Online Questions - Valid Practice C-ABAPD-2309 Exam Dumps Test Questions
100% Real C-ABAPD-2309 dumps - Brilliant C-ABAPD-2309 Exam Questions PDF
NEW QUESTION # 23 
The "demo_ods_assoc_spfi data source referenced in line #4 contains a field "connid" which you would like to expose in the element list.
Which of the following statements would do this if inserted on line #8?
- A. spfli-connid,
- B. _spfli.connid/
- C. demo_ods_assoc_spfli.connid,
- D. demo_ods_assoc_spfli-connid/
Answer: C
Explanation:
The statement that can be used to expose the field "connid" of the data source "demo_ods_assoc_spfli" in the element list is A. demo_ods_assoc_spfli.connid,. This statement uses the dot notation to access the field
"connid" of the data source "demo_ods_assoc_spfli", which is an association defined on line #4. The association "demo_ods_assoc_spfli" links the data source "demo_ods" with the table "spfli" using the field
"carrid". The statement also ends with a comma to separate it from the next element in the list12.
You cannot do any of the following:
* B. demo_ods_assoc_spfli-connid/: This statement uses the wrong syntax to access the field "connid" of the data source "demo_ods_assoc_spfli". The dash notation is used to access the components of a structure or a table, not the fields of a data source. The statement also ends with a slash, which is not a valid separator for the element list12.
* C. spfli-connid,: This statement uses the wrong data source name to access the field "connid". The data source name should be "demo_ods_assoc_spfli", not "spfli". The statement also uses the wrong syntax to access the field "connid", as explained above12.
* D. _spfli.connid/: This statement uses the wrong data source name and the wrong separator to access the field "connid". The data source name should be "demo_ods_assoc_spfli", not "_spfli". The statement also ends with a slash, which is not a valid separator for the element list12.
References: 1: ABAP CDS - SELECT, select_list - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - SELECT, from - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 24
Exhibit
Which of the following ABAP SQL snippets are syntactically correct ways to provide a value for the parameter on line #4? Note: There are 2 correct answers to this question
- A. ...SELECT * FROM deno_cds_param_view_entity (p_date - '20230101')... )
- B. ...SELECT * FROM deno_cds_param_view_entity (p_date = @
(cl_abap_context_info->get_system_date ())... - C. ...SELECT * FROM demo_cds_param_view_entity (p_date: 20238181')... )
- D. ...SELECT * FROM demo_cds_param_view entity (p_date: $session.system_date)...
Answer: A,B
NEW QUESTION # 25
Which patterns raise an exception? Note: There are 3 correct answers to this question.
- A. DATA: Ev target TYPE p DECIMALS 3. CONSTANTS: gcojntl TYPE i VALUE 2. Ev_target -U EXACT #2 / gcojntl ).
- B. DATA: gv_target TYPE d. s/ □ CONSTANTS: gco_date TYPE d VALUE '20331233*. gv_target EXACT ( geo_date).
- C. DATA: gv_target TYPE p DECIMALS 2. CONSTANTS: go intl TYPE i VALUE 3. gv_target -U EXACT (2 gcojntl).
- D. DATA: gv_target TYPE string. □ CONSTANTS: gco_string TYPE LENGTH 16 VALUE 0123456789ABCDEF*. gv_target = EXACT # gco_string+5 (5) ).
- E. DATA: gv_target TYPE c LENGTH 5. V □ CONSTANTS: ECO string TYPE string VALUE 0123456789ABCDEF". gv_target - EXACT (gco_string + 5 (6) ).
Answer: B,C,E
Explanation:
The patterns that raise an exception are those that use the constructor operator EXACT to perform a lossless assignment or calculation, but the result cannot be converted to the target data type without data loss. The following are the explanations for each pattern:
A: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the calculation 2 * 3 is 6, which cannot be assigned to a packed number with two decimal places without losing the integer part. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
B: This pattern does not raise an exception because the result of the substring expression gco_string+5(5) is '6789A', which can be assigned to a string without data loss. The operator EXACT # is used to perform a lossless assignment with the data type of the argument.
C: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the substring expression gco_string+5(6) is '6789AB', which cannot be assigned to a character field with length 5 without losing the last character. The operator EXACT is used to perform a lossless assignment with the data type of the target field.
D: This pattern does not raise an exception because the result of the calculation 2 / 2 is 1, which can be assigned to a packed number with three decimal places without data loss. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
E: This pattern raises the exception CX_SY_CONVERSION_ERROR because the constant gco_date contains an invalid value '20331233' for a date data type, which cannot be converted to a valid date. The operator EXACT is used to perform a lossless assignment with the data type of the target field.
NEW QUESTION # 26 
What are valid statements? Note: There are 2 correct answers to this question.
- A. The code creates an exception object and raises an exception.
- B. "paraml11 and "param2" are predefined names.
- C. "zcxl" is a dictionary structure, and "paraml" and "param2" are this structure.
- D. "previous" expects the reference to a previous exception
Answer: A,D
Explanation:
The code snippet in the image is an example of using the RAISE EXCEPTION statement to raise a class-based exception and create a corresponding exception object. The code snippet also uses the EXPORTING addition to pass parameters to the instance constructor of the exception class12. Some of the valid statements about the code snippet are:
* The code creates an exception object and raises an exception: This is true. The RAISE EXCEPTION statement raises the exception linked to the exception class zcxl and generates a corresponding exception object. The exception object contains the information about the exception, such as the message, the source position, and the previous exception12.
* "previous" expects the reference to a previous exception: This is true. The previous parameter is a predefined parameter of the instance constructor of the exception class cx_root, which is the root class of all class-based exceptions. The previous parameter expects the reference to a previous exception object that was caught during exception handling. The previous parameter can be used to chain multiple exceptions and preserve the original cause of the exception12.
You cannot do any of the following:
* "zcxl" is a dictionary structure, and "paraml" and "param2" are this structure: This is false. zcxl is not a dictionary structure, but a user-defined exception class that inherits from the predefined exception class cx_static_check. param1 and param2 are not components of this structure, but input parameters of the instance constructor of the exception class zcxl. The input parameters can be used to pass additional information to the exception object, such as the values that caused the exception12.
* "paraml" and "param2" are predefined names: This is false. param1 and param2 are not predefined names, but user-defined names that can be chosen arbitrarily. However, they must match the names of the input parameters of the instance constructor of the exception class zcxl. The names of the input parameters can be declared in the interface of the exception class using the RAISING addition12.
References: 1: RAISE EXCEPTION - ABAP Keyword Documentation - SAP Online Help 2: Class-Based Exceptions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 27
Why would you use Access Controls with CDS Views? Note: There are 2 correct answers to this question.
- A. All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization.
- B. Only the data corresponding to the user's authorization is transferred from the database to the application layer.
- C. You do not have to remember to implement AUTHORITY CHECK statements.
- D. The system field sy-subrc is set, giving you the result of the authorization check
Answer: B,C
Explanation:
You would use Access Controls with CDS Views for the following reasons:
A) Only the data corresponding to the user's authorization is transferred from the database to the application layer. This is true because Access Controls allow you to define CDS roles that specify the authorization conditions for accessing a CDS view. The CDS roles are evaluated for every user at runtime and the system automatically adds the restrictions to the selection conditions of the CDS view. This ensures that only the data that the user is authorized to see is read from the database and transferred to the application layer. This improves the security and the performance of the data access1.
C) You do not have to remember to implement AUTHORITY CHECK statements. This is true because Access Controls provide a declarative and centralized way of defining the authorization logic for a CDS view. You do not have to write any procedural code or use the AUTHORITY CHECK statement to check the user's authorization for each data source or field. The system handles the authorization check automatically and transparently for you2.
The following reasons are not valid for using Access Controls with CDS Views:
B) The system field sy-subrc is set, giving you the result of the authorization check. This is false because the system field sy-subrc is not used by Access Controls. The sy-subrc field is used by the AUTHORITY CHECK statement to indicate the result of the authorization check, but Access Controls do not use this statement. Instead, Access Controls use CDS roles to filter the data according to the user's authorization2.
D) All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization. This is false because Access Controls do not load all the data from the data sources into the application layer. Access Controls filter the data at the database layer, where the data resides, and only transfer the data that the user is authorized to see to the application layer. This reduces the data transfer and the memory consumption of the application layer1.
NEW QUESTION # 28
Which of the following ON conditions must you insert in place of "???"?
- A. ON Z_Sourcel.camer_id = 7_Source2 carrier_id
- B. ON Sprojection. Carrier Source2.carrier
- C. ON Sprojection.carrier_id=Z_Source2.carrier_id
- D. ON Sprojection Camer=Source2 carrier_id
Answer: C
Explanation:
The correct ON condition that must be inserted in place of "???" is:
ON Sprojection.carrier_id=Z_Source2.carrier_id
This ON condition specifies the join condition between the CDS view Sprojection and the database table Z_Source2. The join condition is based on the field carrier_id, which is the primary key of both the CDS view and the database table. The ON condition ensures that only the records that have the same value for the carrier_id field are joined together1.
The other options are not valid ON conditions, because:
* A. ON Z_Sourcel.camer_id = 7_Source2 carrier_id is not valid because Z_Sourcel and 7_Source2 are not valid data sources in the given code. There is no CDS view or database table named Z_Sourcel or
7_Source2. The correct names are Z_Source1 and Z_Source2. Moreover, the field camer_id is not a valid field in the given code. There is no field named camer_id in any of the data sources. The correct name is carrier_id.
* B. ON Sprojection Camer=Source2 carrier_id is not valid because Sprojection and Source2 are not valid data sources in the given code. There is no CDS view or database table named Sprojection or Source2.
The correct names are Sprojection and Z_Source2. Moreover, the field Camer is not a valid field in the given code. There is no field named Camer in any of the data sources. The correct name is carrier_id. Furthermore, the ON condition is missing the dot (.) operator between the data source name and the field name, which is required to access the fields of the data source1.
* C. ON Sprojection. Carrier Source2.carrier is not valid because Carrier and carrier are not valid fields in the given code. There is no field named Carrier or carrier in any of the data sources. The correct name is carrier_id. Moreover, the ON condition is missing the dot (.) operator between the data source name and the field name, which is required to access the fields of the data source1.
References: 1: ON Condition - ABAP Keyword Documentation
NEW QUESTION # 29
You have two internal tables itab1 and itab2.What is true for using the expression itab1 = corresponding #( itab2 )? Note: There are 2 correct answers to this question.
- A. itab1 and itab2 must have at least one field name in common.
- B. itab1 and itab2 must have the same data type.
- C. Fields with the same name and the same type will be copied from itab2 to itab1.
- D. Fields with the same name but with different types may be copied from itab2 to itab1.
Answer: A,C
Explanation:
The expression itab1 = corresponding #( itab2 ) is a constructor expression with the component operator CORRESPONDING that assigns the contents of the internal table itab2 to the internal table itab1. The following statements are true for using this expression:
* B: itab1 and itab2 must have at least one field name in common. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for internal tables. If itab1 and itab2 do not have any field name in common, the expression will not assign any value to itab1 and it will remain initial or unchanged1
* C: Fields with the same name and the same type will be copied from itab2 to itab1. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for
* internal tables. If the columns have the same name but different types, the assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1 The following statements are false for using this expression:
* A: Fields with the same name but with different types may be copied from itab2 to itab1. This is not true, as explained in statement C. The assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1
* D: itab1 and itab2 must have the same data type. This is not true, as the component operator CORRESPONDING can assign the contents of an internal table of one type to another internal table of a different type, as long as they have at least one field name in common. The target type of the expression is determined by the left-hand side of the assignment, which is itab1 in this case. The expression will create an internal table of the same type as itab1 and assign it to itab11 References: CORRESPONDING - Component Operator - ABAP Keyword Documentation
NEW QUESTION # 30
Why would you use Access Controls with CDS Views? Note: There are 2 correct answers to this question.
- A. All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization.
- B. Only the data corresponding to the user's authorization is transferred from the database to the application layer.
- C. You do not have to remember to implement AUTHORITY CHECK statements.
- D. The system field sy-subrc is set, giving you the result of the authorization check
Answer: B,C
Explanation:
You would use Access Controls with CDS Views for the following reasons:
* A. Only the data corresponding to the user's authorization is transferred from the database to the application layer. This is true because Access Controls allow you to define CDS roles that specify the authorization conditions for accessing a CDS view. The CDS roles are evaluated for every user at runtime and the system automatically adds the restrictions to the selection conditions of the CDS view.
This ensures that only the data that the user is authorized to see is read from the database and transferred to the application layer. This improves the security and the performance of the data access1.
* C. You do not have to remember to implement AUTHORITY CHECK statements. This is true because Access Controls provide a declarative and centralized way of defining the authorization logic for a CDS
* view. You do not have to write any procedural code or use the AUTHORITY CHECK statement to check the user's authorization for each data source or field. The system handles the authorization check automatically and transparently for you2.
The following reasons are not valid for using Access Controls with CDS Views:
* B. The system field sy-subrc is set, giving you the result of the authorization check. This is false because the system field sy-subrc is not used by Access Controls. The sy-subrc field is used by the AUTHORITY CHECK statement to indicate the result of the authorization check, but Access Controls do not use this statement. Instead, Access Controls use CDS roles to filter the data according to the user's authorization2.
* D. All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization. This is false because Access Controls do not load all the data from the data sources into the application layer. Access Controls filter the data at the database layer, where the data resides, and only transfer the data that the user is authorized to see to the application layer. This reduces the data transfer and the memory consumption of the application layer1.
References: 1: Access Controls | SAP Help Portal 2: ABAP CDS - Access Control - ABAP Keyword Documentation
NEW QUESTION # 31
Which of the following are parts of answers to this question.
- A. Field list
- B. Extension
- C. Partitioning attributes
- D. Semantic table attributes
Answer: A,B
Explanation:
A CDS view is a data definition that defines a data structure and a data selection from one or more data sources. A CDS view consists of several parts, but two of them are:
* Extension: An extension is an optional clause that allows a CDS view to extend another CDS view by adding new elements, annotations, or associations. The extension clause has the syntax EXTEND VIEW view_name WITH view_name. The first view_name is the name of the CDS view that is being extended, and the second view_name is the name of the CDS view that is doing the extension1.
* Field list: A field list is a mandatory clause that specifies the elements of the CDS view. The field list has the syntax SELECT FROM data_source { element_list }. The data_source is the name of the data
* source that the CDS view selects data from, and the element_list is a comma-separated list of elements that the CDS view exposes. The elements can be fields of the data source, expressions, associations, or annotations2.
The following example shows a CDS view that extends another CDS view and defines a field list:
@AbapCatalog.sqlViewName: 'ZCDS_EXT' define view Z_CDS_Extension extend view Z_CDS_Base with Z_CDS_Extension as select from ztable { // field list key ztable.id as ID, ztable.name as Name, ztable.age as Age, // extension @Semantics.currencyCode: true ztable.currency as Currency } The other options are not parts of a CDS view, but rather related concepts:
* Partitioning attributes: Partitioning attributes are attributes that are used to partition a table into smaller subsets of data. Partitioning attributes are defined in the ABAP Dictionary for transparent tables and can improve the performance and scalability of data access. Partitioning attributes are not part of the CDS view definition, but rather the underlying table definition3.
* Semantic table attributes: Semantic table attributes are attributes that provide additional information about the meaning and usage of a table. Semantic table attributes are defined in the ABAP Dictionary for transparent tables and can be used to enhance the data modeling and consumption of the table. Semantic table attributes are not part of the CDS view definition, but rather the underlying table definition4.
References: 1: Extending CDS Views | SAP Help Portal 2: SELECT List - ABAP Keyword Documentation 3:
Partitioning Attributes - ABAP Keyword Documentation 4: Semantic Table Attributes - ABAP Keyword Documentation
NEW QUESTION # 32
Which of the following are features of Core Data Services? Note: There are 3 correct answers to this question.
- A. Delegation
- B. Inheritance
- C. Associations
- D. Annotations
- E. Structured Query Language (SQL)
Answer: C,D,E
Explanation:
Explanation
Core Data Services (CDS) is a framework for defining and consuming semantically rich data models in SAP HANA. CDS supports various features that enhance the capabilities of SQL and enable developers to create data models that are optimized for performance, readability, and extensibility12. Some of the features of CDS are:
Associations: Associations are a way of defining relationships between CDS entities, such as tables or views. Associations enable navigation and path expressions in CDS queries, which allow accessing data from related entities without explicit joins. Associations also support cardinality, referential constraints, and cascading options34.
Annotations: Annotations are a way of adding metadata to CDS entities or their elements, such as fields or parameters. Annotations provide additionalinformation or instructions for the CDS compiler, the database, or the consumers of the CDS views. Annotations can be used for various purposes, such as defining access control, UI rendering, OData exposure, or search capabilities5 .
Structured Query Language (SQL): SQL is the standard language for querying and manipulating data in relational databases. CDS is based on SQL and extends it with additional features and syntax. CDS supports SQL features such as joins, aggregations, filters, expressions, functions, and subqueries. CDS also supports SQL Script, which is a scripting language for stored procedures and functions in SAP HANA .
You cannot do any of the following:
Inheritance: Inheritance is not a feature of CDS. Inheritance is a concept in object-oriented programming that allows a class to inherit the properties and methods of another class. CDS does not support object-oriented programming or classes.
Delegation: Delegation is not a feature of CDS. Delegation is a concept in object-oriented programming that allows an object to delegate some of its responsibilities to another object. CDS does not support object-oriented programming or objects.
References: 1: Core Data Services (CDS) | CAPire 2: Core Data Services [CDS] in SAP S/4 HANA | SAP Blogs 3: Associations in Core Data Services (CDS) | SAP Help Portal 4: [CDS DDL - Association - ABAP Keyword Documentation - SAP Online Help] 5: [Annotations in Core Data Services (CDS) | SAP Help Portal]
[CDS DDL - Annotation - ABAP Keyword Documentation - SAP Online Help] : [Structured Query Language (SQL) | SAP Help Portal] : [CDS DDL - SQL Features - ABAP Keyword Documentation - SAP Online Help] : [Object-Oriented Programming in ABAP | SAP Help Portal]
NEW QUESTION # 33
In ABAP SQL, which of the following can be assigned an alias? Note: There are 2 correct answers to this question.
- A. database table
- B. field (from field list)
- C. group criterion (from group by clause)
- D. order criterion (from order by clause)
Answer: A,B
Explanation:
In ABAP SQL, an alias is a temporary name that can be assigned to a field or a database table in a query. An alias can be used to make the query more readable, to avoid name conflicts, or to access fields or tables with long names. An alias is created with the AS keyword and is only valid for the duration of the query1.
The following are examples of how to assign an alias to a field or a database table in ABAP SQL:
* B. field (from field list): A field is a column of a table or a view that contains data of a certain type. A field can be assigned an alias in the field list of a SELECT statement, which specifies the fields that are selected from the data source. For example, the following query assigns the alias name to the field carrname of the table scarr:
SELECT carrid, carrname AS name FROM scarr.
The alias name can be used instead of carrname in other clauses of the query, such as WHERE, GROUP BY, ORDER BY, and so on2.
* C. database table: A database table is a collection of data that is organized in rows and columns. A database table can be assigned an alias in the FROM clause of a SELECT statement, which specifies the data source that is selected from. For example, the following query assigns the alias c to the table scarr:
SELECT c.carrid, c.carrname FROM scarr AS c.
The alias c can be used instead of scarr in other clauses of the query, such as WHERE, JOIN, GROUP BY, ORDER BY, and so on3.
The following are not valid for assigning an alias in ABAP SQL:
* A. order criterion (from order by clause): An order criterion is a field or an expression that is used to sort the result set of a query in ascending or descending order. An order criterion cannot be assigned an alias in the ORDER BY clause of a SELECT statement, because the alias is not visible in this clause. The alias can only be used in the clauses that follow the clause where it is defined1.
* D. group criterion (from group by clause): A group criterion is a field or an expression that is used to group the result set of a query into subsets that share the same values. A group criterion cannot be assigned an alias in the GROUP BY clause of a SELECT statement, because the alias is not visible in this clause. The alias can only be used in the clauses that follow the clause where it is defined1.
References: 1: ALIASES - ABAP Keyword Documentation 2: SELECT List - ABAP Keyword Documentation 3: FROM Clause - ABAP Keyword Documentation
NEW QUESTION # 34
/DMO/I_Connection is a CDS view.
What variable type is connection full based on the following code? DATA connection full TYPE
/DMD/I_Connection.
- A. Internal Table
- B. Simple variable
- C. Structure
Answer: C
NEW QUESTION # 35
What would be the correct expression to change a given string value 'mr joe doe' into 'JOE' in an ABAP SQL field list?
- A. SELECT FROM TABLE dbtabl FIELDS
Of1,
substring(upper('mr joe doe'), 4, 3) AS f2_sub_up, f3,... - B. SELECT FROM TABLE dbtabl FIELDS
Of1,
upper(left( 'mr joe doe', 6)) AS f2_up_left, f3, - C. SELECT FROM TABLE dbtabl FIELDS
Of1,
left(lower(substring( 'mr joe doe', 4, 3)), 3) AS f2_left_lo_sub, f3, - D. SELECT FROM TABLE dbtabl FIELDS
Of1,
substring(lower(upper( 'mr joe doe' ) ), 4, 3) AS f2_sub_lo_up, f3,
Answer: A
Explanation:
Explanation
The correct expression to change a given string value 'mr joe doe' into 'JOE' in an ABAP SQL field list is
C). SELECT FROM TABLE dbtabl FIELDS Of1, substring(upper('mr joe doe'), 4, 3) AS f2_sub_up, f3,...
This expression uses the following SQL functions for strings12:
upper: This function converts all lowercase characters in a string to uppercase. For example, upper('mr joe doe') returns 'MR JOE DOE'.
substring: This function returns a substring of a given string starting from a specified position and with a specified length. For example, substring('MR JOE DOE', 4, 3) returns 'JOE'.
AS: This keyword assigns an alias or a temporary name to a field or an expression in the field list. For example, AS f2_sub_up assigns the name f2_sub_up to the expression substring(upper('mr joe doe'), 4, 3).
You cannot do any of the following:
A). SELECT FROM TABLE dbtabl FIELDS Of1, upper(left( 'mr joe doe', 6)) AS f2_up_left, f3,...:
This expression uses the wrong SQL function for strings to get the desired result. The left function returns the leftmost characters of a string with a specified length, ignoring the trailing blanks. For example, left( 'mr joe doe', 6) returns 'mr joe'. Applying the upper function to this result returns 'MR JOE', which is not the same as 'JOE'.
B). SELECT FROM TABLE dbtabl FIELDS Of1, left(lower(substring( 'mr joe doe', 4, 3)), 3) AS f2_left_lo_sub, f3,...: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase. For example, lower(substring( 'mr joe doe', 4, 3)) returns 'joe'. Applying the left function to this result with the same length returns 'joe' again, which is not the same as 'JOE'.
D). SELECT FROM TABLE dbtabl FIELDS Of1, substring(lower(upper( 'mr joe doe' ) ), 4, 3) AS f2_sub_lo_up, f3,...: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase, and the upper function converts all lowercase characters in a string to uppercase. Applying both functions to the same string cancels out the effect of each other and returns the original string. For example, lower(upper( 'mr joe doe' ) ) returns 'mr joe doe'.
Applying the substring function to this result returns 'joe', which is not the same as 'JOE'.
References: 1: SQL Functions for Strings - ABAP Keyword Documentation - SAP Online Help 2: sql_func - String Functions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 36
Refer to the Exhibit.
What are valid statements? Note: There are 2 correct answers to this question.
- A. The code creates an exception object and raises an exception.
- B. "paraml11 and "param2" are predefined names.
- C. "zcxl" is a dictionary structure, and "paraml" and "param2" are this structure.
- D. "previous" expects the reference to a previous exception
Answer: A,D
Explanation:
The code snippet in the image is an example of using the RAISE EXCEPTION statement to raise a class-based exception and create a corresponding exception object. The code snippet also uses the EXPORTING addition to pass parameters to the instance constructor of the exception class12. Some of the valid statements about the code snippet are:
The code creates an exception object and raises an exception: This is true. The RAISE EXCEPTION statement raises the exception linked to the exception class zcxl and generates a corresponding exception object. The exception object contains the information about the exception, such as the message, the source position, and the previous exception12.
"previous" expects the reference to a previous exception: This is true. The previous parameter is a predefined parameter of the instance constructor of the exception class cx_root, which is the root class of all class-based exceptions. The previous parameter expects the reference to a previous exception object that was caught during exception handling. The previous parameter can be used to chain multiple exceptions and preserve the original cause of the exception12.
You cannot do any of the following:
"zcxl" is a dictionary structure, and "paraml" and "param2" are this structure: This is false. zcxl is not a dictionary structure, but a user-defined exception class that inherits from the predefined exception class cx_static_check. param1 and param2 are not components of this structure, but input parameters of the instance constructor of the exception class zcxl. The input parameters can be used to pass additional information to the exception object, such as the values that caused the exception12.
"paraml" and "param2" are predefined names: This is false. param1 and param2 are not predefined names, but user-defined names that can be chosen arbitrarily. However, they must match the names of the input parameters of the instance constructor of the exception class zcxl. The names of the input parameters can be declared in the interface of the exception class using the RAISING addition12.
NEW QUESTION # 37
Which statement can you use to change the contents of a row of data in an internal table?
- A. Update table
- B. Modify table
- C. Append table
- D. Insert table
Answer: B
Explanation:
The statement that can be used to change the contents of a row of data in an internal table is MODIFY table.
The MODIFY table statement can be used to change the contents of one or more rows of an internal table, either by specifying the table index, the table key, or a condition. The MODIFY table statement can also be used to change the contents of a database table, by specifying the table name and a work area or an internal table. The MODIFY table statement can use the TRANSPORTING addition to specify which fields should be changed, and the WHERE addition to specify which rows should be changed.
The other statements are not suitable for changing the contents of a row of data in an internal table, as they have different purposes and effects. These statements are:
* APPEND table: This statement can be used to add a new row of data to the end of an internal table, either by specifying a work area or an inline declaration. The APPEND table statement does not change the existing rows of the internal table, but only increases the number of rows by one.
* INSERT table: This statement can be used to insert a new row of data into an internal table, either by specifying the table index, the table key, or a sorted position. The INSERT table statement does not change the existing rows of the internal table, but only shifts them to make room for the new row. The INSERT table statement can also be used to insert a new row of data into a database table, by specifying the table name and a work area or an inline declaration.
* UPDATE table: This statement can be used to update the contents of a database table, by specifying the table name and a work area or an internal table. The UPDATE table statement can use the SET addition to specify which fields should be updated, and the WHERE addition to specify which rows should be updated. The UPDATE table statement does not affect the internal table, but only the corresponding database table.
References: MODIFY table - ABAP Keyword Documentation, APPEND table - ABAP Keyword Documentation, INSERT table - ABAP Keyword Documentation, UPDATE table - ABAP Keyword Documentation
NEW QUESTION # 38
What are advantages of using a field symbol for internal table row access? Note: There are answers to this question.
- A. Using a field symbol is faster than using a work area.
- B. The row content is copied to the field symbol instead to a work area
- C. A MODIFY statement to write changed contents back to the table is not required.
- D. The field symbol can be reused for other programs.
Answer: A,C
Explanation:
A field symbol is a pointer that allows direct access to a row of an internal table without copying it to a work area. Using a field symbol for internal table row access has some advantages over using a work area, such as12:
* A MODIFY statement to write changed contents back to the table is not required: This is true. When you use a work area, you have to copy the row content from the internal table to the work area, modify it, and then copy it back to the internal table using the MODIFY statement. This can be costly in terms of performance and memory consumption. When you use a field symbol, you can modify the row content directly in the internal table without any copying. Therefore, you do not need the MODIFY statement12.
* Using a field symbol is faster than using a work area: This is true. As explained above, using a field symbol avoids the overhead of copying data between the internal table and the work area. This can improve the performance of the loop considerably, especially for large internal tables. According to some benchmarks, using a field symbol can save 25-40% of the runtime compared to using a work area12.
You cannot do any of the following:
* The field symbol can be reused for other programs: This is false. A field symbol is a local variable that is only visible within the scope of its declaration. It cannot be reused for other programs unless it is declared globally or passed as a parameter. Moreover, a field symbol must have the same type as the line type of the internal table that it accesses. Therefore, it cannot be used for any internal table with a different line type12.
* The row content is copied to the field symbol instead to a work area: This is false. As explained above, using a field symbol does not copy the row content to the field symbol. Instead, the field symbol points to the memory address of the row in the internal table and allows direct access to it. Therefore, there is no copying involved when using a field symbol12.
References: 1: Using Field Symbols to Process Internal Tables - SAP Learning 2: Access to Internal Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 39
Which of the following ABAP SQL statements are valid? Note: There are 2 correct answers to this question.
- A. SELECT FROM /dmo/connection FIELDS V D MAX(distance) AS dist_max
MIN(distance) AS dist_min INTO TABLE @DATA(It_hits). - B. SELECT FROM /dmo/connection FIELDS carrid O airpfrom,
MAX(distance) AS dist_max, MIN( distance) AS dist_min GROUP BY carrid, airpfrom INTO TABLE @DATA(It_hits) - C. SELECT FROM /dmo/connection FIELDS r-i carrid, airpfrom u GROUP BY carrid, connid INTO TABLE @DATA(It_hits).
- D. SELECT FROM /dmo/connection FIELDS \/ O carrid, airpfrom,
MAX( distance) AS dist_max, MIN(distance) AS dist_min INTO TABLE @DATA(It_hits)
Answer: B,D
Explanation:
The following are the explanations for each ABAP SQL statement:
A: This statement is valid. It selects the fields carrid, airpfrom, and the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, and groups the results by carrid and airpfrom. The aggregate functions are aliased as dist_max and dist_min. The results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
B: This statement is valid. It is similar to statement A, except that it does not specify the GROUP BY clause. This means that the aggregate functions are applied to the entire table, and the results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
C: This statement is invalid. It selects the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, but it does not specify any grouping or non-aggregate fields. This is not allowed in ABAP SQL, as the SELECT list must contain at least one non-aggregate field or a GROUP BY clause. The statement will cause a syntax error.
D: This statement is invalid. It selects the fields carrid and airpfrom from the table /dmo/connection, and groups the results by carrid and connid. However, the field connid is not included in the SELECT list, which is not allowed in ABAP SQL, as the GROUP BY clause must contain only fields that are also in the SELECT list. The statement will cause a syntax error.
NEW QUESTION # 40
When processing a loop with the statement DO... ENDDO, what system variable contains the implicit loop counter?
- A. sy-index
- B. sy-linno
- C. sy-labix
- D. sy-subrc
Answer: A
Explanation:
When processing a loop with the statement DO... ENDDO, the system variable that contains the implicit loop counter is sy-index. The loop counter is a numeric value that indicates how many times the loop has been executed. The loop counter is initialized to 1 before the first execution of the loop and is incremented by 1 after each execution. The loop counter can be used to control the number of loop iterations or to access the loop elements by index. The loop counter can also be accessed or modified within the loop body, but this is not recommended as it may cause unexpected results or errors1.
For example, the following code snippet uses the loop counter sy-index to display the numbers from 1 to 10:
DO 10 TIMES. WRITE: / sy-index. ENDDO.
The output of this code is:
1 2 3 4 5 6 7 8 9 10
NEW QUESTION # 41
Which of the following results in faster access to internal tables? Note: There are 3 correct answers to this question.
- A. In a sorted internal table, specifying the primary key completely.
- B. In a hashed internal table, specifying the primary key partially from the left without gaps.
- C. In a sorted internal table, specifying the primary key partially from the left without gaps.
- D. In a standard internal table, specifying the primary key partially from the left without gaps.
- E. In a hashed internal table, specifying the primary key completely.
Answer: A,B,E
Explanation:
The access to internal tables can be optimized by using the appropriate table type and specifying the table key.
The table key is a set of fields that uniquely identifies a row in the table and determines the sorting order of the table. The table key can be either the primary key or a secondary key. The primary key is defined by the table type and the table definition, while the secondary key is defined by the user using the KEY statement1.
The following results in faster access to internal tables:
* B. In a sorted internal table, specifying the primary key completely. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row. However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps2.
* D. In a hashed internal table, specifying the primary key partially from the left without gaps. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified partially from the left without gaps, meaning that some of the fields of the primary key can be omitted, as long as they are the rightmost fields and there are no gaps between the specified fields.
* E. In a hashed internal table, specifying the primary key completely. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified completely, meaning that all the fields of the primary key must be given in the correct order.
The following do not result in faster access to internal tables, because:
* A. In a sorted internal table, specifying the primary key partially from the left without gaps. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row.
However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps. If the primary key is specified partially from the left without gaps, the system cannot use the binary search algorithm and has to perform a linear search, which is slower2.
* C. In a standard internal table, specifying the primary key partially from the left without gaps. A standard internal table is a table type that does not have a predefined sorting order, but uses a sequential storage and access of the rows. The primary key of a standard internal table is the standard key, which consists of all the fields of the table row in the order in which they are defined. A standard internal table can be accessed using the primary key or the table index. The access using the primary key is slower than the access using the table index, because the system has to perform a linear search to find the row.
The primary key can be specified partially from the left without gaps, but this does not improve the access speed, because the system still has to perform a linear search.
References: 1: Internal Tables - Overview - ABAP Keyword Documentation 2: Sorted Tables - ABAP Keyword Documentation : Hashed Tables - ABAP Keyword Documentation : Standard Tables - ABAP Keyword Documentation
NEW QUESTION # 42 
To adhere to the most recent ABAP SQL syntax conventions from SAP, on which line must you insert the
"INTO TABLE @gt flights" clause to complete the SQL statement?
- A. #15
- B. #8
- C. #6
- D. #4
Answer: D
Explanation:
Explanation
To adhere to the most recent ABAP SQL syntax conventions from SAP, you must insert the "INTO TABLE
@gt flights" clause on line #4 to complete the SQL statement. This is because the INTO or APPENDING clause should be specified immediately after the SELECT clause, according to the ABAP SQL syntax conventions1. The INTO or APPENDING clause defines the data object to which the results set of the SELECT statement is assigned. The data object can be an internal table, a work area, or an inline declaration.
In this case, the data object is an internal table named gt_flights, which is created using the inline declaration operator @DATA. The inline declaration operator allows you to declare and create a data object in the same statement where it is used, without the need for a separate DATA statement2.
The other lines are not suitable for inserting the "INTO TABLE @gt flights" clause, as they would violate the ABAP SQL syntax conventions or cause syntax errors. These lines are:
#6: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would cause a syntax error. This is because the FROM clause must be specified before the INTO or APPENDING clause, according to the ABAP SQL syntax conventions1. The FROM clause defines the data sources from which the data is read, such as database tables, CDS view entities, or CDS DDIC-based views. In this case, the data source is the database table flights.
#8: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would cause a syntax error. This is because the ORDER BY clause must be specified after the INTO or APPENDING clause, according to the ABAP SQL syntax conventions1. The ORDER BY clause defines the sort order of the results set of the SELECT statement. In this case, the results set is sorted by the fields carrid, connid, and fltime.
#15: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would violate the ABAP SQL syntax conventions. This is because the INTO or APPENDING clause should be specified as close as possible to the SELECT clause, according to the ABAP SQL syntax conventions1. The INTO or APPENDING clause should not be separated from the SELECT clause by other clauses, such as the WHERE clause, the GROUP BY clause, the HAVING clause, the UNION clause, or the ORDER BY clause. This is to improve the readability and maintainability of the ABAP SQL statement.
References: SELECT - ABAP Keyword Documentation, Inline Declarations - ABAP Keyword Documentation
NEW QUESTION # 43 
with which predicate condition can you ensure that the CAST will work?
- A. IS INSTANCE OF
- B. IS BOUND
- C. IS NOT INITIAL
- D. IS SUPPLIED
Answer: A
Explanation:
The predicate condition that can be used to ensure that the CAST will work is IS INSTANCE OF. The IS INSTANCE OF predicate condition checks whether the operand is an instance of the specified class or interface. This is useful when you want to perform a downcast, which is a conversion from a more general type to a more specific type. A downcast can fail if the operand is not an instance of the target type, and this can cause a runtime error. Therefore, you can use the IS INSTANCE OF predicate condition to check whether the downcast is possible before using the CAST operator12. For example:
* The following code snippet uses the IS INSTANCE OF predicate condition to check whether the variable g_super is an instance of the class lcl_super. If it is, the CAST will work and the variable g_sub1 will be assigned the value of g_super.
DATA: g_super TYPE REF TO lcl_super, g_sub1 TYPE REF TO lcl_sub1. IF g_super IS INSTANCE OF lcl_super. g_sub1 = CAST #( g_super ). g_sub1->method( ... ). ENDIF.
You cannot do any of the following:
* IS SUPPLIED: The IS SUPPLIED predicate condition checks whether an optional parameter of a method or a function module has been supplied by the caller. This is useful when you want to handle different cases depending on whether the parameter has a value or not. However, this predicate condition has nothing to do with the CAST operator or the type of the operand12.
* IS NOT INITIAL: The IS NOT INITIAL predicate condition checks whether the operand has a non-initial value. This is useful when you want to check whether the operand has been assigned a value or not. However, this predicate condition does not guarantee that the CAST will work, because the operand may have a value but not be an instance of the target type12.
* IS BOUND: The IS BOUND predicate condition checks whether the operand is a bound reference variable. This is useful when you want to check whether the operand points to an existing object or not. However, this predicate condition does not guarantee that the CAST will work, because the operand may point to an object but not be an instance of the target type12.
References: 1: Predicate Expressions - ABAP Keyword Documentation - SAP Online Help 2: ABAP - Predicates | SAP Community
NEW QUESTION # 44
......
SAP C-ABAPD-2309 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
C-ABAPD-2309 Exam PDF [2025] Tests Free Updated Today with Correct 83 Questions: https://www.guidetorrent.com/C-ABAPD-2309-pdf-free-download.html
SAP C-ABAPD-2309 Exam Preparation Guide and PDF Download: https://drive.google.com/open?id=1Cuw_lxoSL8RmzkR97L8ACrOwKPovfqlV