[Dec-2023] Verified Network Appliance Exam Dumps with NS0-184 Exam Study Guide
Best Quality Network Appliance NS0-184 Exam Questions GuideTorrent Realistic Practice Exams [2023]
NEW QUESTION # 31
You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.
How do you verify your configuration?
- A. Use the storage show disk -p command.
- B. Use the storage disk option show command.
- C. Use the disk show -fields initiator command.
- D. Use the sysconfig command.
Answer: C
NEW QUESTION # 32
Click the Exhibit button.
What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)
- A. to enable SyncMirror replication
- B. to provide connectivity for NVRAM over iWARP
- C. to provide a direct connection for the SnapMirror Synchronous (SM-S)
- D. to install cross-site cluster management switches
Answer: B,C
NEW QUESTION # 33
You are using Broadcom BES-53248 switches for a cluster interconnect in a base configuration.
In this scenario, what is the minimum number of ISLs supported between the switches?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 34
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. BGP
- B. EMS
- C. AutoSupport
- D. SNMP
Answer: B
NEW QUESTION # 35
Click the Exhibit button.
You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in the exhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)
- A. 2 paths up, 0 paths down (TCP check)
- B. 2 paths up, 0 paths down (UDP check)
- C. basic connectivity succeeds on 4 path(s)
- D. larger than PMTU communication succeeds on 4 path(s)
Answer: A,C
NEW QUESTION # 36
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?
- A. IQNs
- B. host names
- C. WWNNs
- D. WWPNs
Answer: B
NEW QUESTION # 37
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?
- A. Install the CSHM configuration file.
- B. Install the license file.
- C. Install the reference configuration file.
- D. Reboot the controllers.
Answer: C
NEW QUESTION # 38
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. registering for access to the NetApp Support site
- B. performing database application data migrations
- C. logging the customer support calls
- D. accessing internal NetApp KB articles
Answer: A,B
NEW QUESTION # 39
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. admin SVM
- B. system SVM
- C. node SVM
- D. data SVM
Answer: A,B
NEW QUESTION # 40
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?
- A. Active IQ Unified Manager
- B. Cloud Manager
- C. Active IQ Config Advisor
- D. ONTAP System Manager
Answer: D
NEW QUESTION # 41
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
- A. node-mgmt
- B. data
- C. intercluster
- D. cluster-mgmt
Answer: C
NEW QUESTION # 42
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. EMS messages
- C. AutoSupport messages
- D. SNMP traps
Answer: A,C
NEW QUESTION # 43
While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.
In this scenario, what are two causes of this problem? (Choose two.)
- A. The cluster management LIF needs to be in a different IPspace.
- B. A firewall is blocking port 123.
- C. The admin SVM has the wrong gateway.
- D. The time skew is too great.
Answer: A,C
NEW QUESTION # 44
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
- A. Add the shelf to the existing stack.
- B. License NSE and add the shelf to this HA pair as a new stack.
- C. Connect the shelf to an HA pair with NSE drives.
- D. Create a new stack on the HA pair to add the shelf.
Answer: A
NEW QUESTION # 45
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0M
- B. e0M-11
- C. e0a-11
- D. e0b-11
Answer: A,B
NEW QUESTION # 46
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. iSCSI
- B. CIFS
- C. NVMe
- D. FCP
Answer: B,D
NEW QUESTION # 47
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?
- A. Peering authentication can use an ONTAP generated passphrase.
- B. Peering authentication is required before enabling peering encryption.
- C. Peering authentication can be configured using LDAP users and groups.
- D. Peering authentication status can be verified with the cluster peer show command.
Answer: A,D
NEW QUESTION # 48
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Active IQ System Manager
- B. Interoperability Matrix Tool
- C. Active IQ Config Advisor
- D. Hardware Universe
Answer: B,C
NEW QUESTION # 49
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. SFP+ port
- B. serial port
- C. SSH
- D. rlogin
Answer: B,C
NEW QUESTION # 50
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
- A. node
- B. storage VM
- C. switch
- D. cluster
Answer: B,D
NEW QUESTION # 51
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on an FC or FCoE port
- B. on a UTA port shared with other LIFs
- C. on a physical port
- D. on an interface group
Answer: D
NEW QUESTION # 52
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 0
- B. 1
- C. 01
- D. 00
Answer: D
NEW QUESTION # 53
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Relocate the switches or the AFF A400 so that the distance is less than five meters.
- B. Install 10 meter NetApp supported copper cables.
- C. Change the requirement for optical cables.
- D. Change the requirement for Ethernet cables.
Answer: B,D
NEW QUESTION # 54
......
Authentic Best resources for NS0-184: https://www.guidetorrent.com/NS0-184-pdf-free-download.html
NS0-184 Test Engine Practice Exam: https://drive.google.com/open?id=1U144lkXUR0oU0Pge4y2KTRQqwYszBWkO