Brilliant NSE4_FGT-7.2 Exam Dumps Get NSE4_FGT-7.2 Dumps PDF
NSE4_FGT-7.2 Dumps PDF - NSE4_FGT-7.2 Real Exam Questions Answers
NEW QUESTION # 13
An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?
- A. It uses DNS overTLS.
- B. It uses DNS over HTTPS.
- C. It uses UDP 53.
- D. It uses UDP 8888.
Answer: C
NEW QUESTION # 14
An administrator wants to configure timeouts for users. Regardless of the userTMs behavior, the timer should start as soon as the user authenticates and expire after the configured value.
Which timeout option should be configured on FortiGate?
- A. auth-on-demand
- B. soft-timeout
- C. new-session
- D. idle-timeout
- E. hard-timeout
Answer: E
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Explanation-of-auth-timeout-types-for-Firewall/ta-p/189423 Reference:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD37221#:~:text=Hard%20timeout%3A%20User%20
NEW QUESTION # 15
Which three statements explain a flow-based antivirus profile? (Choose three.)
- A. The IPS engine handles the process as a standalone.
- B. FortiGate buffers the whole file but transmits to the client at the same time.
- C. Flow-based inspection optimizes performance compared to proxy-based inspection.
- D. If a virus is detected, the last packet is delivered to the client.
- E. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.
Answer: B,C,E
NEW QUESTION # 16
In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration? (Choose three.)
- A. The IP version of the sources and destinations in a firewall policy must be different.
- B. The IP version of the sources and destinations in a policy must match.
- C. The Incoming Interface. Outgoing Interface. Schedule, and Service fields can be shared with both IPv4 and IPv6.
- D. The policy table in the GUI can be filtered to display policies with IPv4, IPv6 or IPv4 and IPv6 sources and destinations.
- E. The policy table in the GUI will be consolidated to display policies with IPv4 and IPv6 sources and destinations.
Answer: B,C,E
NEW QUESTION # 17
What are two benefits of flow-based inspection compared to proxy-based inspection? (Choose two.)
- A. FortiGate allocates two sessions per connection.
- B. FortiGate adds less latency to traffic.
- C. FortiGate uses fewer resources.
- D. FortiGate performs a more exhaustive inspection on traffic.
Answer: B,C
Explanation:
Reference:
Flow-based inspection is a type of traffic inspection that is used by some firewall devices, including FortiGate, to analyze network traffic. It is designed to be more efficient and less resource-intensive than proxy-based inspection, and it offers several benefits over this approach.
Two benefits of flow-based inspection compared to proxy-based inspection are:
FortiGate uses fewer resources: Flow-based inspection uses fewer resources than proxy-based inspection, which can help to improve the performance of the firewall device and reduce the impact on overall system performance.
FortiGate adds less latency to traffic: Flow-based inspection adds less latency to traffic than proxy-based inspection, which can be important for real-time applications or other types of traffic that require low latency.
NEW QUESTION # 18
Which three options are the remote log storage options you can configure on FortiGate? (Choose three.)
- A. FortiAnalyzer
- B. FortiSandbox
- C. FortiCache
- D. FortiSIEM
- E. FortiCloud
Answer: A,D,E
NEW QUESTION # 19
Refer to the exhibits.
Exhibit A shows a network diagram. Exhibit B shows the firewall policy configuration and a VIP object configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
If the host 10.200.3.1 sends a TCP SYN packet on port 10443 to 10.200.1.10, what will the source address, destination address, and destination port of the packet be, after FortiGate forwards the packet to the destination?
- A. 10.0.1.254, 10.0.1.10, and 10443, respectively
- B. 10.0.1.254, 10.0.1.10, and 443, respectively
- C. 10.200.3.1, 10.0.1.10, and 443, respectively
Answer: C
NEW QUESTION # 20
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. Read/Write permission for Log & Report
- B. Custom permission for Network
- C. CLI diagnostics commands permission
- D. Read/Write permission for Firewall
Answer: C
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION # 21
What are two functions of ZTNA? (Choose two.)
- A. ZTNA provides a security posture check.
- B. ZTNA manages access for remote users only.
- C. ZTNA manages access through the client only.
- D. ZTNA provides role-based access.
Answer: A,D
NEW QUESTION # 22
FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax.
Which two syntaxes are correct to configure web rating for the home page? (Choose two.)
- A. www.example.com:443
- B. www.example.com/index.html
- C. example.com
- D. www.example.com
Answer: C,D
Explanation:
Explanation
When using FortiGuard category filtering to allow or block access to a website, one option is to make a web rating override and define the website in a different category. Web ratings are only for host names - no URLs or wildcard characters are allowed.
OK: google.com or www.google.com
NO OK: www.google.com/index.html or google.*
FortiGate_Security_6.4 page 384
When using FortiGuard category filtering to allow or block access to a website, one option is to make a web rating override and define the website in a different category. Web ratings are only for host names-- "no URLs or wildcard characters are allowed".
NEW QUESTION # 23
Refer to the exhibits.
Exhibit A.
Exhibit B.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?
- A. Change the csf setting on Local-FortiGate (root) to set configuration-sync local.
- B. Change the csf setting on ISFW (downstream) to set fabric-object-unification default.
- C. Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.
- D. Change the csf setting on ISFW (downstream) to set configuration-sync local.
Answer: C
NEW QUESTION # 24
Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster? (Choose two.)
- A. DNS
- B. NTP
- C. FortiGate hostname
- D. FortiGuard web filter cache
Answer: A,B
Explanation:
In the 7.2 Infrastructure Guide (page 306) the list of configuration settings that are NOT synchronized includes both 'FortiGate host name' and 'Cache'
NEW QUESTION # 25
Examine this output from a debug flow:
Why did the FortiGate drop the packet?
- A. It matched an explicitly configured firewall policy with the action DENY.
- B. The next-hop IP address is unreachable.
- C. It failed the RPF check .
- D. It matched the default implicit firewall policy.
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=13900
https://www.fortinetguru.com/2016/03/what-is-policy-id-0-and-why-lot-of-denied-traffic-on-this-policy/
NEW QUESTION # 26
Refer to the exhibit.
The exhibit contains a network diagram, central SNAT policy, and IP pool configuration.
The WAN (port1) interface has the IP address 10.200. 1. 1/24.
The LAN (port3) interface has the IP address 10.0. 1.254/24.
A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied.
Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0. 1. 10) pings the IP address of Remote-FortiGate (10.200.3. 1)?
- A. 10.200. 1. 149
- B. 10.200. 1. 1
- C. 10.200. 1.49
- D. 10.200. 1.99
Answer: D
NEW QUESTION # 27
Which statements best describe auto discovery VPN (ADVPN). (Choose two.)
- A. ADVPN is only supported with IKEv2.
- B. Tunnels are negotiated dynamically between spokes.
- C. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.
- D. It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes.
Answer: B,D
NEW QUESTION # 28
Which certificate value can FortiGate use to determine the relationship between the issuer and the certificate?
- A. Subject Key Identifier value
- B. Subject value
- C. Subject Alternative Name value
- D. SMMIE Capabilities value
Answer: A
NEW QUESTION # 29
Refer to the exhibits.
The exhibits show the firewall policies and the objects used in the firewall policies.
The administrator is using the Policy Lookup feature and has entered the search criteria shown in the exhibit.
Which policy will be highlighted, based on the input criteria?
- A. Policy with ID 5.
- B. Policy with ID 4.
- C. Policies with ID 2 and 3.
- D. Policy with ID 4.
Answer: A
NEW QUESTION # 30
Which statement describes a characteristic of automation stitches?
- A. They can be run only on devices in the Security Fabric.
- B. They can run multiple actions simultaneously.
- C. They can be created on any device in the fabric.
- D. They can have one or more triggers.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/351998/creating-automation-stitches
NEW QUESTION # 31
Refer to the FortiGuard connection debug output.
Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
- A. FortiGate is using default FortiGuard communication settings.
- B. There is at least one server that lost packets consecutively.
- C. A local FortiManager is one of the servers FortiGate communicates with.
- D. One server was contacted to retrieve the contract information.
Answer: A,D
NEW QUESTION # 32
......
Fortinet NSE4_FGT-7.2 (Fortinet NSE 4 - FortiOS 7.2) exam is designed to measure an individual's knowledge and skills in configuring, managing, and maintaining Fortinet security solutions using FortiOS 7.2. Fortinet NSE 4 - FortiOS 7.2 certification is ideal for professionals who are responsible for implementing and maintaining Fortinet products in their organization. The NSE4_FGT-7.2 certification exam is a comprehensive test that covers a wide range of topics, including network security, firewall policies, VPNs, and web filtering.
Valid NSE4_FGT-7.2 Test Answers & Fortinet NSE4_FGT-7.2 Exam PDF: https://www.guidetorrent.com/NSE4_FGT-7.2-pdf-free-download.html
Realistic NSE4_FGT-7.2 Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=18XbQe8xkspZ7A9J_mXBWcGqun2IASwQy