early Offer on the Cisco Unified Border Element.
- B. Enable PRACK.
- C. Enable the supplementary-service media-renegotiate command.
- D. Enable Media Flow Around
- E. Enable Mid-Call Signaling Consumption.
Answer: A,B
NEW QUESTION # 39
Which two types of distribution algorithm are within a line group? (Choose two.)
- A. top down
- B. circular
- C. bottom up
- D. highest preference
- E. random
Answer: A,B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/ CUCM_BK_CDF59AFB_00_admin-guide-90/CUCM_BK_CDF59AFB_00_admin-guide_chapter_0100011.html
NEW QUESTION # 40
Refer to the exhibit.
Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user
+1613-555-1234 dials the number?
- A. calling number 011-1-613-555-1234 and numbering type "subscriber"
- B. calling number 011613-555-1234 and numbering type "international"
- C. calling number 613-555-1234 and numbering type "national"
- D. calling number 613-555-1234 and numbering type "subscriber"
Answer: C
NEW QUESTION # 41
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?
- A. 1XX (urgent Priority Set)
- B. 12!
- C. 12X (urgent priority set)
- D. 12[2-5]
Answer: D
NEW QUESTION # 42
Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button Which configuration parameter causes this problem?
- A. The voicemail pilot number is missing from the telephony service configuration on Cisco UCME
- B. The voicemail pilot number for call forwarding is missing from the ephone-dn
- C. The voicemail pilot number is missing from the call handling on Cisco Unity Express
- D. The voicemail pilot number for call forwarding is missing from the ephone
Answer: B
NEW QUESTION # 43
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)
- A. The phone button template must have the Queue Status Softkey configured.
- B. The maximum number of callers allowed in queue must be 10.
- C. A unicast music on hold audio source must be configured.
- D. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.
- E. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide- 1201_chapter_01001101.html#CUCM_RF_C960BC9A_00
NEW QUESTION # 44
A new deployment is using MVA for a specific user on the sales team, but the user is having issues when dialing DTMF. Which DTMF method must be configured in resolve the issue?
- A. in-band
- B. gateway
- C. out-of-band
- D. channel
Answer: C
NEW QUESTION # 45
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?
- A. o= line of SDP content
- B. c= line of SDP content
- C. Allow: header if the 200 OK response
- D. Contact: header of the 200 OK response
Answer: A
NEW QUESTION # 46
......
To prepare for the Cisco 300-815 exam, candidates can take advantage of various resources provided by Cisco. These include instructor-led training courses, self-paced e-learning modules, and practice exams. Additionally, candidates can gain hands-on experience by setting up and configuring Cisco UCM and Mobility features in a lab environment.
Practice LATEST 300-815 Exam Updated 120 Questions: https://www.guidetorrent.com/300-815-pdf-free-download.html
First Attempt Guaranteed Success in 300-815 Exam: https://drive.google.com/open?id=19WXzpoIzRLtlf48FMHLp5GjywGCn7TJq