Master 2026 Latest The Questions AVIXA Communications and Pass CTS-D Real Exam! Penetration testers simulate CTS-D exam PDF AVIXA CTS-D Exam Certification Details: Books / TrainingCandidate HandbookDuration180 minsExam NameAVIXA Certified Technology Specialist - Design (CTS-D)Exam CodeCTS-DNumber of Questions135Schedule ExamPearson VUEPassing Score350 / 500MemberExam Price$475(USD) AVIXA CTS-D - Design [...]

[Q81-Q103] Master 2026 Latest The Questions AVIXA Communications and Pass CTS-D Real Exam!

Share

Master 2026 Latest The Questions AVIXA Communications and Pass CTS-D Real Exam!

Penetration testers simulate CTS-D exam PDF


AVIXA CTS-D Exam Certification Details:

Books / TrainingCandidate Handbook
Duration180 mins
Exam NameAVIXA Certified Technology Specialist - Design (CTS-D)
Exam CodeCTS-D
Number of Questions135
Schedule ExamPearson VUE
Passing Score350 / 500
MemberExam Price$475(USD)


AVIXA CTS-D - Design Exam Syllabus Topics:

TopicWeight
Duty A: Conducting a Needs Assessment16.8%
Task 1: Identify Decision-makers and Stakeholders1.6%
Task 2: Identify Skill Level of End Users2.4%
Task 3: Educate AV Clients1.6%
Task 4: Review Client Technology Master Plan3.2%
Task 5: Identify Client Expectations4%
Task 6: Identify Scope of Work4%
Duty B:Coordinating with Other Professionals to Develop Project Documentation23.2%
Task 1: Review A/E (architectural and engineering) drawings4%
Task 2: Coordinate with architectural/interior design professionals4%
Task 3: Coordinate with Mechanical Professionals1.6%
Task 4: Coordinate with Structural Professionals1.6%
Task 5: Coordinate with Electrical Professionals3.2%
Task 6: Coordinate with lighting professionals2.4%
Task 7: Coordinate with IT and network security professionals4.0%
Task 8: Coordinate with acoustical professionals1.6%
Task 9: Coordinate with life safety and security professionals0.8%
Duty C: Developing AV Designs48%
Task 1: Create Draft AV Design10.4%
Task 2: Confirm site conditions8%
Task 3: Produce AV infrastructure drawings12%
Task 4: Produce AV system drawings12%
Task 5: Finalize Project Documentation5.6%
Duty D:Conducting Project Implementation Activities12%

 

NEW QUESTION # 81
Which of the following best describes a "touch panel" in AV systems?

  • A. A microphone type
  • B. An audio mixer
  • C. A cable type
  • D. A display device for users to control AV systems interactively

Answer: D


NEW QUESTION # 82
What does the term "fire rating" refer to in AV system materials?

  • A. Resistance to heat and flame spread
  • B. Electrical conductivity
  • C. Resistance to water damage
  • D. Durability under mechanical stress

Answer: A


NEW QUESTION # 83
A client's security objectives can often be described with respect to the CIA triad. CIA stands for:
Response:

  • A. Communication, infrastructure, authorization
  • B. Confidentiality, integrity, availability
  • C. Central Intelligence Agency
  • D. Confidentiality, information, access

Answer: B


NEW QUESTION # 84
Which of the following amplifiers would you specify for a 30 ft x 40 ft conference room with a 10 ftceiling. The requirements are to provide a system with two front speakers, and two zones of ceiling speakers?

Response:

  • A. 4 Channel 300 W/Ch @ 8 Ohm
  • B. 4 Channel 100W/Ch @ 4 Ohm
  • C. 4 Channel 300 W/ch @ 70V or 4 Ohm
  • D. 2 Channel 300 W/Ch @ 70V or 8 Ohm

Answer: C


NEW QUESTION # 85
You currently have the bandwidth capacity to stream 30 channels of 48 kHz, 24-bit audio. How many channels could you stream if you upgraded to 96 kHz, 24-bit audio?
Response:

  • A. 25 channels
  • B. 60 channels
  • C. 30 channels
  • D. 15 channels

Answer: D


NEW QUESTION # 86
What type of design information is found on TELCO/DATA (IT) coordination drawings?
Response:

  • A. Locations of conduit runs, mixers, signal compressors
  • B. Locations of server, phone and Ethernet lines, WiFi access points
  • C. Breaker boxes, lighting, signal runs
  • D. Drains, water lines, intake valves, security system

Answer: B


NEW QUESTION # 87
When producing shop drawings such as AV signal flow diagrams, what should be included?
Response:

  • A. Vendor details and specifications
  • B. Descriptions of the video feed settings and relays
  • C. Details about the building infrastructure and electrical system
  • D. Details of equipment configuration and interconnections

Answer: D


NEW QUESTION # 88
In an AV system, what is the purpose of a DSP (Digital Signal Processor)?

  • A. To manage and manipulate audio or video signals for optimal performance
  • B. To amplify signals
  • C. To provide power to devices
  • D. To convert analog signals to digital

Answer: A


NEW QUESTION # 89
Twisted-pair cables offer protection from electromagnetic interference by __________.
Response:

  • A. Physically separating conductors from higher-voltage signals
  • B. Exposing each wire to the same outside interference, allowing it to be canceled at the input circuit
  • C. Comparing the signal that arrives at the destination device against a checksum
  • D. Shielding each pair inside a foil or braided shield

Answer: B


NEW QUESTION # 90
Which type of microphone is most appropriate for capturing audio from a single speaker in a large room?

  • A. Boundary microphone
  • B. Cardioid
  • C. Omnidirectional
  • D. Lavalier

Answer: B


NEW QUESTION # 91
For a flat-floor auditorium with rows of staggered seats, evenly spaced for proper horizontal viewing, which row or rows will determine the preferred minimum height of the bottom of the image on a display at the front of the room?
[Collaborating With Other Professionals/Coordinate architectural/interior design criteria] Response:

  • A. Rear three rows of the room
  • B. Second row from the back of the room
  • C. Ends of the back row of the room
  • D. First three front rows of the room

Answer: A


NEW QUESTION # 92
What is the role of an AV integrator?

  • A. Installing, configuring, and programming AV systems to meet design specifications
  • B. Manufacturing AV equipment
  • C. Designing network infrastructure only
  • D. Providing only user training

Answer: A


NEW QUESTION # 93
What is the main advantage of using fiber optic cables for AV signal transmission?

  • A. Easier termination
  • B. Lower cost
  • C. High bandwidth and immunity to electromagnetic interference
  • D. Smaller connectors

Answer: C


NEW QUESTION # 94
Which document typically includes system block diagrams and detailed design drawings?

  • A. System design package
  • B. Installation manual
  • C. Project charter
  • D. User guide

Answer: A


NEW QUESTION # 95
The main considerations when selecting a cable shield are:
Response:

  • A. Cable types, gauge, and interference
  • B. Impedance, flexibility, and materials
  • C. Coverage, flexibility, and frequency range
  • D. Materials, permeability, and conductors

Answer: C


NEW QUESTION # 96
Which of the following cable types is best suited for carrying balanced audio signals?

  • A. USB
  • B. HDMI
  • C. RCA
  • D. XLR

Answer: D


NEW QUESTION # 97
Which type of signal transmission is least susceptible to electromagnetic interference?

  • A. Digital video over fiber optic cable
  • B. Analog audio over unshielded cable
  • C. Analog video over coaxial cable
  • D. Balanced audio over shielded cable

Answer: A


NEW QUESTION # 98
In AV design, what is the purpose of "equalization" (EQ)?

  • A. To adjust the frequency response of an audio signal
  • B. To control lighting
  • C. To route video signals
  • D. To increase signal power

Answer: A


NEW QUESTION # 99
When considering viewers' visual field along a horizontal plane, people can recognize words, fine details, and color at what angle from the standard line of sight?
Response:

  • A. 25 to 30 degrees
  • B. 0 to 10 degrees
  • C. 40 to 50 degrees
  • D. 10 to 20 degrees

Answer: D


NEW QUESTION # 100
When lighting a room for videoconferencing, the Illuminating Engineering Society recommends that fluorescent light sources have a correlated color temperature of __________.
Response:

  • A. 2000 to 2500 K
  • B. 5000 to 5500 K
  • C. 3000 to 3500 K
  • D. 4000 to 4500 K

Answer: C


NEW QUESTION # 101
Which is a typical function of an AV control processor?

  • A. Routing audio signals
  • B. Centralized control and automation of AV devices
  • C. Powering displays
  • D. Amplifying audio signals

Answer: B


NEW QUESTION # 102
Which of the following is a benefit of using digital AV signals over analog?

  • A. Susceptibility to interference
  • B. Lower bandwidth requirements
  • C. Easier to amplify without distortion
  • D. Higher signal degradation over distance

Answer: C


NEW QUESTION # 103
......

Penetration testers simulate CTS-D exam: https://www.guidetorrent.com/CTS-D-pdf-free-download.html

Bestselling On-The-Job Reference Exam Questions: https://drive.google.com/open?id=1cJSAwnZr-WDhlB0rSl93z-Cv0NxZiS_a