Ultimate Guide to Prepare HPE0-S22 with Accurate PDF Questions [Nov 29, 2021]
Pass HP With GuideTorrent Exam Dumps
HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam Requirements are as follow
Candidates who wish to acquire the HPE Master ASE - Server Solutions Architect certification and who have already own the HPE ASE - Server Solutions certification. Although anyone can take the exam, candidates are strongly recommended to have at least six years of experience in the architecture of HPE server solutions. Applicants must have advanced knowledge of industry-standard technology and business sense through training and practical experience.
There is no prerequisite for Salesforce HPE Master ASE - Server Solutions Architect (HPE0-S22) certification.
Great Solution to prepare HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam
The study guide of GuideTorrent for the HPE Master ASE - Server Solutions Architect (HPE0-S22) is the best solution for exam preparation. It contains knowledge on each subject of the program and is simply the best in all aspects. The information contained in these dumps of HPE Master ASE - Server Solutions Architect (HPE0-S22) is transmitted using a very simple and interactive form of questions and answers. This study guide is really wondrous and contains everything you need to know. Candidates for the HPE Master ASE - Server Solutions Architect (HPE0-S22) should have a thorough knowledge and understanding of all the questions and answers of the HPE Master ASE - Server Solutions Architect (HPE0-S22) in our guide. GuideTorrent is usually known for a quality of exam dumps, including CISCO, IBM, Microsoft, Oracle, Exin, EMC, CCNA, and many more. Obtaining all these certificates is not an easy job since learners have to study hard. Exam preparation also takes a long time. Therefore, by examining the needs of the students, we designed various exam dumps and practice tests. Our products, including the study guide, will help learners pass the exams.
We are the best in the sector thanks to our highly qualified specialists. The exam dumps are authentic because the high-performance professionals have prepared them. Each practice exam contains questions and answers to help students pass their final exams.
No one likes failure, mainly in complicated areas where certification requires a lot of research, planning, and attention. A single attempt is so stressful that it could even break learners' nerves. Our exam dumps are so successful that you will forget about failure. The questions and answers are designed in such a best way that there is no chance of failure. However, there is almost no case in which the learner has failed after receiving our help, but even if that happens we offer the return of the full payment.
In addition to our comprehensive study guide, we also offer dumps of certified HPE Master ASE - Server Solutions Architect (HPE0-S22), if you want a quick and exam-oriented preparation. Any information in this HPE Master ASE - Server Solutions Architect HPE0-S22 dumps is valuable. Questions and answers from the HPE Master ASE - Server Solutions Architect (HPE0-S22) include important topics from the HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Program and provides easy-to-learn information for easy access. To enable you to further tighten the original exam model and face the challenges of the HPE Master ASE - Server Solutions Architect (HPE0-S22), they offer you the best solution. They show you the true nature and style of the questions asked by the HPE Master ASE - Server Solutions Architect (HPE0-S22). Trying these practice tests will give you confidence. Identifying your weaknesses will guide you to prepare them and improve your chances of success.
NEW QUESTION 57
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo 6000
- B. HPE Apollo r2800
- C. HPE Apollo 8000
- D. HPE Apollo r2200
Answer: B
Explanation:
The Apollo r2200 and r2800 would both be a possible candidate with 4 x dual CPU servers, but the request is that some nodes must be compute nodes and some must be data nodes. The r2200 has fixed disks to every node, whereas the r2800 can be flexible e.g. 2 nodes with two disk drives and two nodes with 4 disk drives.
NEW QUESTION 58
Which factors must the architect consider to help define an appropriate HPE server solution to meet a customer's needs?
- A. the number of users for the application, the IT resources required by the application, which applications can be consolidated, and whether there are any Service Level Agreement (SLA) requirements
- B. the legacy hardware and software solutions that the customer is currently running, whether the customer is standardized on x86 architectures, and which storage and networking protocols the customer is using
- C. the installed base of ProLiant, 3PAR, and ProCurve products, and whether any Cloudline opportunities exist at the customer site
- D. whether the customer is considering solutions for the New Style of IT, for Security, for Big Data, or for Mobility
Answer: A
NEW QUESTION 59
A customer's Gen9 web server resides behind a firewall.
What is the most secure and efficient method to monitor this server?
- A. Create Firewall rules and install WBEM.
- B. Use Intelligent Provisioning.
- C. Create Firewall rules and install System Management Homepage in Protected Mode.
- D. Use Agentless Management.
Answer: A
NEW QUESTION 60
A customer has HPE BladeSystem BL460c Gen9 blades with two processors and 512GB of memory. The blades are running a MS-SQL database on a clustered 2TB SAS virtual volume that is exported from an HPE 3PAR StoreServ 8200. The customer reports that the MS-SQL database is performing poorly.
After extensive performance trending analysis, it is determined that the database front-end I/O requirements are unpredictable and often exceed 100,000 IOPs with latency in excess
30ms at critical times.
Which solution should the architect recommend to resolve the performance issue with consideration to cost and complexity?
- A. Install SSD drives local to the BL460c.
- B. Increase the memory on the blades to 2TB.
- C. Install an HPE IO Accelerator on the blade.
- D. Add Adaptive Optimization licensing.
Answer: A
NEW QUESTION 61
An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?
- A. IT staff can open a Remote Console to any cartridge through the iLO CM.
- B. Remote console access is not supported for cartridges; IT staff should use local consoles instead.
- C. Remote console access is only supported when a cartridge is part of an HPE Helion CloudSystem solution.
- D. IT staff can open a Remote Console to any cartridges linked to an mRCA through the iLO CM.
Answer: D
Explanation:
Explanation/Reference:
Reference https://h20565.www2.hpe.com/hpsc/doc/public/display?
sp4ts.oid=5365577&docLocale=en_US&docId=emr_na-c04785597
NEW QUESTION 62
A customer has 1,000 virtual machines that run on VMware ESXi servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines.
Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?
- A. HPE Insight Control
- B. HPE Helion CloudSystem 9
- C. HPE Cloud Optimizer for HPE OneView
- D. HPE Operations Analytics for HPE OneView
Answer: C
Explanation:
HPE Cloud Optimizer "Capacity management: Fix allocation problems * Reclaim over-allocated vCPU, memory from VMs using the right-sizing analysis reports * Reclaim storage lost to old snapshots - usually a good 30% of spaced used in most datacenters" https://h20195.www2.hpe.com/v2/GetPDF.aspx/c05183790.pdf
NEW QUESTION 63
A customer's Gen9 web server resides behind a firewall.
What is the most secure and efficient method to monitor this server?
- A. Create Firewall rules and install WBEM.
- B. Use Intelligent Provisioning.
- C. Create Firewall rules and install System Management Homepage in Protected Mode.
- D. Use Agentless Management.
Answer: A
NEW QUESTION 64
An architect finds several vulnerabilities with a customer's digital enterprise that could lead to data loss on a third-party storage system for critical business segments.
Which solution should the architect propose to help the customer to protect their digital enterprise?
- A. an HPE StoreVirtual solution configured as a secondary node to replicate the critical data on the third-party storage
- B. an HPE 3PAR StoreServ solution configured to peer persistence with the third-party storage to protect the critical data
- C. an HPE StoreAll solution configured to migrate the critical data to object-based storage
- D. an HPE StoreOnce solution configured to take backups of the critical data from the third- party storage
Answer: B
NEW QUESTION 65
An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?
- A. Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
- B. A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
- C. Mixing different models of cartridges in the same chassis is not supported
- D. A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at
1Gbps rather than 10Gbps
Answer: B
NEW QUESTION 66
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment.
Which solution should the architect propose to protect the customer from this threat?
- A. Use Smart Array Controllers.
- B. Enable Legacy BIOS mode.
- C. Use encrypted drives.
- D. Enable UEFI secure boot mode.
Answer: D
Explanation:
References:
NEW QUESTION 67
An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?
- A. Change the 4-QSFP+Uplink Module to a 16-SFP+ Uplink Module.
- B. Add another HPE Moonshot 45XGc Switch and 4-QSFP+Uplink Module.
- C. Add another FlexibleLOM adapter for each cartridge.
- D. Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
Answer: C
NEW QUESTION 68
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution,
Which solution meets these requirements?
- A. HPE InsightControl server provisioning (ICsp)
- B. HPE Intelligent Provisioning (IP)
- C. HPE OneView 2.0
- D. HPE Insight Cluster Management Utility (CMU)
Answer: D
Explanation:
Referencehttps://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja
& uact=8&ved=0ahUKEwjU36a30sHTAhVJShQKHSt0BhYQFggnMAA&url=http%3A%2F%
2 Fwww.hpe.com%2Fsupport%2Fmoonshot_os_deployment_en&usg=AFQjCNHzc8octr9gt
YrHDWIERZNfWTSoEw&sig2=ITJAdGidDUOSlN-6u7QKeQ
NEW QUESTION 69
What defines lease rate factor (LRF)?
- A. the cost of the direct capital expenditure, divided by the expected lifespan of the equipment
- B. the sum of all costs incurred
- C. the periodic rental payment, expressed as a percentage of equipment cost
- D. the expected time to recover the initial investment
Answer: C
NEW QUESTION 70
A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?
- A. All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.
- B. The customer can select from different management protocols between SNMP V2 and SNMP VS to match the security requirements.
- C. WBEM Providers will be used for any server managed by HPE OneView.
- D. HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
Answer: C
NEW QUESTION 71
A customer needs an HPE Apollo 6000 solution and Remote Direct Memory Access (RDMA).
Which network interconnects should the architect recommend for this solution? (Choose two.)
- A. Infiniband
- B. 12G SAS
- C. 16 Gb Fibre Channel
- D. FlexFabric
- E. 1 GbEthernet
Answer: A,D
NEW QUESTION 72
An architect is determining the amount of memory to propose for an HPE XL230a compute tray.
The customer specifies several requirements, properties, and parameter of the application.
Which factor will critically affect the memory amount requirement to prevent a potential memory bottleneck?
- A. The application is single-threaded high performance computing (HPC).
- B. The application requires CPUs with multiple cores to support multiple HPC jobs.
- C. The application stores data on local drives.
- D. Secure Encryption of locally stored data is required.
Answer: B
NEW QUESTION 73
A customer purchases a hyperscale solution based on the HPE Moonshot platform and needs a management tool is suitable for this environment and meets the customer's needs?
- A. HPE OneView with HPE Operation Analytics plugin
- B. HPE Insight Cluster Management Utility
- C. HPE Helion Cloud System 9 Foundation
- D. HPE Cloud OS for HPE Moonshot
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 74
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE BladeSystem c7000 with BL460G Gen9 Servers
- B. HPE Apollo 4500 System
- C. HPE Apollo 6000 System
- D. HPE Superdome X
Answer: D
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-5294ENN.pdf (page 5)
NEW QUESTION 75
A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m710p
- B. HPE m700
- C. HPE m710
- D. HPE m400
Answer: B
NEW QUESTION 76
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS. Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?
- A. processor and memory
- B. drive type (HDD versus SSD) and drive capacity
- C. adapter bandwidth and processors
- D. drive capacity and memory
Answer: D
NEW QUESTION 77
An architect is designing an HPE Apollo 6000 solution to support an HPC application that is highly parallel and involves a lot of communication between compute nodes. The architect is choosing the FlexibleLOM options for the compute trays.
Which technology should the architect ensure that the trays support?
- A. RDMA over Converged Ethernet (RoCE)
- B. VXLAN offloading
- C. iSCSI hardware imitator
- D. Fibre Channel over Ethernet (FCoE)
Answer: C
NEW QUESTION 78
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- B. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
- C. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
- D. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
Answer: B
NEW QUESTION 79
An architect takes the following notes during a meeting with a customer:
plans to introduce an entirely new service offering to customers
servers will be virtualized and will consume large amounts of storage space
project is to operate in an isolated section of the data center with limited access to the corporate
network
need flexibility to grow quickly as required by the new service demands on the infrastructure
has no repeatable process for firmware management
concerned about how long it will take for the project team to become productive on the new
infrastructure
Which solution should the architect propose to help the customer overcome all of its project challenges?
- A. HPE Apollo 6000 solution with HPE 3PAR storage
- B. HPE ConvergedSystem 700 solution with HPE 3PAR storage
- C. HPE BladeSystem solution with HPE 3PAR storage
- D. HPE Apollo 2000 solution with HPE 3PAR storage
Answer: A
NEW QUESTION 80
......
Latest HPE0-S22 Exam Dumps - Valid and Updated Dumps: https://www.guidetorrent.com/HPE0-S22-pdf-free-download.html