Correct Answer:

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the newly created custom all-employee business role to your own business user, save the assignment, refresh the browser, and then verify that the new Launchpad Space and its tiles are visible on the homepage.
This is the final verification step for the all-employee role and launchpad setup.
Business Scenario Explanation
In the previous tasks, you created and configured:
a new custom business role for all employees,
the required business catalogs,
a custom launchpad space,
a custom launchpad page,
and the employee self-service tiles:
Manage My Timesheet
Concur Travel Expense
However, even if all of that is configured correctly, you still will not see the new page and tiles on your homepage until the custom role is assigned to your own business user.
This task connects the configuration to your user and verifies the final end-user result.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact business role ID.
Save the user after adding the role.
Refresh the browser after saving.
Then navigate back to Home and confirm the space/page/tiles are visible.
Required Business Role
Assign the custom all-employee role created earlier:
Business Role ID: Z_EMPLOYEES_ALL_######
Business Role Description: All Employee Role ######
Example
If your suffix is 000013, the role is:
Z_EMPLOYEES_ALL_000013
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Users"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Search for:
Maintain Business Users
Open the app.
Explanation:
This app is used to assign business roles to users.
The launchpad space and tiles will only become visible after the custom role is assigned to your own user.
Step 2: Search for your own business user
In Maintain Business Users:
Enter your own user name or business user ID in the search field.
Click Go.
Explanation:
You must assign the role to your own user because you are the one who will verify the launchpad result on the homepage.
Step 3: Open your user record
From the search results:
Click your user entry.
Open the user details page.
Explanation:
This opens the maintenance page where assigned business roles can be reviewed and changed.
Step 4: Switch to Edit mode
On the business user page:
Click Edit
Explanation:
Without edit mode, the role assignment list is display-only.
Step 5: Open the "Assigned Business Roles" tab
Inside the user record:
Click:
Assigned Business Roles
Explanation:
This tab contains the list of all business roles currently assigned to your user and is the correct place to add the all-employee role.
Step 6: Click Add
In the Assigned Business Roles section:
Click Add
This opens the popup:
Add Business Roles
Explanation:
This popup allows you to search for and assign the custom all-employee role.
Step 7: Search for the custom all-employee role
In the Add Business Roles popup:
In the business role search field, enter:
Z_EMPLOYEES_ALL_######
Click Go
Select the role:
Z_EMPLOYEES_ALL_######
All Employee Role ######
Example
If your suffix is 000013, search for:
Z_EMPLOYEES_ALL_000013
Explanation:
This is the custom role created in the earlier launchpad/employee-role tasks.
It contains the launchpad space, catalogs, and page content that must now become visible to your user.
Step 8: Add the role
After selecting the role:
Click OK or Apply
Explanation:
This adds the role to your user in draft mode.
Step 9: Save the business user
Back on the business user page:
Click Save
Explanation:
This is a mandatory step.
Without saving, the role assignment is not finalized, and the new launchpad content will not appear for your user.
Step 10: Confirm the role assignment
After saving, verify that your assigned roles list includes:
Z_EMPLOYEES_ALL_######
All Employee Role ######
Explanation:
This confirms that the role is now officially assigned to your user.
Step 11: Refresh the browser
After saving:
Refresh the browser completely
Explanation:
SAP launchpad content is often cached in the current session.
A browser refresh ensures the newly assigned role content is loaded.
Step 12: Navigate back to Home
After refreshing:
Return to Home
Explanation:
The role's launchpad space and page must be verified from the end-user homepage, not only from configuration apps.
Step 13: Open the page / launchpad tab
On the homepage, look for the custom page/tab that contains the employee content.
In your run, the visible page was:
General
Explanation:
The launchpad page created earlier was titled General, so that is the page you should open to verify the result.
Step 14: Verify the section title
On the page, confirm that you can see the section:
Self-Services
Explanation:
This was the section title created in the earlier page-content maintenance task.
Step 15: Verify the tiles
Under the Self-Services section, confirm that both tiles are visible:
Concur Travel Expense
Manage My Timesheet
Explanation:
These are the two required employee self-service tiles added to the page in the previous task.
Seeing both of them confirms that:
the catalogs were assigned correctly,
the launchpad page was maintained correctly,
the business role was assigned correctly,
and the browser refresh loaded the new content successfully.
Expected Result
After completing this task successfully:
your own user has the custom business role assigned,
the role is saved successfully,
after browser refresh the launchpad updates,
the homepage shows the new launchpad page,
the Self-Services section is visible,
and the tiles Concur Travel Expense and Manage My Timesheet are visible.

Correct Answer:

See Explanation below for all solution
Explanation:
Task 8: Create a New Business Role (Not from a Template)
Objective
The purpose of this task is to create a new custom business role for all employees in the organization. This role is intended to become the base role that will later be connected to the required business catalogs, launchpad space, and page so that employees can easily access the relevant apps.
This task explicitly says:
create a new business role
not from a template
use the exact values provided in the task
Business Scenario Explanation
You are building a role for all employees in the organization.
Unlike the earlier project-manager role, this one is not derived from a standard SAP template.
The purpose of this role is to provide a shared employee-level launchpad structure.
Later, the role will be used to:
assign business catalogs,
create a launchpad space,
create a launchpad page,
place apps on the page for employee self-service access.
In this step, the focus is only on creating the new business role with the correct identification and access category settings.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the values exactly as shown.
Do not create this role from a template.
The access categories must be set exactly as required:
Unrestricted for all categories
Save the role at the end.
Required Values
Use the following values exactly as shown in the task screenshot

Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to create, maintain, copy, derive, and restrict business roles.
Since this task requires creating a brand new custom role, this is the correct place to start.
Step 2: Start creating a new business role
Inside Maintain Business Roles:
Click New
Explanation:
This task explicitly says to create a role not from a template.
So you must use New, not:
Create From Template
Create Derived Business Role
Copy
Using New creates a completely customer-defined business role.
Step 3: Enter the business role ID
In the new business role creation screen:
In Business Role ID, enter:
Z_EMPLOYEES_ALL_######
Example
For suffix 000013:
Z_EMPLOYEES_ALL_000013
Explanation:
This is the technical identifier of the new business role.
It must match the task exactly for validation to succeed.
Step 4: Enter the business role description
In Business Role Description, enter:
All Employee Role ######
Example
For suffix 000013:
All Employee Role 000013
Explanation:
This is the readable description shown in SAP and should exactly match the exercise requirement.
Step 5: Set access categories
In the Access Categories section, set all categories to:
Write, Read, Value Help = Unrestricted
Read, Value Help = Unrestricted
Value Help = Unrestricted
Explanation:
The task explicitly says:
Access Categories: Unrestricted for all categories
So all three category dropdowns must be left or set to Unrestricted.
This means:
the role is not restricted by country, company code, or other field-level limitation in this step, this role is intended to be broadly reusable for all employees.
Step 6: Review the role before saving
Before saving, verify:
Business Role ID is correct
Business Role Description is correct
all 3 access category values are Unrestricted
Explanation:
This avoids common mistakes such as:
wrong suffix,
extra spaces,
restricted instead of unrestricted values,
creating from template accidentally.
Step 7: Save the role
Click:
Save
Explanation:
This finalizes the new business role.
Without saving, the role remains only in draft and is not actually created.
Step 8: Verify the role after save
After saving, confirm that the role is displayed with:
Business Role ID = Z_EMPLOYEES_ALL_######
Business Role Description = All Employee Role ######
Write Access / Read Access / Value Help Access = Unrestricted
Explanation:
This is the confirmation that the role was created successfully and matches the task requirement.
Expected Result
After the task is completed successfully:
a new custom business role exists,
it was created not from a template,
the role ID and description match the required values,
all access categories are Unrestricted,
the role is saved and available for the next steps.