Get Started: NS0-162 Exam [2021] Dumps Network Appliance PDF Questions
NS0-162 Premium Exam Engine pdf Download
Network Appliance NS0-162 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 11
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?
- A. IPspaces
- B. broadcast domains
- C. ONTAP subnets
- D. VLANs
Answer: B
NEW QUESTION 12
Exhibit.
You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?
- A. 00:a0:98:fl:2e:b2
- B. 02:a0:98:fl:2e:be
- C. 00:a0:98:fl:2e:b3
- D. 02:a0:98:fl:21:88
Answer: C
NEW QUESTION 13
Exhibit.
Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?
- A. FC has not been licensed on the cluster.
- B. NVMe is not licensed on the cluster.
- C. FC switch zoning has not been done correctly.
- D. NVMe Is not configured for the SVM.
Answer: D
NEW QUESTION 14
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Set a password for (the vsadmin user account.
- B. Create the vsadmin user account in the new SVM.
- C. Create a LIF for SVM management.
- D. Configure role-based access control (RBAC) for the vsadmin user account.
Answer: A,B
NEW QUESTION 15
Click the Exhibit button.
You have an ONTAP cluster that is running a FlexGroup that is serving SMB data out to various users. One of the users receives an error when trying to modify an existing file.
What is the cause of the problem?
- A. The FlexGroup is full
- B. The FlexGroup is offline
- C. The constituent is full
- D. The aggregate is full
Answer: C
NEW QUESTION 16
You want to enable a management LIF to restrict NTP to the 192.168.1.0/24 subnet.
In this scenario, which two actions are required to accomplish this task? (Choose two.)
- A. Create a firewall policy.
- B. Assign a policy to the NTP server.
- C. Assign a policy to the management LIF.
- D. Create a failover policy.
Answer: A,C
NEW QUESTION 17
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the failover-policy option
- B. the subnet-name option
- C. the auto-revert option
- D. the data-protocol option
Answer: D
NEW QUESTION 18
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task?
(Choose three.)
- A. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
- B. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- C. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
- D. Enable jumbo frames with an MTU of 9216 for your switches.
- E. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
Answer: A,D,E
NEW QUESTION 19
Your ONTAP cluster serves data and backup traffic running on the same physical port. You must isolate backup traffic from your production network traffic.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Create a VLAN.
- B. Create a namespace.
- C. Create IPspaces.
- D. Create a broadcast domain.
Answer: A,D
NEW QUESTION 20
Which security method would be used to authenticate targets and Initiators In an ISCSI environment?
- A. CHAP
- B. LDAP
- C. NIS
- D. /etc/hosts
Answer: A
NEW QUESTION 21
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover. In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
- A. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.
- B. Use ONTAP Select Deploy to Install the nodes on the physical hardware.
- C. Install the SnapMirror Sync license on the cluster.
- D. Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.
Answer: A,B
NEW QUESTION 22
You are asked by your network engineering team to make sure that your NetApp cluster Is configured to run LACP on Its network ports. Which network component satisfies this request?
- A. failover group
- B. VLAN
- C. broadcast domain
- D. Interface group
Answer: C
NEW QUESTION 23
You have a remote FlexCache storage device that is running on ONTAP Select 9.8 software. The cache origin volume Is on an FAS8700 that is running ONTAP 9.8 software. The WAN connection dropped, and the FlexCache volume is in disconnected mode.
In this scenario, which LIFs would you ping to troubleshoot the disconnect?
- A. cluster
- B. management
- C. data
- D. Intercluster
Answer: A
NEW QUESTION 24
Your company requires that all data must be encrypted inflight to prevent data from falling into the wrong hands.
What are two ways to accomplish this task? (Choose two.)
- A. Ensure that all inter cluster replication traffic is done through a VPN tunnel.
- B. Enable Multi-Factor Authentication (MFA) for your Snap Mirror relationships.
- C. Modify your cluster peering relationships to support cluster peering encryption.
- D. Ensure that Snap Mirror compression is enabled in all Snap Mirror relationships.
Answer: A,C
NEW QUESTION 25
Which SVM subtype is used by an SVM-DR target?
- A. default
- B. dp-destination
- C. sync-source
- D. data
Answer: B
NEW QUESTION 26
Click the Exhibit button.
You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multi chassis Ether-channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. 10 GbE ports are not supported with the AFF A220.
- B. ONTAP does not have a multi chassis Ether-channel feature.
- C. The storage cabling to the switches is incorrect.
- D. The network team forgot to verify the port channel members.
Answer: B,C
NEW QUESTION 27
You currently have a Cloud Volumes ONTAP instance running and need to have read/write access to a volume on an on-premises ONTAP cluster.
In this scenario, which feature do you use?
- A. FlexCache
- B. Flash Pool
- C. SnapMirror
- D. Flash Cache
Answer: C
NEW QUESTION 28
Exhibit.
You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?
- A. 00:a0:98:fl:2e:b2
- B. 02:a0:98:fl:2e:be
- C. 00:a0:98:fl:2e:b3
- D. 02:a0:98:fl:21:88
Answer: C
NEW QUESTION 29
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. SnapCenter Plug-in for VMware vSphere
- B. Virtual Storage Console (VSC)
- C. SAN Host Utilities
- D. SnapManager
Answer: C
NEW QUESTION 30
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.
In this scenario, which action solves the problem?
- A. Use an Ethernet switch between storage and host.
- B. Use an FC switch between storage and host.
- C. Use the point-to-point topology on all ports.
- D. Use the arbitrated loop topology on storage and host.
Answer: D
NEW QUESTION 31
Which two SVM types does a cluster contain after cluster creation? (Choose two.)
- A. peer
- B. dp-destination
- C. data
- D. admin
Answer: C,D
NEW QUESTION 32
......
NetApp NS0-162 Exam Certification Details:
| Recommended Training | ONTAP Cluster Fundamentals (WBT) ONTAP Cluster Administration (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Number of Questions | 60 |
| Passing Score | 64% |
| Exam Registration | PEARSON VUE |
| Exam Price | $150 USD |
| Duration | 90 minutes |
| Sample Questions | NetApp NS0-162 Sample Questions |
| Exam Name | Data Administrator ONTAP |
| Exam Code | NS0-162 NCDA ONTAP |
Pass Your Network Appliance Exam with NS0-162 Exam Dumps: https://www.guidetorrent.com/NS0-162-pdf-free-download.html
Verified NS0-162 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1eB2h3FmWRulFLqUZKdNhRgq2VEfACqIK