Excellent MB-335 PDF Dumps With 100% GuideTorrent Exam Passing Guaranted [May-2025]
100% Pass Your MB-335 Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert at First Attempt with GuideTorrent
NEW QUESTION # 71
You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.
You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.
You need to set up this item as a full visibility catch weight item.
Which two steps must you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create an inter-class unit of measure conversion between boxes and carats.
- B. Assign it a Serial number group with per qty. defined as 1.
- C. Assign a Tracking dimension group with batch number as the only active tracking dimension.
- D. Assign the item a Tracking dimension group with active serial number control
Answer: A,D
Explanation:
* A catch weight item is an item that is sold by one unit of measure but is managed in inventory by a different unit of measure1. For example, diamonds are sold by boxes but weighed by carats. A full visibility catch weight item is a catch weight item that requires the weight of each individual container to be tracked2. For example, each box of diamonds must have its own weight recorded.
* To set up a catch weight item for diamonds, you must do the following steps2:
* Assign the item a Tracking dimension group with active serial number control. This enables the item to be tracked by serial numbers, which represent the individual containers of the item.
Each serial number will have its own weight associated with it.
* Assign the item a Serial number group with per qty. defined as 1. This ensures that each container of the item has a unique serial number and that only one container can be assigned to a serial number.
* Create an inter-class unit of measure conversion between boxes and carats. This defines the
* relationship between the sales unit and the inventory unit of the item. The conversion factor can be based on a nominal weight or an average weight of the containers.
NEW QUESTION # 72
A company is implementing Dynamics 365 Supply Chain Management The company is a subcontractor that produces subassemblies for two major customers. CustomerA and Customers The company prioritizes CustomerA production orders to start on Mondays. The production orders may take several days to complete. Customers' orders are produced throughout the week, after CustomerA orders are completed. Work in process (W1P) must be calculated and consolidated for CustomerA and CustomerB respectively on the financial reports.
You need to configure the production requirements.
What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 73
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.
For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.
You need to create and configure the product and pricing for the new speaker.
Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs.
Docs the solution meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
The solution meets the goal. Here is the explanation:
To create and configure the product and pricing for the new speaker, you should use the following steps1:
Create a product master for the speaker and release it to the relevant legal entities. On the Product dimension groups page, select Constraint-based configuration as the configuration technology, and select the configuration dimension. On the Released product details page, select Configurable on the Engineer tab.
Create a constraint-based product configuration model for the speaker and add it as a version to the product master. On the Constraint-based product configuration model details page, add attributes, constraints, subcomponents, BOM lines, and route operations to define the features and structure of the speaker. For example, you can add an attribute for carbon fiber options and specify Standard and Premium as the values. You can also add constraints to limit the combinations of attribute values that are allowed.
Create a price model for the speaker and link it to the product configuration model. On the Price models page, add price components and specify how they are calculated based on attributes, subcomponents, BOM lines, or route operations. For example, you can add a price component for carbon fiber options and specify different prices for Standard and Premium values. You can also add price components for other attributes that affect the price of the speaker.
Configure products on sales orders, sales quotations, purchase orders, or production orders by using the Product configuration models page. You can select values for attributes and see how they affect the price of the speaker. You can also view the price details and see how each price component contributes to the total price.
1: Product configuration overview : Create constraint-based configuration : Price models
NEW QUESTION # 74
A company produces homeopathic lotions (or pain relief and uses Dynamics 365 Supply Chain Management.
Several components used in the production of the pain-relieving lotion and oils have special government-mandated reporting requirements.
You need to ensure the company can provide the appropriate reporting and tracking for these components.
Which parameters should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 75
You are the lead product design engineer at a plastics manufacturing company.
You implement a new process that uses a single to produce three finished at the same time.
You need to set up the planning items number and formula to correctly to manufacturing the tree items.
Which three actions should you perform? Each correct answer presents part of the solution.
- A. Add minimum and maximum quantities on formula.
- B. Create item number for planning item and the associated formula.
- C. Assign co-production to the formula.
- D. Add a coverage group to the formula.
- E. Specify each of the finished good items as co-products.
Answer: B,C,E
NEW QUESTION # 76
A bicycle manufacturing company is implementing Dynamics 365 Supply Chain Management.
The warehouse must pick and stage parts other than paint for bicycle assembly. Paint is at the production station.
You need to configure the reservations for production.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
To configure the reservations for production, you should do the following:
* Define configuration for paint reservation: You should configure the Item model group for paint. The Item model group determines the inventory policies for an item, such as reservation, tracking, and costing1. You can set the reservation policy for paint to FIFO date-controlled, which means that the inventory reservation is controlled by a sorting date according to the FIFO principle2. You can also set the Backward from ship date option, which means that the inventory reservation is controlled by the last update physical date according to the FIFO rule2.
* Define the reservation principle for paint: You should set the reservation principle to Start. This means that inventory is reserved when production starts3. This way, you can ensure that paint is available at the production station when needed
NEW QUESTION # 77
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
* Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.
* Create a vendor resource then create a work cell for outsourced painting and add the resource to the work cell.
* Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.
* Create a server term to tie the purchase agreement to the activity.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
The solution does not meet the goal. Here is the explanation:
* To create a subcontracting activity for the painting service, you should use the following steps1:
* Create a vendor warehouse for the subcontracting vendor. This step is missing in the solution, but it is required to track the inventory that is located at the vendor's site. You need to create a warehouse that is assigned to the vendor account and set it as vendor-managed1.
* Create a vendor resource and add it to a new work cell for outsource painting. This step is correct, because you need to create a resource that is assigned to the vendor account and add it to a resource group that represents the subcontracting work cell1. This way, you can assign the subcontracting activity to the vendor resource.
* Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity. This step is incorrect, because you need to add the service item (SP-
01) as the product of the process activity, not the component to be painted1. The service item represents the subcontracting service that is provided by the vendor. You also need to select the Generate license plate option on the mobile device menu item that is used for reporting as finished1.
* Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service. This step is correct, because you need to create a purchase agreement that defines the terms and conditions for purchasing the subcontracting service from the vendor1. You also need to add a purchase agreement line for SP-01 and specify the quantity and price of the service.
* Create a server term to tie the purchase agreement to the activity. This step is incorrect, because you need to create a service term that links the purchase agreement line to the production flow process activity1. A service term defines how a service item is consumed in production and how it is invoiced by the vendor.
1: Activity-based subcontracting
NEW QUESTION # 78
A company plans to account for indirect costs related to materials used to manufacture products.
The items used to manufacture products have surcharge rates that depend on the type of product being used.
You need to set up the costing sheet to include surcharges for specific items.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 79
You need to meet the requirements for User2.
What should you configure?
- A. Process over/under transactions.
- B. Cancel the product receipt.
- C. Create a movement journal.
- D. Create a transfer journal.
- E. Correct the product receipt.
Answer: A
NEW QUESTION # 80
A manufacturer is implementing Dynamics 365 Supply Chain Management with warehouse management processes (WMS).
Warehouse workers use hand-held devices to pick and stage batch-tracked products for production. The warehouse manager requires that products are removed from on-hand inventory and consumed when they are picked and staged for production.
You need to remove the products from on-hand inventory.
What should you configure?
- A. flushing principle, start
- B. flushing principle, available al location
- C. manufacturing execution, job card device
- D. mobile device menu item, start production order
Answer: A
Explanation:
The flushing principle is a setting that determines how and when the raw materials are consumed from inventory and registered as work in progress (WIP) for production orders and batch orders1. The flushing principle can be configured at the product level, the bill of materials (BOM) or formula line level, or the production order or batch order line level1.
The Start flushing principle indicates that the material will be automatically consumed when the production order is started1. The amount of material that is consumed is proportional to the quantity that is started. This principle is relevant if, for example, the variance in the consumption is low, the materials are low-value materials, there are no tracking requirements, or there's a short run time on operations1.
In this scenario, the warehouse manager requires that products are removed from on-hand inventory and consumed when they are picked and staged for production. Therefore, the Start flushing principle should be configured for the batch-tracked products. This way, the products will be deducted from inventory and set to WIP as soon as the production order is started on the hand-held device.
NEW QUESTION # 81
A discrete manufacturer uses the time and attendance registration for production operations.
All employees register daily clock in and clock out times during a 40-hour. Monday through Friday workweek.
Pay periods are every two weeks. Workers are paid hourly.
The production manager will create work schedules with the following windows:
* Mandatory work hours
* Work hours during which employees can leave early without accruing absences
* Work hours during which employees can work extra time
If a junior production worker works over 90 hours in a pay period. the worker will receive lime and a half over
80 hours. If a senior production worker works over 90 hours in a pay period, the worker will receive double time over 80 hours.
Vou need to configure the system for these requirements.
Where should you configure this functionality? To answer, drag the appropriate forms to the correct requirements. Each form may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
To configure the system for these requirements, you should use the following forms:
* Configure the overtime calculations: You should use the Workers form. This form allows you to set up and maintain information about workers, such as their personal details, employment status, and compensation1. You can also specify the overtime rate for each worker on the Time and attendance tab2. For example, you can set the overtime rate to 1.5 for junior production workers and 2 for senior production workers.
* Configure the periods of time that a worker can choose whether to work: You should use the Flex groups form. This form allows you to set up and maintain flex groups, which are groups of workers who have flexible work hours3. You can also define flex profiles for each flex group, which specify the mandatory work hours, the flex time hours, and the extra time hours for each day of the week3. For example, you can create a flex profile that has mandatory work hours from 8:00 AM to 4:00 PM, flex time hours from 4:00 PM to 6:00 PM, and extra time hours from 6:00 PM to 8:00 PM.
1: Workers 2: Set up overtime rates 3: Flex groups : [Flex profiles]
NEW QUESTION # 82
A company uses Dynamics 365 Supply Chain Management.
The company wants to use the distributed hybrid topology model to alleviate performance issues at some of its distribution centers. The company has a manufacturing plant, PlantA, which resides at the same physical location as the company home office in FranlFurt Germany.
The company has the following distribution locations:
* Distribution1 covers Ireland.
* Distribute covers the United Kingdom.
* Distribution convers Belgium Germany, and the Netherlands
* Distribution5 covers the Shetland islands.
All distribution warehouses use Dynamic 365 Supply Chain Management to receive and distribute goods from PlantA.
Wherehouse personal use the warehouse app to perform their job function. Because of their proximity to each other, Distribution1, 2, and 3 are managed together and frequently transfer goods between each location.
Due to several connection issues with Dynamic 365 Supply Chain Management, the Shettland islands location struggles to perform tasks.
The company must maintain as little of its own IT infrastructure as possible, especially in remote areas, but still daily activities at all locations.
You need to recommend the appropriate topology configuration.
Which type of scaled should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 83
A customer produces light projection toys for holiday decorations throughout the year.
You are in the first month of a season. Production flows take one day to complete.
The floor supervisor reports that seasonal production targets will not be met. You review the Kanban schedule board and identify thousands of unplanned jobs.
You need to plan the jobs to be completed two weeks prior to the start of the next season.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE; Each correct selection is worth one point.
- A. Set the Automatic planning option for each unscheduled job to Yes.
- B. Set the Automatic planning option for each unscheduled job to No
- C. Manually schedule each unscheduled job forward from the date of the end of the season.
- D. Manually schedule each unscheduled job to the previous period of the end of the next season.
- E. Manually schedule each unscheduled job to the next period of the start of the next season.
- F. Manually schedule each unscheduled job on its due date.
Answer: A,D
NEW QUESTION # 84
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.
The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor ingredient A is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.
You need to ensure that the system is set up to support the manufacturing process.
Solution: Create a dimension-based product master with variants and use the trade agreements to specify the different pricing.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
The solution does not meet the goal. Here is the explanation:
* To ensure that the system is set up to support the process manufacturing of pain-relieving lotions, you should use the following steps1:
* Create a product master for the lotion and release it to the relevant legal entities. On the Product dimension groups page, select Constraint-based configuration as the configuration technology, and select the configuration dimension. On the Released product details page, select Configurable on the Engineer tab.
* Create a constraint-based product configuration model for the lotion and add it as a version to the product master. On the Constraint-based product configuration model details page, add attributes, constraints, subcomponents, BOM lines, and route operations to define the features and structure of the lotion. For example, you can add an attribute for ingredient A and specify its concentration
* as a value. You can also add constraints to limit the combinations of attribute values that are allowed.
* Create a price model for the lotion and link it to the product configuration model. On the Price models page, add price components and specify how they are calculated based on attributes, subcomponents, BOM lines, or route operations. For example, you can add a price component for ingredient A and specify different prices for different concentrations.
* Configure products on sales orders, sales quotations, purchase orders, or production orders by using the Product configuration models page. You can select values for attributes and see how they affect the price of the lotion. You can also view the price details and see how each price component contributes to the total price.
* The solution in the question is not correct, because it does not involve constraint-based product configuration or price models. Creating a dimension-based product master with variants and using trade agreements to specify different pricing would not allow you to handle different concentrations of ingredients or calculate prices based on attributes.
1: Product configuration overview : Create constraint-based configuration : Price models
NEW QUESTION # 85
You need to set up the metal production route and BOM.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set all BOM lines warehouse to the production warehouse.
- B. Set the input warehouse on the resource to the vendor warehouse.
- C. Set the operation route type as Vendor.
- D. Set all the BOM lines to resource consumption.
- E. Set the operation route type as Standard.
Answer: A,B,C
NEW QUESTION # 86
A lean manufacturing company is implementing Dynamics 365 Supply Chain Management.
The manufacturer subcontracts a part of the production process.
Items must support the subcontracting process.
The subcontracted cost must be included in production
You need to configure the production process to meet the subcontracting requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 87
A company produces paints and assembles bicycle frames.
You must account for paint drying time before assembly operations can begin.
You need to set up the operation to encompass queue times.
Which two options can you use? Each correct answer presents pad of the solution.
NOTE: Each correct selection is worth one point.
- A. Build capabilities for each resource related to color.
- B. Enter a value in the queue time after field for the painting operation.
- C. Enter a value in the transit time on the painting operation.
- D. Enter a value in the queue time before field for the assembly operation.
- E. Make a resource group for each size and color and assign that group to the operation.
Answer: B,D
Explanation:
Queue time is the time that a job waits at a work center before or after the job is processed1. You can use queue time to account for paint drying time before assembly operations can begin. You can specify queue time in minutes, hours, or days on the route operations that are attached to the production order2.
To set up the operation to encompass queue times, you should do the following:
Enter a value in the queue time after field for the painting operation. This value indicates how long the painted bicycle frames must wait at the painting work center before they can be moved to the next operation2. For example, if the paint drying time is 24 hours, you can enter 24 in the queue time after field and select Hours as the unit.
Enter a value in the queue time before field for the assembly operation. This value indicates how long the painted bicycle frames must wait at the assembly work center before they can be processed2. For example, if there is a delay between the arrival of the frames and the start of the assembly, you can enter a value that reflects this delay in the queue time before field and select the appropriate unit.
The other options are not correct, because they do not involve queue times. Building capabilities for each resource related to color would allow you to assign resources based on their color proficiency, but it would not account for paint drying time. Entering a value in the transit time on the painting operation would indicate how long it takes to move the painted bicycle frames from one work center to another, but it would not include the waiting time before or after the movement. Making a resource group for each size and color and assigning that group to the operation would allow you to group resources that have similar characteristics and can be used interchangeably in production, but it would not affect the queue times.
1: Queue times 2: Set up operations scheduling
NEW QUESTION # 88
......
Trend for MB-335 pdf dumps before actual exam: https://www.guidetorrent.com/MB-335-pdf-free-download.html
Real Exam Questions and Answers - Microsoft MB-335 Dump is Ready: https://drive.google.com/open?id=18k-3CAKPX5FSHkh5xpP5QQHVO6SsD_75