C_S43_2023 Practice SAP Verified Answers - Pass Your Exams For Sure! [2025]
Valid Way To Pass SAP Certified Associate's C_S43_2023 Exam
SAP C_S43_2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 19
Which of the below objects can you assign in a notification item? Note: There are 2 correct answers to this question
- A. Only one cause of damage
- B. One or more object parts
- C. Only one object part
- D. One or more causes of damage.
Answer: B,D
Explanation:
A notification item is used to describe a problem, damage, or the activity executed in greater detail. A notification item can be assigned to one or more object parts and one or more causes of damage. An object part is a component of a technical object that is affected by a malfunction or damage. A cause of damage is a factor that leads to a malfunction or damage. You can use catalogs to enter object parts and causes of damage in a coded form. Therefore, the correct answers are B and D.
References:
* SAP Help Portal - Notification Item
* SAP Help Portal - Object Part
* SAP Help Portal - Cause of Damage
* [SAP Learning - Creating Notifications]
NEW QUESTION # 20
You want to assign components to a General Maintenance Task List.
What are prerequisites for assigning material components to a task list operation? Note: There are 2 correct answers to this question.
- A. Assign the header material of a material BOM to the assembly field of the task list header.
- B. Assign the header material of a material BOM as assembly to a task list operation.
- C. Assign a piece of equipment with allocated material BOM to a task list operation.
- D. Assign the BOM usage for free assignment of material in Customizing.
Answer: A,D
Explanation:
Preventive Maintenance
NEW QUESTION # 21
What are valid item categories for a BOM used in Asset Management? Note: There are 3 correct answers to this question.
- A. E (Equipment)
- B. L (Stock item)
- C. D (Document item)
- D. F (Functional location)
- E. I (PM Structure element)
Answer: A,C,E
NEW QUESTION # 22
What are characteristics of the structure indicator? Note: There are 2 correct answers to this question
- A. It sets the hierarchy levels of the functional location structure.
- B. It defines the allowed characters for a functional location
- C. It limits the types of characters in the edit mask to Alpha and Numeric.
- D. It restricts the number of hierarchical levels to no more than 6
Answer: A,B
Explanation:
The structure indicator is a key that defines the allowed characters and the hierarchy levels of the functional location structure. It consists of an edit mask and a hierarchy indicator. The edit mask defines the allowed characters for each position of the functional location identification. The hierarchy indicator defines the hierarchy levels of the functional location structure and the number of characters for each level. For example, a structure indicatorwith the edit mask ANNNN-NNNN and the hierarchy indicator 5-4 means that the functional location identification can have up to 9 alphanumeric characters, divided into two levels with 5 and
4 characters respectively, separated by a hyphen. The structure indicator does not limit the types of characters to alpha and numeric, as it can also include special characters, such as hyphens, slashes, or dots. Therefore, answer A is incorrect. The structure indicator also does not restrict the number of hierarchical levels to no more than 6, as it can have up to 10 levels. Therefore, answer B is also incorrect. References: Explaining Technical Asset Structures - SAP Learning and Organizational Elements and Structures | SAP Help Portal.
NEW QUESTION # 23
To which objects can a personnel number be directly assigned? Note: There are 2 correct answers to this question?
- A. Work center
- B. Planner group
- C. Business partner
- D. Maintenance plan
Answer: A,C
Explanation:
* A personnel number is a unique identifier for an employee in the SAP system. A personnel number can be directly assigned to the following objects:
* C. Work center. A work center is a location where maintenance activities are performed. A work center can have one or more personnel numbers assigned to it, which represent the employees who work at that location. The personnel numbers can be used for capacity planning, scheduling, and confirmation of maintenance orders1.
* D. Business partner. A business partner is a person or an organization that has a business relationship with the company. A business partner can have one or more roles, such as customer, vendor, or contact person. A personnel number can be assigned to a business partner role, which allows the system to identify the employee who is responsible for the business partner or who acts as a contact person for the business partner2.
* A personnel number cannot be directly assigned to the following objects:
* A. Planner group. A planner group is a group of employees who are responsible for planning and processing maintenance orders. A planner group is assigned to a maintenance order header, but not to a personnel number. A planner group can have one or more work centers assigned to it, which in turn can have personnel numbers assigned to them3.
* B. Maintenance plan. A maintenance plan is a document that defines the frequency and scope of preventive maintenance activities for technical objects. A maintenance plan is assigned to a maintenance item, which contains the technical object and the task list for the maintenance activities. A maintenance plan does not have a direct assignment to a personnel number, but it can have a planner group assigned to it, which can have work centers and personnel numbers assigned to it. References: 1: Work Center 2: Business Partner 3: Planner Group : [Maintenance Plan]
NEW QUESTION # 24
Which views can you assign to an equipment category via a view profile? Note: There are 2 correct answers to this question?
- A. Serial data
- B. Configuration
- C. Manufacturer data
- D. Warranty
Answer: C,D
Explanation:
An equipment category defines the technical characteristics of an equipment and the views that are available for it. A view profile is a set of views that can be assigned to an equipment category. The views that can be assigned to an equipment category via a view profile are:
* Basic data
* Classification
* Location
* Organization
* Partner
* Status
* Structure
* Warranty
* Manufacturer data
* Measurement document
* History
* Permits
* Documents
* User fields
* Serial data
* Configuration
* Object links
* Time-dependent data
* Linear data
* Geographical data
* Maintenance plan
* Maintenance item
* Maintenance task list
* Maintenance order
* Maintenance notification
* Service order
* Service notification
* Service contract
* Service confirmation
* Service quotation
* Service request
* Service plan
* Service item
* Service task list
* Service product
* Service product allocation
* Service product structure
* Service product location
* Service product partner
* Service product status
* Service product classification
* Service product documents
* Service product permits
* Service product user fields
* Service product serial data
* Service product configuration
* Service product object links
* Service product time-dependent data
* Service product linear data
* Service product geographical data
Among these views, the ones that match the options given in the question are Warranty and Manufacturer data. Therefore, the correct answers are A and D.
References:
* SAP Help Portal - Equipment Category
* SAP Help Portal - View Profile
NEW QUESTION # 25
You are analyzing the data transfer of the cost center of a piece of equipment. What are the possible data origins? Note: There are 2 correct answers to this question
- A. The cost center of the related maintenance work center
- B. The reference functional location of the superior functional location
- C. The cost center of the superior equipment
- D. The individual maintenance of the cost center in the equipment master record
Answer: C,D
NEW QUESTION # 26
Where can the maintenance planner perform a material availability check?
- A. Via the SAP Fiori app "Maintenance Backlog Overview"
- B. Via a SAP Fiori-based background job
- C. Via the SAP Fiori app "Maintenance Scheduling Board"
- D. Via the SAP Fiori app "Manage Maintenance Planning Buckets"
Answer: A
Explanation:
Maintenance Processing - Basic Functions
NEW QUESTION # 27
How do you map a counter replacement in SAP S/4HANA Asset Management?
- A. Create a new measurement document marked as a counter replacement.
- B. Create a new measurement document and assign a valuation code for counter replacement.
- C. Deactivate the current counter and create a new counter.
- D. Assign a catalogue type for counter replacement to the measuring point category.
Answer: A
NEW QUESTION # 28
Where can the maintenance planner perform a material availability check? Note: There are 2 correct answers to this question?
- A. Via the SAP Fiori app "Maintenance Scheduling Board"
- B. Within the SAP Fion-based background job
- C. Via the SAP Fiori app "Manage Maintenance Order List"
- D. Via the SAP Fiori epp "Manage Maintenance Planning Buckets"
Answer: B,C
NEW QUESTION # 29
You cancel the technical completion of a work order. What are the effects? Note: There are 2 correct answers to this question?
- A. Referenced notifications are put in Process again.
- B. Open purchase requisitions are recompiled
- C. Open reservations are recompiled.
- D. Open purchase orders are recompiled.
Answer: B,C
NEW QUESTION # 30
Which functions characterize a Strategic analysis as opposed to embedded analysis within the SAP S/4HANA core system? Note: There are 2 correct answers to this question
- A. SAP Business Objects as a part of SAP Business Warehouse (BW)
- B. SAP Business Objects Business Intelligence for Visualization
- C. A collection of tools that are not included with core SAP S/4HANA
- D. Preconfigured Core Data Service (CDS) containing SQL views
Answer: B,C
Explanation:
Strategic analysis is a type of analysis that provides a high-level overview of the business performance and trends, as well as the ability to drill down into the details and perform root cause analysis. Strategic analysis is typically performed by business analysts or managers who need to make strategic decisions based on the data.
Strategic analysis requires a collection of tools that are not included with core SAP S/4HANA, such as SAP Analytics Cloud, SAP Business Planning and Consolidation, SAP Business Warehouse, and SAP Business Objects Business Intelligence. These tools enable the integration, transformation, modeling, and visualization of data from various sources, including SAP S/4HANA and other systems. Embedded analysis, on the other hand, is a type of analysis that provides real-time insights into the operational data within the SAP S/4HANA core system. Embedded analysis is typically performed by end users or operational managers who need to monitor and optimize the business processes and transactions. Embedded analysis relies on preconfigured Core Data Services (CDS) views that contain SQL views of the data in SAP S/4HANA. These views can be accessed by SAP Fiori apps, SAP Smart Business KPIs, or SAP Analysis for Microsoft Office. SAP Business Objects is not a part of SAP Business Warehouse, but a separate product that can connect to SAP Business Warehouse or other data sources. Therefore, option C is incorrect. References:
* SAP S/4HANA Asset Management - Analytics, section "Strategic Analysis"
* SAP S/4HANA Asset Management - Analytics, section "Embedded Analysis"
* SAP S/4HANA Asset Management - Analytics, section "SAP BusinessObjects Business Intelligence"
NEW QUESTION # 31
You want to create a maintenance order with an external order operation that includes service items.
How can you achieve this?
Note: There are 2 correct answers to this question.
- A. The assignment of a control key with the service indicator set is mandatory.
- B. The usage of a model service specification is mandatory.
- C. The actual value entry can be recorded only via the service entry sheet.
- D. The assignment of a control key with key externally processed operation is sufficient.
Answer: A,B
Explanation:
Maintenance Processing - Basic Functions
NEW QUESTION # 32
What are characteristics of the Preparation and Scheduling phase within phase-based maintenance? Note:
There are 2 correct answers to this question
- A. The order moves to the Preparation phase once it is approved and released
- B. If you use the Resource Scheduling apps, you always dispatch orders and operations.
- C. Maintenance Planning Buckets give you a list of non-approved notifications
- D. The configuration of the order type decides whether you use Resource Scheduling or not.
Answer: A,D
Explanation:
The Preparation and Scheduling phase within phase-based maintenance is the phase where the maintenance planner divides the maintenance effort into manageable groups, levels out the workload over several weeks, determines the concrete time period for the requested maintenance work, and checks the availability of all the resources, spare parts and services needed1.
Option B (The order moves to the Preparation phase once it is approved and released) is correct, because the approval and release of the order is the last step of the previous phase (Approval phase)2. Once the order is approved and released, it is ready for preparation and scheduling.
Option D (The configuration of the order type decides whether you use Resource Scheduling or not) is also correct, because the order type determines whether the order is relevant for resource scheduling or not2. Resource scheduling is an optional step in the Preparation and Scheduling phase, where the planner can assign and dispatch the orders and operations to the technicians using the Resource Scheduling apps2.
Option A (If you use the Resource Scheduling apps, you always dispatch orders and operations) is incorrect, because the Resource Scheduling apps allow the planner to either dispatch or assign the orders and operations2. Dispatching means that the planner assigns a specific technician and a specific time slot for the order or operation, while assigning means that the planner assigns only a technician or a team, but not a specific time slot2.
Option C (Maintenance Planning Buckets give you a list of non-approved notifications) is also incorrect, because the Maintenance Planning Buckets app gives the planner a list of approved and released orders that are ready for preparation and scheduling2. The non-approved notifications are handled in the previous phase (Screening phase)2.
References:
* Phase Model for the Maintenance Process
* New Phase Model for the Maintenance Processes in S/4HANA Cloud
* Explaining the Phase-based Process
* Maintenance Process Phases
NEW QUESTION # 33
Which default object type do you use to settle a refurbishment order?
- A. The WBS element
- B. The material
- C. The cost center
- D. The fixed asset
Answer: B
NEW QUESTION # 34
You want to display additional document information within the document flow of a maintenance order.
For which type of document must this be customized?
- A. Invoice
- B. Goods movement
- C. Purchase order
- D. Service entry sheet
Answer: B
NEW QUESTION # 35
The maintenance engineer creates a maintenance plan for service procurement.
Which of the following objects does the engineer assign to the maintenance plan item? Note: There are
2 correct answers to this question.
- A. Settlement order
- B. Internal order
- C. Purchasing contract
- D. Framework order
Answer: A,D
Explanation:
Preventive Maintenance
NEW QUESTION # 36
......
SAP C_S43_2023 Pre-Exam Practice Tests | GuideTorrent: https://www.guidetorrent.com/C_S43_2023-pdf-free-download.html
C_S43_2023 practice test questions, answers, explanations: https://drive.google.com/open?id=1mBc3UgVpfKENG-TTQ86gwb5lqtFHyu00