[Jan 19, 2022] Ultimate NS0-516 Guide to Prepare Free Latest Network Appliance Practice Tests Dumps
Get Top-Rated Network Appliance NS0-516 Exam Dumps Now
NEW QUESTION 77
Identify this image.
- A. E2700 controller
- B. DE6600 ESM
- C. E5600 controller
- D. DE5612 ESM
Answer: C
NEW QUESTION 78
Exhibit:
A customer's host is running a Red Hat Enterprise Linux 7.6 server with dm-mp configured for ALUA and is connected to a single volume on the EF280 system that is shown in the exhibit.
In this scenario, how many active/optimized paths are available to the volume?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 79
What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)
- A. SAS
- B. FC
- C. IB
- D. iSCSI
Answer: B,D
NEW QUESTION 80
What should you do to confirm a component failure prior to replacing hardware? (Choose the best answer.)
- A. Power cycle the storage array
- B. Run the Recovery Guru
- C. Run chkdsk on the client
- D. Check the Major Events Log
Answer: B
NEW QUESTION 81
What is a best practice recommendation for the automated system monitor? (Choose the best answer.)
- A. It should be stopped during a controller firmware upgrade.
- B. It should only be run on Windows server systems.
- C. It should run on all storage manager clients.
- D. It should be stopped during storage system normal operations.
- E. It should only run on one client connected to the storage system.
Answer: A
NEW QUESTION 82
Schedules for AutoSupport's periodic collection of data can be changed in the ________. (Choose the best answer.)
- A. Major Event Log
- B. NVSRAM
- C. Enterprise Management Window
- D. Array Management Window
Answer: C
NEW QUESTION 83
What is the maximum number of FC host interface cards used per NetApp EF600 storage array?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 84
How many partitions are being used in this storage system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 85
In SANtricity System Manager, the Recovery Guru reports a loss of paths to an iSCSI host.
In this scenario, which tool would you use to troubleshoot this issue?
- A. Device Manager
- B. telnet
- C. PuTTY
- D. ping
Answer: D
NEW QUESTION 86
A company has just installed a NetApp EF600 storage array with an initial drive count of 12. A disk pool is created using all 12 disks. Benchmark testing now shows that system performance is far less than expected. Metrics show a very unbalanced use of the two PcIe busses and drives.
In this scenario, which action addresses this problem?
- A. Insert six drives into the first 12 slots and six drives into the last 12 slots.
- B. Adjust cache block sizes to 8k.
- C. Build two equally sized pools during disk pool creation.
- D. Dynamically convert the volumes from RAID 10 to RAID 5.
Answer: A
NEW QUESTION 87
The system automatically disables write caching when _________. (Choose the best answer.)
- A. the system detects a small percentage of cache hits over a 10-minute timeframe
- B. there is a failed controller on the system, so that cache mirroring is unavailable
- C. a disk pool is being expanded by adding a drive
- D. a failed disk drive has put a volume group into a degraded state
- E. more than 4 unique host identifiers are trying to access the same volume
Answer: D
NEW QUESTION 88
Which two local users of NetApp SANtricity Unified Manager would be used to edit the Certificate Management section? (Choose two.)
- A. support
- B. admin
- C. security
- D. storage
Answer: A,C
NEW QUESTION 89
Exhibit:
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 90
What is represented by the Headroom graph on the SANtricity System Manager performance tab?
- A. the remaining performance capability of the physical objects in the storage system
- B. the resources that are being consumed by a defined workload
- C. the percentage of I/O associated with the backend disk drives
- D. the percentage of CPU processing capacity that is being used by the operations on the system
Answer: A
NEW QUESTION 91
Exhibit:
Referring to the exhibit, a customer needs to verify the power draw for the uninterruptible power supply (UPS) that is supporting ten E2824 shelves in a cabinet connected to a 100/110 volts power source.
What is the power draw in amps for the UPS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 92
Which storage manager feature scans the system for issues, reports them, and suggests procedures that will correct the issue?
- A. Event Log
- B. Storage array diagnostics
- C. Recovery guru
- D. Diagmon
- E. Performance monitor
Answer: A
NEW QUESTION 93
......
NetApp NS0-516 Exam Certification Details:
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Duration | 90 minutes |
| Passing Score | 75% |
| Exam Registration | PEARSON VUE |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Price | $150 USD |
| Number of Questions | 60 |
Passing Key To Getting NS0-516 Certified Exam Engine PDF: https://www.guidetorrent.com/NS0-516-pdf-free-download.html
NS0-516 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1W2DxpJa1w8bBtoPIg-Brphhn1e-tdQtV