Authentic Best resources for 300-625 Test Engine Practice Exam
[2021] 300-625 PDF Questions - Perfect Prospect To Go With GuideTorrent Practice Exam
NEW QUESTION 16
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry control stats
- B. show telemetry transport
- C. show analytics system-load
- D. show telemetry pipeline stats
Answer: D
NEW QUESTION 17
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non-disruptive upgrade?
- A. The Fibre Channel and FCoE storage targets are connected.
- B. The Fibre Channel storage target is connected.
- C. The Cisco Fabric Services operation in progress.
- D. The Fibre Channel host initiator is connected.
Answer: B
NEW QUESTION 18
What does an unlicensed DCNM SAN fail to display?
- A. historical performance monitoring
- B. Fibre Channel, FCoE, and iSCSI topologies
- C. events and fault management
- D. real-time performance monitoring
Answer: D
NEW QUESTION 19
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN 10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - B. switch(config)# port-security activate vsan 10
- C. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48 - D. switch(config)# feature port-security
switch(config)# port-security activate vsan 10
Answer: B
NEW QUESTION 20
A network engineer must run a core Cisco Nexus 9500 Series Switch as a POAP server for all top-of-rack Cisco Nexus switches Which two network functions must run to provide the POAP service? (Choose two)
- A. DNS
- B. TFTP
- C. DHCP
- D. PXE
- E. BOOTP
Answer: B,E
NEW QUESTION 21
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
- A. The rcf-reject option is enabled on the interfaces.
- B. The autoreconfigure option is disabled on both switches.
- C. The autoreconfigure option is enabled on both switches.
- D. The rcf-reject option is disabled on the interfaces.
Answer: B
NEW QUESTION 22
Refer to the exhibit.
Refer to the exhibit. Which command is used to determine which switch has the lock?
- A. show fcs ie vsan
- B. show zoneset active
- C. show flogi database
- D. show zont status
Answer: D
NEW QUESTION 23
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non-d.sruptive upgrade?
- A. The Fibre Channel and FCoE storage targets are connected.
- B. The Cisco Fabric Services operation in progress.
- C. The Fibre Channel storage target is connected.
- D. The Fibre Channel host initiator is connected.
Answer: D
NEW QUESTION 24
After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?
- A. at the scheduled time
- B. when the user logs out of a session
- C. immediately
- D. when the user creates a new session
Answer: D
NEW QUESTION 25
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. Aliases must be saved within a central database on the fabric
- B. The zone database must be distributed over the fabric
- C. All aliases being used are being configured in the same VSAN
- D. The same alias must be used in zoning as well as DPVM
Answer: D
NEW QUESTION 26
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0xxfc0e
- B. 0x8914
- C. 0x8906
- D. 0x8913
Answer: B
NEW QUESTION 27
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. microloader
- B. operating system
- C. hardware anchor
- D. bootloader
- E. kemel
Answer: B,D
NEW QUESTION 28
Refer to the exhibit.
Refer to the exhibit. Which configuration change improves the ability of the link to recover from frame loss?
- A. Increase the send buffer size to 15000 KB.
- B. Disable PMTU discovery.
- C. Enable selective acknowledgment.
- D. Increase the reset timeout.
Answer: B
NEW QUESTION 29
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. gRPC transport
- B. gRPC encoding
- C. GPB encoding
- D. RPC transport
- E. GPB transport
Answer: A,C
Explanation:
Section: Management and Monitoring
NEW QUESTION 30
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. E
- B. NP
- C. F
- D. N
Answer: D
NEW QUESTION 31
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs.
Which feature must be configured to ensure continued operation?
- A. IVR NAT
- B. virtual domains
- C. transit VSANs
- D. auto topology
Answer: A
NEW QUESTION 32
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. commit
- C. force
- D. clear
Answer: D
NEW QUESTION 33
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?
- A. All switches on the fabric must be configured for the same password.
- B. NTP must be configured on all devices or the configuration fails.
- C. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
Answer: B
NEW QUESTION 34
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. IVR NAT
- B. virtual domains
- C. transit VSANs
- D. auto topology
Answer: A
NEW QUESTION 35
Drag and Drop Question
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Answer:
Explanation:
NEW QUESTION 36
Refer to the exhibit.
A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range. - B. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A. - C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - D. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
Answer: C
NEW QUESTION 37
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. management server
- B. name server
- C. time server
- D. fabric controller
Answer: D
NEW QUESTION 38
Drag and Drop Question
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 39
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN 10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration Which configuration must be applied?
- A. switch(config)# port-security activate vsan 10
- B. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 - C. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48 - D. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no-auto-learn
Answer: B
NEW QUESTION 40
......
Best updated resource for 300-625 Online Practice Exam: https://www.guidetorrent.com/300-625-pdf-free-download.html