[Feb 13, 2022] Download Free Cisco 352-001 Real Exam Questions
Pass Your Exam With 100% Verified 352-001 Exam Questions
Who should take the 352-001 exam
CCDE Design Written 352-001 Exam certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled as a CCDE Design. If a candidate wants significant improvement in career growth needs enhanced knowledge, skills, and talents. The CCDE Design Written 352-001 Exam certification provides proof of this advanced knowledge and skill. If a candidate has knowledge of associated technologies and skills that are required to pass CCDE Design Written 352-001 Exam then he should take this exam.
How to study the 352-001 Exam
GuideTorrent expert team recommends you to prepare some notes on these topics along with it don't forget to practice Cisco 352-001 Exam exam dumps which been written by our expert team, Both these will help you a lot to clear this exam with good marks.
How to book the 352-001 Exam
These are following steps for registering the 352-001 exam. Step 1: Visit to Pearson VUE Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Cisco 352-001 Certifications Exam Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 111
You work for a large company that has just acquired another smaller company. You have been asked to lead a group of SAN experts from both companies to design the integration plan that will be used to interconnect the SANs and migrate the data from the newly acquired company to the main storage arrays. The first thing that the team discovers is that the two SANs have the same domain IDs.
As the SAN team lead, what would you advise your team to do so that you can interconnect the two SANs while minimizing disruption?
- A. Use IVR NAT with a transit VSAN between the SANs.
- B. Use FCIP with Write Acceleration and IVR version 1 with a transit VSAN to expedite the data transfer between the two SANs.
- C. The two SANs cannot be merged without disruption.
- D. Change the domain IDs on both SANs so that they are both unique and then connect
ISLs between the SANs.
Answer: A
NEW QUESTION 112
A network design includes a long signaling delay in notifying the Layer 3 control plane that an interface has failed. Which two of these actions would reduce that delay? (Choose two.)
- A. Reduce the time for the network to reconverge.
- B. Increase network stability.
- C. Enable lower data link layer recovery systems to have an opportunity to restore the interface.
- D. Increase the notification of interface flaps.
Answer: A,C
NEW QUESTION 113
The IGP next-hop reachability for a BGP route is lost but a default route is available.
Assuming that BGP connectivity is maintained, what will happen to the BGP route?
- A. It will be considered invalid for traffic forwarding.
- B. It will be removed from the BGP table.
- C. It will be put in a hold-down state by BGP until the next hop has been updated.
- D. It will be considered a valid route.
Answer: D
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 114
During a network design review, it is recommended that the network with a single large area should be broken up into a backbone and multiple nonbackbone areas. There are differing opinions on how many ABRs are needed for each area for redundancy. What would be the impact of having additional ABRs per area?
- A. The size of the FIB is increased.
- B. There is no impact to increasing the number of ABRs.
- C. The SPF calculations are more complex.
- D. The number of externals and network summaries are increased.
Answer: D
Explanation:
Explanation/Reference:
answer is corrected.
NEW QUESTION 115
A Service Provider is designing a solution for a managed CE service to a number of local customers using a single CE platform and wants to have logical separation on the CE platform using Virtual Routing and Forwarding (VRF) based on IP address ranges or packet length. Which is the most scalable solution to provide this type of VRF Selection process on the CE edge device?
- A. Policy Based Routing
- B. OSPF per VRF Instance
- C. Static Routes for Route Leaking
- D. Multi-Protocol BGP
Answer: A
NEW QUESTION 116
Refer to the exhibit.
How would you redesign the network to improve availability of the routers 1A and 1B at the core site?
- A. Create a multichassis system with the two routers
- B. Use link bundles over multiple slots
- C. Enable Graceful Restart Helper for OSPF
- D. Use APS Ethernet circuits and redundant interfaces
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 117
A service provider wants to use a controller to automate the provisioning of service function chaining. Which two overlay technologies can be used with EVPN MP-BGP to create the service chains in the data center?
- A. VXLAN
- B. MPLS L2VPN
- C. 802.1Q
- D. Provider Backbone Bridging EVPN
Answer: A
NEW QUESTION 118
Which solution provides an active/active alternative to spanning-tree?
- A. TRILL
- B. Ethernet Ring Protection Switching
- C. RSTP
- D. MST
Answer: A
NEW QUESTION 119
Refer to the exhibit.
How would you redesign the network to improve availability of the routers 1A and 1B at the core site?
- A. Create a multichassis system with the two routers
- B. Use link bundles over multiple slots
- C. Enable Graceful Restart Helper for OSPF
- D. Use APS Ethernet circuits and redundant interfaces
Answer: A
NEW QUESTION 120
Which two benefits does using virtual PortChannel technology provide? (Choose two).
- A. vPC allows a dual-homed server to operate in active-standby mode.
- B. vPC uses all uplink bandwidth.
- C. vPC significantly reduces latency.
- D. vPC eliminates spanning-tree blocked ports.
- E. vPC supports VLAN-based load balancing.
Answer: B,D
NEW QUESTION 121
Enterprises A and B agree to merge, but keep IGP and BGP independent of each other.
They are served by a common ISP for their Internet connectivity. During the merge, A and
B will provision a point-to-point link between the two networks. What is the simplest design option that will allow data to travel between A and B without passing through the ISP?
- A. configure OSPF between the two networks and block each others route's from the ISP
- B. configure OSPF and make OSPF routes more attractive than the same routes learned via EBGP from the ISP
- C. configure iBGP between the two networks and block each others route's from the ISP
- D. configure OSPF and make OSPF routes less attractive than the same routes learned via
EBGP from the ISP - E. configure EBGP between the two networks and block each other's routes from the ISP
Answer: E
NEW QUESTION 122
You are designing a data center migration from one location to another, which requires all existing VLANs spanned to the new data center to maintain host IP addressing. Two temporary Gigabit Ethernet circuits are available to extend the VLANs at Layer 2 to the location as trunk links between core switches in each location. Which solution provides maximum fault isolation between the two data centers to ensure a Layer Issue in one data center does not affect the other during the migration?
- A. Perform BPDU filtering over the trunk links
- B. Enable STP PortFast on host ports within each data center
- C. Perform HSRP filtering over the trunk links to maintain active HSRP gateways within each data center for each VLAN
- D. Run the dual links as multichassis Etherchannel trunk between core switches within each location
Answer: A
NEW QUESTION 123
Refer to the exhibit.
Assume that no multicast optimization is done on LAN switches A and
- A. Which feature can be used to optimize multicast traffic forwarding in this situation?
- B. Enable IGMP snooping querier on both switches.
- C. Disable IGMP snooping on both switches.
- D. Enable PIM Snooping on both switches.
- E. Configure a static MAC entry for the multicast server.
- F. Disable the IGMP query election process.
Answer: A
NEW QUESTION 124
Your enterprise customer has asked where they should deploy flow monitoring in their network to monitor traffic between branch offices. What is your design recommendation?
- A. at the edge of the network so that user traffic will be seen
- B. at the central site, because all traffic from the remotes will be seen there.
- C. in the core, because all traffic will be seen there
- D. in the data center, because all user traffic will be seen there
Answer: B
NEW QUESTION 125
Refer to the exhibit.
Which two Layer 2 features should be applied to the network location identified by a circle?
(Choose two)
- A. UDLC
- B. PortFast trunk
- C. loop guard
- D. BPDU guard
- E. BPDU filter
- F. PortFast
Answer: D,F
NEW QUESTION 126
......
352-001 Dumps 100 Pass Guarantee With Latest Demo: https://www.guidetorrent.com/352-001-pdf-free-download.html