The 350-601 PDF Dumps Greatest for the Cisco Exam Study Guide!
Read Online 350-601 Test Practice Test Questions Exam Dumps
Target Audience for Cisco 350-601 Exam
The Cisco 350-601 exam is developed mainly for those specialists who perform the implementation of core data center technologies, including storage network, network, compute, security, and automation. To ace this test, the students need to show that they have the ability to identify products in the Cisco MDS and Cisco Data Center Nexus families and also possess the professional familiarity with hypervisor technologies such as VMware. In addition, the candidates are required to have familiarity with SANs, Fiber Channel protocol, and Ethernet and TCP/IP networking. They also need to show that they have a deep understanding of the Cisco Enterprise Data Center architecture and server system architecture and design.
Cisco 350-601 (Implementing Cisco Data Center Core Technologies) certification exam is a comprehensive test that evaluates an individual's knowledge and skills in the implementation of core data center technologies. 350-601 exam covers a diverse range of topics, including network design, automation, virtualization, storage, and security. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification validates the candidate's ability to provide solutions for modern data center challenges.
Cisco 350-601 (Implementing Cisco Data Center Core Technologies (350-601 DCCOR)) Exam is a certification exam offered by Cisco for individuals who want to gain knowledge and skills required to implement and manage data center technologies. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification exam is intended for individuals who work with data center infrastructure, such as network engineers, systems engineers, and technical solutions architects. 350-601 exam is designed to test an individual's knowledge of data center technologies, including networking, storage, compute, and automation.
NEW QUESTION # 220
What is required for using Puppet in a Cisco NX-OS environment?
- A. XML management interface
- B. NX-API
- C. Open Agent Container
- D. OpenNP
Answer: C
Explanation:
Puppet agents cannot run natively on Cisco Nexus 7000 and Cisco Nexus 7700 switches.
Instead, they run in a special virtual environment called the Open Agent Container (OAC).
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/ b_Cisco_Nexus_7000_Series_NX- OS_Programmability_Guide/b_Cisco_Nexus_7000_Series_NX- OS_Programmability_Guide_chapter_01001.pdf
NEW QUESTION # 221
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: B
Explanation:
NEW QUESTION # 222 
Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements
* The local update source for leaf switches must be loopback 1
* The router ID must be the local loopback IP address
* The external BGP connections must use a template name
Drag and drop the configuration snippets from the bottom to complete the configuration
Answer:
Explanation:
NEW QUESTION # 223
An engineer must export the Cisco UCS Manager configuration for backup purposes. The requirement is to export the configuration that contains the AAA and RBAC configuration Also the file must be stored a human-readable format 'Much backup type must be selected to meet these requirements?
- A. fun state
- B. all configuration
- C. logical configuration
- D. system configuration
Answer: D
NEW QUESTION # 224
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)
- A. A contract must be defined between the EPGs
- B. The corresponding bridge domains must be configured in legacy mode
- C. The EPGs must be configured as static ports
- D. The EPGs must link directly to the corresponding AAEP
- E. The EPGs must be linked to the correct physical domain
Answer: A,D
NEW QUESTION # 225
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements?
- A. Type: All configuration
Protocol: FTP - B. Type: System configuration
Protocol: SCP - C. Type: Full state
Protocol: SFTP - D. Type: Logical configuration
Protocol: TFTP
Answer: D
Explanation:
This type of backup includes information about VLANs, VSANs, and other policies and is in XML format, which is human-readable. Although the question specifies the use of UDP, none of the options provided use UDP as they are all TCP-based protocols; however, TFTP is often confused with being UDP-based because it is a lightweight protoco
NEW QUESTION # 226
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?
- A. Data center
- B. IP address
- C. VMM domain
- D. VM name
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_
NEW QUESTION # 227
Refer to the exhibit.
Which result of running the command is true?
- A. MRIB is flushed
- B. PIM join messages are suspended.
- C. Multicast traffic forwarding is suspended.
- D. The PIM database is deleted.
Answer: A
NEW QUESTION # 228
A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
Explanation:
Explanation
The command write memory is not valid in NX-OS
The "event-default"
NEW QUESTION # 229
Refer to the exhibit.
What is the result of this series of commands?
- A. It activates the firmware on the next adapter boot.
- B. It updates the firmware on adapter 1/1/1 immediately.
- C. It verifies the firmware update on the server.
- D. It reboots the server immediately.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4
NEW QUESTION # 230
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>
NEW QUESTION # 231
What is a characteristic of the install all command on the cisco Nexus series switch?
- A. Impact data plan traffic
- B. Automatically checks the image integrity
- C. Upgrades only certain modules
- D. Continues the upgrade process if any step in the sequence fails
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/ b_Cisco_Nexus_9000_Series_NXOS_ Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.html
NEW QUESTION # 232
What is a benefit of using the Cisco UCS Lightweight upgrade feature?
- A. The firmware version of a component is updated only when it has been modified
- B. A soft reboot is available for the fabric interconnects.
- C. Security updates are scheduled with the next reboot of the fabric interconnects.
- D. All servers are rebooted to push the latest updates.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Administration/2-0
NEW QUESTION # 233
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)
- A. Reboot Policy
- B. Global Policy
- C. Power Control Policy
- D. Maintenance Policy
- E. Boot Policy
Answer: A,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem
NEW QUESTION # 234
Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.
Answer:
Explanation:
NEW QUESTION # 235 
Refer to the exhibit. A network engineer is implementing a configuration checkpoint on a Cisco Nexus 9000 Series Switch. The configuration must skip any existing vPC configuration errors and must complete if there are any configuration errors. The engineer finished the vPC domain configuration part. Which command completes the checkpoint implementation?
- A. stop-at-first-failure
- B. atomic
- C. best-effort
- D. verbose
Answer: C
NEW QUESTION # 236
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: D
NEW QUESTION # 237
When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?
- A. Fifteen SSH sessions remain connected to the switch.
- B. A ping sweep is performed on a network that is connected through a switch.
- C. A web server that is connected to a switch is affected by a DDoS attack.
- D. A large system image is copied to a switch by using the default VRF.
Answer: D
Explanation:
A large image upload is more probable to generate that level of traffic.
15 SSH session would mean an average of 200pps per session, and they simply mention that the session remain connected, if there are no inputs in them they have 0pps and even a full config push would probably not require 200 packets total.
class copp-system-p-class-management
set cos 2
police cir 3000 pps bc 32 packets conform transmit violate drop
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/security/configuration/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide/b_Cisco_Nexus_9000_Series_NXOS_ Security_Configuration_Guide_chapter_010001.html
NEW QUESTION # 238
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A. increased network throughput
- B. Increased compression efficiency
- C. GPU acceleration
- D. offline encryption acceleration
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%
20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%
20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most
%20storage%20workloads.
NEW QUESTION # 239
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Answer:
Explanation:
Explanation
Graphical user interface Description automatically generated with medium confidence
2,4,5 - NAS 1,3 - SAN
NEW QUESTION # 240
Which component becomes unavailable for a maximum of 80 seconds during a nondisruptive Cisco NX-OS upgrade?
- A. supervisor module
- B. control plane
- C. data plane
- D. default VSAN
Answer: B
NEW QUESTION # 241
......
350-601 Certification All-in-One Exam Guide Nov-2024: https://www.guidetorrent.com/350-601-pdf-free-download.html
Easily To Pass New 350-601 Premium Exam: https://drive.google.com/open?id=1SaNlsw4C0BaZaVKM-aN1sFSnOBlDAeYA